background image
LYT0736-001A
Printed in Japan
0101FOV*UN*SN
EN
EN
DIGITAL VIDEO CAMERA
G
R-D
V2000
G
R-D
V1800
GR-DV2000
GR-DV1800
INSTRUCTIONS
Please visit our Homepage on the World Wide
Web and answer our Consumer Survey
(in English only):
http://www.jvc-victor.co.jp/english/index-e.html
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION 5
GETTING STARTED
6 ­ 15
RECORDING
16 ­ 37
Basic Recording For Video ........................ 16
Basic Recording For Digital Still Camera
(D.S.C.) ............................................ 19
Basic Recording For Video And D.S.C. .......... 20
Advanced Features For Video And D.S.C. ...... 22
PLAYBACK
38 ­ 51
Basic Playback For Video ......................... 38
Advanced Features For Video .................... 39
Basic Playback For D.S.C. ........................ 42
Advanced Features For D.S.C. ................... 44
CONNECTIONS
52 ­ 55
Basic Connections .................................. 52
Advanced Connections ............................ 54
DUBBING
56 ­ 60
Dubbing To A VCR ................................. 56
Dubbing From A VCR .............................. 57
Dubbing To A Video Unit
Equipped With A DV Connector ................ 58
Dubbing From A Video Unit
Equipped With A DV Connector ................ 59
Dubbing Images Recorded
On A Tape To A Memory Card ................. 60
USING THE REMOTE
CONTROL UNIT
61 ­ 72
Slow-Motion Playback, Frame-By-Frame
Playback and Playback Zoom .................. 63
Playback Special Effects .......................... 64
Random Assemble Editing ........................ 65
For More Accurate Editing ........................ 69
Audio Dubbing ...................................... 71
Insert Editing ....................................... 72
TROUBLESHOOTING
73 ­ 79
USER MAINTENANCE
80
INDEX
81 ­ 88
Jack Box ............................................ 81
Controls, Connectors And Indicators ............ 82
Indications .......................................... 84
CAUTIONS
89 ­ 91
TERMS
92 ­ 93
SPECIFICATIONS
94 ­ 95
01 GR-DV2000/1800 EN Cover
01.1.11, 10:15 AM
3


background image
2 EN
This camcorder is designed to be used with PAL-type
colour television signals. It cannot be used for playback
with a television of a different standard. However, live
recording and LCD monitor/ viewfinder playback are
possible anywhere. Use the JVC BN-V408U/V416U/
V428U battery packs and, to recharge them, the provided
multi-voltage AC Power Adapter/Charger. (An appropriate
conversion adapter may be necessary to accommodate
different designs of AC outlets in different countries.)
Using This Instruction Manual
· All major sections and subsections are listed in the Table Of Contents on the cover page.
· Notes appear after most subsections. Be sure to read these as well.
· Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
..... refer to the Index (
pgs. 81 ­ 88) and familiarize yourself with button locations, etc. before use.
..... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use of
this product.
SAFETY PRECAUTIONS
You are recommended to carefully read the cautions on pages 89 through 91 before use.
NOTES:
The rating plate (serial number plate) and safety caution
are on the bottom and/or the back of the main unit.
The rating plate (serial number plate) of the AC Power
Adapter/Charger is on its bottom.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions
contained in the following pages to ensure safe use of this product.
When the equipment is installed in a cabinet or on a
shelf, make sure that it has sufficient space on all sides
to allow for ventilation (10 cm or more on both sides,
on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or
cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should
be placed on the apparatus.
When discarding batteries, environmental problems must
be considered and the local rules or laws governing the
disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places with
water.
Also do not place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire
or electric shock may be caused.)
Caution: (applies to Jack Box)
To reduce the risk of fire, do not remove
cover. No user-serviceable parts inside.
Refer servicing to qualified service person.
CAUTIONS:
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified
personnel.
When you are not using the AC Power Adapter/
Charger for a long period of time, it is recommended
that you disconnect the power cord from AC outlet.
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace the
fuse cover.
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug immediately, to
avoid possible shock hazard by inadvertent connection
to the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger Terminal
coded E or Green.
The wires in the mains lead are coloured in accordance
with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt -- consult a competent electrician.
IMPORTANT (for owners in the U.K.)


