DE
UTS
CH
FRANÇAIS
IT
ALIANO
ESP
A
Ñ
O
L
ENGLISH
LCD DISPLAY MONITOR
BEDIENUNGSANLEITUNG : LCD-DISPLAYMONITOR
MANUEL D'INSTRUCTIONS : MONITEUR LCD
MANUALE DI ISTRUZIONI : SCHERMO A CRISTALLI LIQUIDI
INSTRUCCIONES : MONITOR PANTALLA LCD
LCD
GD-19L1G
INSTRUCTIONS
GD-17L1G
ENGLISH
INSTRUCTIONS
LCD DISPLAY MONITOR
GD-19L1G
GD-17L1G
Thank you for purchasing this JVC LCD display monitor. Before using it, read
and follow all instructions carefully to take full advantage of the monitor's
capabilities.
(* "LCD" stands for Liquid Crystal Display.)
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
Model No. : GD-19L1GGD-17L1G
Serial No. :
2
Contents
Safety Precautions .................................................................................................... 3
Installation.................................................................................................................. 6
Unpacking the Monitor................................................................................................. 6
Setup ........................................................................................................................... 6
Controls and Features ................................................................................................. 8
Remote control buttons and functions.................................................................... 10
Using Your Monitor .................................................................................................. 11
Turning the Monitor On and Off ................................................................................. 11
Caring for and Cleaning the Monitor............................................................................. 11
Connecting the monitor to the PC .............................................................................. 11
Using the Menu ........................................................................................................ 12
Menu Operation........................................................................................................... 12
Using the Monitor in the PC mode ........................................................................... 17
Basic Connection Example ..................................................................................... 20
Troubleshooting ....................................................................................................... 21
Specifications ............................................................................................................ 22
3
ENGLISH
Safety Precautions
In order to prevent any fatal accidents caused by disoperation or mishandling the monitor, be fully aware of all the
following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present
inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service
personnel. Never try to service it yourself.
WARNING: THIS APPARATUS MUST BE EARTHED.
This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
PRECAUTIONS
Use only the power source specified on the unit.
The '
`(power) button on the monitor or 'POWER OFF' button on the remote control does not fully isolate the
monitor from the AC supply. If you are not going to use the monitor for a long period, be sure to disconnect the
power plug from the AC outlet. The AC outlet shall be installed near the equipment and shall be easily accessible.
Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do
not overload wall outlets or power cords as this can result in a fire or electric shock.
Avoid using this unit under the following conditions:
in extremely hot, cold or humid places,
in dusty places,
near appliances generating strong magnetic fields,
4
in places subject to direct sunlight,
in badly ventilated places,
in automobiles with doors closed.
Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
When dust accumulates on the screen surface, clean it with a soft cloth.
Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
when the power cord is frayed or the plug is damaged,
if liquid has been spilled into the unit,
if the unit has been dropped or the cabinet has been damaged,
when the unit exhibits a distinct change in performance.
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service personnel.
When replacement parts are required, have the service personnel verify in writing that the replacement parts
he/she uses have the same safety characteristics as the original parts. Use of manufacture's specified
replacement parts can prevent fire, shock, or other hazards.
Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety
check described in the manufacturer's service literature.
POWER CONNECTION
The power supply voltage rating of this product is AC 100~240 V, the power cord attached conforms to the following
power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of
each countries.
Power cord
Power supply voltage :
AC 120 V
AC 220~240 V
AC 220~240 V
Countries :
U.S.A. and Canada
European and Asian countries
United Kingdom
Warning:
Do not use the same Power Cord for AC 120 V as for AC 220~240 V. Doing so may cause malfunction, electric
shock or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a
correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver,
And replace the fuse.
(* An example is shown in the illustration.)
Fuse