background image
SERVICE MANUAL
COLOR TELEVISION/
DVD VIDEO PLAYER
FILE NO. 140-200115
MD20FL1C


background image
SERVICING NOTICES ON CHECKING
6. AVOID AN X-RAY
1. KEEP THE NOTICES
As for the places which need special attentions,
they are indicated with the labels or seals on the
cabinet, chassis and parts. Make sure to keep the
indications and notices in the operation manual.
3. USE THE DESIGNATED PARTS
5. TAKE CARE TO DEAL WITH THE
CATHODE-RAY TUBE
In the condition that an explosion-proof cathode-
ray tube is set in this equipment, safety is
secured against implosion. However, when
removing it or serving from backward, it is
dangerous to give a shock. Take enough care to
deal with it.
Safety is secured against an X-ray by consider-
ing about the cathode-ray tube and the high
voltage peripheral circuit, etc.
Therefore, when repairing the high voltage pe-
ripheral circuit, use the designated parts and
make sure not modify the circuit.
Repairing except indicates causes rising of high
voltage, and it emits an X-ray from the cathode-
ray tube.
Please include the following informations when you order parts. (Particularly the VERSION LETTER.)
1. MODEL NUMBER and VERSION LETTER
The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be
found at the end of the SERIAL NUMBER.
2. PART NO. and DESCRIPTION
You can find it in your SERVICE MANUAL.
HOW TO ORDER PARTS
PERFORM A SAFETY CHECK AFTER
SERVICING
7.
Confirm that the screws, parts and wiring which
were removed in order to service are put in the
original positions, or whether there are the
portions which are deteriorated around the
serviced places serviced or not. Check the
insulation between the antenna terminal or
external metal and the AC cord plug blades.
And be sure the safety of that.
(INSULATION CHECK PROCEDURE)
1.
2.
3.
4.
Unplug the plug from the AC outlet.
Remove the antenna terminal on TV and turn
on the TV.
Insulation resistance between the cord plug
terminals and the eternal exposure metal
[Note 2] should be more than 1M ohm by
using the 500V insulation resistance meter
[Note 1].
If the insulation resistance is less than 1M
ohm, the inspection repair should be
required.
[Note 1]
If you have not the 500V insulation
resistance meter, use a Tester.
[Note 2]
External exposure metal: Antenna terminal
Earphone jack
2. AVOID AN ELECTRIC SHOCK
There is a high voltage part inside. Avoid an
electric shock while the electric current is
flowing.
The parts in this equipment have the specific
characters of incombustibility and withstand
voltage for safety. Therefore, the part which is
replaced should be used the part which has
the same character.
Especially as to the important parts for safety
which is indicated in the circuit diagram or the
table of parts as a
mark, the designated
parts must be used.
4. PUT PARTS AND WIRES IN THE
ORIGINAL POSITION AFTER
ASSEMBLING OR WIRING
There are parts which use the insulation
material such as a tube or tape for safety, or
which are assembled in the condition that
these do not contact with the printed board.
The inside wiring is designed not to get closer
to the pyrogenic parts and high voltage parts.
Therefore, put these parts in the original
positions.


background image
GENERAL SPECIFICATIONS
G-1
TV
CRT
CRT Size / Visual Size
20 Inch / 508.0 mmV
System
CRT Type
FLAT
Deflection
90 degree
Magnetic Field BV/BH
+0.45G/0.18G
Color System
NTSC
Speaker
2 Speaker
Position
Front
Size
3 Inch
Impedance
8 Ohm
Sound Output
Max
2.5x2.5 W
10%(Typical)
2.0x2.0 W
G-2
DVD System
Color System
NTSC
Disc
DVD, CD-DA
Disc Diameter
120 mm , 80 mm
Deck
Disc Loading System
Front Loading
Motor
3 Motors
Pick up
1-Lens 2-Beams System
Playback time(Max)
DVD 1DVD 1-Layer
135min
(4.7GB)
DVD 2-Layer
245min
(8.5GB)
CD
74min
VIDEO CD
--min
Search speed
Fwd
2-20 times
Actual
2-45 times
Rev
2-20 times
Actual
2-45 times
Slow speed
Fwd
1/7-1/2 times
Actual
--
Rev
1/7 -1/2 times
Actual
1-2
times
G-3
Tuning
Broadcasting System
US System M
System
Tuner and
System
1Tuner
Receive CH
Channel Tuner
Others
Tuning System
F-Synth
Input Impedance
VHF/UHF 75 Ohm
CH Coverage
Intermediate
Picture(FP)
45.75MHz
Frequency
Sound(FS)
41.25MHz
FP-FS
4.50MHz
Preset CH
--
Stereo/Dual TV Sound
Yes
NTSC Playback (PAL60)
No
G-4
Power
Power Source
AC
120V, 60Hz
DC
--
Power Consumption
at AC
120W
at 120V 60Hz
at DC
--
Stand by (at AC)
8 W
at 120V 60Hz
Per Year
-- kWh/Year
Power Supply Cord
UL
Protector
Power Fuse
Yes
G-5
Signal
Video Signal
Input Level
1 V p-p/75 ohm
Output Level
1 V p-p/75 ohm
S/N Ratio (Weighted)
65dB
Horizontal Resolution at DVD Mode
400 Lines (TV Monitor)
500 Lines ( Video Out)
RGB Signal
Output Level
-- V p-p/75 ohm
Audio Signal
Input Level
RCA -8.0dB/50Kohm
Output Level
RCA -8.0dB/1Kohm
S/N Ratio at DVD (Weighted)
90 dB
Harmonic Distortion
0.01% (1KHz)
Frequency Response :
at DVD
4Hz - 22KHz
at VIDEO CD
--
at CD
4Hz - 20KHz
Digital Audio Signal
Output Level
0.5 V p-p/75 ohm
2~69, 4A, A-5~A-1, A~I, J~W, W+1~W+84


