background image
Remote
Commander
Operating Instructions
4-241-675-11(2)
RM-LP211
© 2002 Sony Corporation


background image
2GB
Precautions
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any question or problem
concerning your remote, please consult your
nearest Sony dealer.
About this manual
The instructions in this manual are for model
RM-LP211. Check your model number by
looking at the lower right corner of the front
side.


background image
3GB
Before you use your
remote
Inserting batteries into the
remote
Insert three R6 (size-AA) batteries with the +
and ­ properly oriented in the battery
compartment.
Tip
Under normal conditions, the batteries should last for
about 3 months. When the remote no longer operates
the receiver, replace all the batteries with new ones.
Notes
· Do not leave the remote in an extremely hot or
humid place.
· Do not use a new battery with old ones.
· Do not mix the alkaline batteries and other kinds of
batteries.
· Do not expose the remote sensor of the receiver to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
· If you don't use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Table of Contents
Location of parts and basic
remote operations
Parts description .................................... 4
Table of buttons used to control each
component ....................................... 8
Using the lists
Chart of lists ........................................ 12
Selecting a component ......................... 13
Selecting a sound field ........................ 14
Programming the remote ..................... 15
Performing several commands in
sequence automatically
(Macro Play) .................................. 16
Using the RECEIVER menu ............... 18
Other operations .................................. 18
Additional Information
Troubleshooting ..................... Back cover
Specifications ........................ Back cover
}
]
]
}
}
]


background image
4GB
1 ?/1 switch
Press to turn the receiver on or off.
2 AV ?/1 switch
Press to turn on or off the components that
the remote is programmed to operate. For
details on programming procedure, see
"Programming the Remote" on page 15.
If you press the ?/1 switch (1) at the
same time, it will turn off the main
component and other Sony audio/video
components (SYSTEM STANDBY).
Note
The function of the AV ?/1 switch changes
automatically each time you press FUNCTION
(4). Depending on the component, the above
operation may not be possible or may operate
differently than described.
3 Display window
The current status of the selected
component or a list of selectable items
appears here.
Note
Characters other than letters of the alphabet or
numbers may be displayed incorrectly on the
remote, even if they appear correctly in the
display window on the main unit.
4 FUNCTION button
Press to display the function (component)
list.
See the table on page 8 for information on
the buttons you can use to control each
component.
If you want to change the contents of the
function list to match your particular
components, do the procedure
"Programming the Remote" on page 15.
This chapter provides information on the
location of buttons and how to use them to
perform basic operations.
However, some functions explained in this
section may not operate depending on the
receiver.
For the functions of the receiver you purchased,
refer to the Operating Instructions supplied
with the receiver.
Parts description
Location of parts and basic remote
operations
+
­
+
­
+
­
O
AV ?/1
TV ?/1
SOUND FIRLD
TOP MENU/GUIDE
AV MENU
DISPLAY
TV VOL
TV CH
TV/VIDEO
WIDE
MAIN
MENU
ON SCREEN
RETURN/EXIT
MASTER
VOL
MUTING
FUNCTION
Ii
SYSTEM STANDBY
RM SET UP
?/1
H
Xx
.>
m
M
2
3
qs
qa
4
5
6
7
8
9
0
1


background image
Location
of
parts
and
basic
remote
operations
5GB
5 RM SET UP button
Press to display the set up list.
6 Easy scroll key
While displaying a list, move up or down to
select an item from the list, and then press
to enter the selection.
I/i
buttons
Press to change the information displayed
on the display. Press the I button
repeatedly to display the RECEIVER menu,
press the i button repeatedly to display the
SUB menu (pages 9­11) or NUM menu.
In the NUM menu, move the easy scroll key
to select the numeric value, then press the
key to enter the selection.
7 MUTING button
Press to mute the sound.
8 MASTER VOL +/­ buttons
Press to adjust the volume level of all
speakers at the same time.
9 ON SCREEN button
Press to display the menus of the receiver
on the TV screen.
continued
0 TV buttons
TV/VIDEO button
Press to change the input mode of the TV.
WIDE button
Press to switch the TV to the wide mode.
TV CH +/­
Press to switch the channel.
TV VOL +/­
Press to adjust the volume of TV.
qa SOUND FIELD button
Press to display the sound field list.
qs TV ?/1 switch
Press to turn TV on or off.