background image
EN
3
This camcorder is designed exclusively for the digital
video cassette, SD Memory Card and
MultiMediaCard. Only cassettes marked "
" and
memory cards marked "
" or "
"
can be used with this unit.
Before recording an important scene . . .
..... make sure you only use cassettes with the Mini DV
mark
.
..... make sure you only use memory cards with the
mark
or
.
..... remember that this camcorder is not compatible
with other digital video formats.
..... remember that this camcorder is intended for
private consumer use only. Any commercial use
without proper permission is prohibited. (Even if
you record an event such as a show, performance or
exhibition for personal enjoyment, it is strongly
recommended that you obtain permission
beforehand.)
Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as lead
to the malfunctioning of internal circuitry. There is
also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
When carrying, be sure to always securely attach
and use the provided shoulder strap. Carrying or
holding the camcorder by the viewfinder and/or the
LCD monitor can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the
cassette holder cover. Do not let children operate
the camcorder, as they are particularly susceptible to
this type of injury.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camcorder.
CAUTION!
Attaching the Jack Box to the camcorder with
cables (S-Video, Editing, DC, etc.) connected,
then leaving it on top of the TV is not
recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.
Attach only the optional JVC VL-V3U Video
Light, VL-F3U Video Flash or MZ-V3U Stereo
Zoom Microphone to the camcorder's Info-Shoe.
SOME DO'S AND DON'TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.
DO
read the operating instructions before you attempt to use the equipment.
DO
ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturer's instructions.
Switch off and withdraw the mains plug when making or changing connections.
DO
consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on equipment.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in
any way -- switch off, withdraw the mains plug and consult your dealer.
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure
that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped
people.
DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements of road
safety. It is illegal to watch television whilst driving.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will
cause damage and shorten the life of the equipment.
DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fit the
manufacturer's approved stand or legs with the fixings provided according to the instructions.
DON'T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
-- NEVER let anyone especially children push anything into holes, slots or any other opening in the case -- this
could result in a fatal electrical shock;
-- NEVER guess or take chances with electrical equipment of any kind -- it is better to be safe than sorry!


background image
4 EN
PROVIDED ACCESSORIES
The provided lens hood helps block
out glare when shooting under
bright sunlight, the same way
professional photographers do.
Align the lens
hood with the
camcorder's lens
and screw it in
clockwise.
Threading
How To Attach The Lens Hood
· Remote Control
Unit RM-V716U
· CD-ROM
The CD ROM contains
the following 5 software
programmes:
· USB Driver Soft
(for Windows®)
· USB Driver Soft
(for Macintosh®)
Presto!
· Mr. Photo
· PhotoAlbum
· ImageFolio
· AAA (R03) Battery x 2
(for remote control unit)
· Jack Box
CU-V504U
· Editing Cable
· Shoulder Strap
· S-Video Cable
· Lens Hood
(See below for
attachment)
· USB Cable
· AC Power Adapter/
Charger AA-V40EG
or AA-V40EK
· Battery Pack
BN-V408U
· DC Cord
· Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
· Cable Adapter
· Core Filter
(for an optional
external microphone)
· MultiMediaCard (8 MB)
(Already inserted in the
camcorder)


background image
EN
5
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when "DEMO MODE" is
set to "ON" (factory-preset).
Available when the Power Switch is set to "
" or "
" and
no cassette is in the camcorder.
Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for
more than 1 minute after that, the demonstration will resume.
"DEMO MODE" remains "ON" even if the camcorder power
is turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch to "
" while pressing down the Lock
Button located on the switch and press the MENU wheel.
The Menu Screen appears.
2. Rotate the MENU wheel to select "
SYSTEM" and press
it. The SYSTEM Menu appears.
3. Rotate the MENU wheel to select "DEMO MODE" and
press it. The Sub Menu appears.
4. Rotate the MENU wheel to select "OFF" and press it.
5. Rotate the MENU wheel to select "1RETURN", and press it
twice. The normal screen appears.
MODE
DEMO
­
ON
OF F
MENU Wheel
Sub Menu
How To Attach Core Filter
Attach the provided Core Filter to an optional external microphone. Core Filter reduces interference.
Release the
stoppers on both
ends of the Core
Filter.
Run the cable through the Core Filter, leaving approx.
3 cm of cable between the cable plug and the Core
Filter. Wind the cable around the outside of the Core
Filter as shown in the illustration.
·Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
Close the Core Filter until it
clicks shut.
3 cm
Stopper
When connecting cables, attach the end with the Core Filter to the camcorder.
12
3
wind once