background image
GENERAL SPECIFICATIONS
G-6
Interface
Switch
Front
Power (Tact)
Yes
Channel Up
Yes
Channel Down
Yes
Volume Up
Yes
Volume Down
Yes
Play
Yes
Open/Close
Yes
Skip(>>)
Yes
Skip(<<)
Yes
Still/Pause
No
Stop
Yes
Main Power SW
No
Rear
AC/DC
No
Color On/Off (SECAM Only)
No
Degauss
No
Main Power SW
No
Indicator
Power
Red
Stand-by
No
On Timer
No
Terminals
Front
Video Input
Yes
Audio Input
Yes
(Stereo)
Other Terminal
Head Phone
Rear
Video Input(Rear1)
Yes
Video Input(Rear2)
No
Audio Input(Rear1)
Yes
(Stereo)
Audio Input(Rear2)
No
Video Output
Yes
Audio Output
Yes
(Stereo)
Euro Scart
No
Digital Audio Output
Coaxial
Optical Audio Output
No
Color Stream
No
Diversity
No
Ext Speaker
No
DC Jack 12V(Center +)
No
VHF/UHF Antenna Input
F Type
AC Outlet
No
G-7
Set Size
Approx.
W x D x H (mm)
574x483x514.5
G-8
Weight
Net (Approx.)
25.5kg
Gross (Approx.)
29.0kg
G-9
Regulation
Safety
CSA
Radiation
DOC
X-Radiation
HWC
G-10
Temperature
Operation
5oC ~ 40oC
Storage
-20oC ~ 60oC
G-11
Operating Humidity
Less than 80% RH
G-12
On Screen
Menu(TV)
Yes
Display
Menu Type
Icon
Picture
Yes
Contrast
Yes
Brightness
Yes
Color
Yes
Tint
Yes
Sharpness
Yes
Sound
Yes
Bass
Yes
Treble
Yes
Balance
Yes
CH
Yes
Auto CH Memory
Yes
ADD/DELETE
Yes
TV/CATV
Yes
Option
Yes
Language
Yes
V-Chip
No
Clock
No
Clock Set
No
On/Off Timer
No
Sleep Timer
Yes
CH/AV/DVD
Yes
Stereo, Audio Output, Bilingual
No
Stereo, Mono, SAP(Stereo Only)
Yes
Stereo, Audio Output
No
Sound 1/2
No
SAP (Stereo Only)
Yes
NICAM Auto Off
No
Closed Caption
Yes
System Select
No
Area Code
No
Pin Code Registration
No
Pin Code
No
DVD RGB /Composite
No
Game
Yes
Hotel Lock
No
Volume
Yes
Sound Mute
No


background image
GENERAL SPECIFICATIONS
On Screen
Menu(DVD)
Yes
Display
Menu Type
Character
Rating Level
Yes
Audio
Yes
Sub Title
Yes
TV Screen Size
Yes
OSD Display On/Off
Yes
Menu Language
Yes
Audio Output
No
Set Up Language
Yes
Password Lock/Unlock
Yes
Open
Yes
Close
Yes
No disc
Yes
Reading
Yes
Play
Yes
Still/Pause
Yes
Stop
Yes
Prohibit Mark
Yes
Step
Yes
Next
Yes
Back
Yes
Random
Yes(CD Only)
Repeat
Yes
Slow+ ##
Yes
Slow- ##
Yes
Search+ ##
Yes
Search- ##
Yes
Jump
Yes
Resume
Yes
Title No.
Yes
Chapter No.
Yes
Track No.
Yes
Time
Yes
Sub Title No.
Yes
Angle No.
Yes
Vocal On/Off
Yes
Audio No.
Yes
Audio Stereo L/R
No
Zoom
Yes
Marker No.
No
Program Play Back
Yes(CD Only)
G-13
OSD Language
(TV)
Eng, Fre, Spa
(DVD)
Eng, Fre, Spa