background image
Troubleshooting
Symptom
There are drops of water
inside the marine pack.
The recording function does
not work.
Specifications
Material
Plastic (PC, ABS), stainless steel, glass
Water-resistance
O-ring, buckle
Pressure-resistance
To a depth of up to 40 m (132 feet) underwater
Switches that can be externally operated
Power, Mode, Shutter, Zoom, Flash, Macro, Control, Self-timer, Review,
Menu, Image Size/Delete, LCD status/LCD on/off
Dimension
Approx. 148
× 95 × 87 mm (5 7/8 × 3 3/4 × 3 1/2 in.) (w/h/d)
(excluding projecting parts)
Mass
Approx. 410 g (14.5 oz.) (marine pack only)
Included items
Marine pack (1)
Hand strap (1)
Grease (1)
O-ring (1)
Spacer (1)
Set of printed documentation
Optional accessories
Color filter kit VF-MP5K
Arm kit VCT-MP1K
Underwater video light HVL-ML20M (must be used together with arm kit
VCT-MP1K and "InfoLITHIUM" (M series) battery pack, (M series battery
charger))
Design and specifications subject to change without notice.
Marine Pack
2-588-142-11(1)
MPK-WA
© 2005 Sony Corporation Printed in Japan
G
Owner's Record
The model and serial numbers are located inside of the unit.
Record the serial number in the space provided below.
Refer to them whenever you call upon your Sony dealer regarding this
product.
Model No. MPK-WA
Serial No.
Operating Instructions
Mode d'emploi
Manual de instrucciones
Gebruiksaanwijzing
English
Français
Main Feature
Useable at a depth of up to 40 m (132 feet) underwater.
·This marine pack MPK-WA is exclusively for use with the Sony Digital
Still Camera DSC-W7/W5/W17/W15/W1. (Cyber-shot for this marine
pack is not available in all countries.)
·This marine pack is water-resistant, enabling the digital still camera to be
used in the rain, snow or at the beach.
A loose or nipped O-ring, sand or dirt on the O-ring may cause water
leaks under water.
Be sure to check the O-ring before use.
For details, read the O-ring Maintenance Manual.
Notice
·Before using the digital still camera underwater, first take the marine pack
to a depth of about 1 m (3.3 feet) and check that the digital still camera is
operating properly and that the marine pack is not leaking, then
commence your dive.
·In the unlikely event that a malfunction of the marine pack causes damage
due to water leakage, Sony does not guarantee against damages to the
equipment contained in it (digital still camera, battery pack, etc.) and the
recorded contents, nor expenses entailed in the photography.
Precautions
·When using this marine pack while diving, be sure to pay attention to the
surrounding situation. Lack of attention may cause an accident while
diving.
·In case a water leakage is occurred, be sure to pay attention to the
surrounding situation and surface following the safety rules for diving.
·Do not subject the front glass to strong shock, as it may crack.
·Avoid opening the marine pack at the beach or on the water. Preparation
such as installing the digital still camera and changing the "Memory
Stick" should be done in a place with low humidity and no salty air.
·Do not throw the marine pack into the water.
·Avoid using the marine pack in places with strong waves.
·Avoid using the marine pack under the following situations:
­ in a very hot or humid place.
­ in water hotter than 40°C (104°F).
­ at temperatures lower than 0°C (32°F).
In these situations moisture condensation or water leakage may occur and
damage the equipment.
·Use the marine pack for no longer than 30 minutes at a time in
temperatures above 35°C (95°F).
·Do not leave the marine pack under direct sunlight in a very hot and
humid place for a long period of time. If you cannot avoid leaving the
marine pack under direct sunlight, be sure to cover the pack with a towel
or other protection.
·The digital still camera heats up if it is used inside the marine pack for a
long time. Before removing the digital still camera from the marine pack,
leave the marine pack in the shade or other cool place for a while to cool
down.
·If the front protector comes off, reattach it by pressing it on firmly in the
direction of the arrow. (See illustration A)
If sun oil is on the marine pack, be sure to wash it off thoroughly using
lukewarm water. If the marine pack is left with sun oil on its body, the
surface of the marine pack may become discolored or damaged. (such
as cracks on the surface.)
Water leakage
If water happens to leak in, stop exposing the marine pack to water
immediately.
If the digital still camera gets wet, take it to the nearest Sony dealer
immediately. Repair costs must be borne by the customer.
Anti-fogging effect
Front glass of the marine pack has anti-fogging effect, however install the
digital still camera in a low-humidity room or a similar environment.
O-ring
This equipment uses an O-ring to maintain its water resistance. For details,
refer to the separate O-ring Maintenance Manual.
Improper handling of the O-ring can result in water leakage.
Drip-proof packing
Do not remove or apply grease to the drip-proof packing. If the packing
rises up or is nipped, this may result in water leaks.
If the drip-proof packing comes off, refit it carefully so that it is not twisted.
(See illustration B)
O-ring and drip-proof packing serviceable life
O-ring
The serviceable life of the O-ring varies with frequency of use of the marine
pack and conditions. Generally, it is about one year.
Drip-proof packing
Replace the drip-proof packing with a new one if you find scratches or
cracks on it.
After replacing, check that no water leaks in.
Grease
Use the grease in the blue tube (supplied). Using the grease in the yellow
tube or other manufacturer's grease will damage the O-ring, and cause
water leaks.
O-ring, drip-proof packing and grease
You can obtain the O-ring, drip-proof packing and grease at the nearest
Sony dealer.
O-ring (model No. 3-071-364-01)
Drip-proof packing (model No. 3-080-066-01)
Grease (model No. 3-071-370-01)
Maintenance
After recording
·After recording in a location with a sea breeze, wash the marine pack
thoroughly in fresh water with the buckles fastened to remove salt and
sand, then wipe with a soft dry cloth. It is recommended that you
submerge the marine pack in fresh water for about 30 minutes. If it is left
with salt on it, metal portions may be damaged or rust may form and
cause water leakage.
·If sun oil is on the marine pack, be sure to wash it off thoroughly using
lukewarm water.
·Clean the inside of the marine pack with a soft dry cloth. Do not wash the
inside of the marine pack.
Be sure to perform the above maintenance each time you use the marine
pack. Do not use any type of solvent such as alcohol, benzine or thinner for
cleaning, as this might damage the surface finish of the marine pack.
When storing the marine pack
·Attach the spacer supplied with the marine pack to prevent wear of the O-
ring. (See illustration C)
·Prevent dust from collecting on the O-ring.
·Lightly coat the O-ring with grease and insert it into the seating groove,
then store the marine pack in a cool, well-ventilated location. Do not
fasten the buckle.
·Avoid storing the marine pack in a cold, very hot or humid place, or
together with naphthalene or camphor, as these conditions might damage
the marine pack.
Preparation
Preparing the digital still camera
Install the digital still camera in a low-humidity room or a similar environment.
Opening or closing the marine pack in hot or humid locations may result in
fogging of the front glass.
For details, refer to the operating instructions supplied with the digital still
camera.
1 Remove the wrist strap from the digital still camera.
2Insert the battery pack.
Be sure to use a fully charged battery pack.
3 Insert the "Memory Stick."
4 Turn on the power of the digital still camera.
5 Set the LCD screen to "ON."
6 Set each of the settings on the digital still camera to auto mode.
7 Set the AF illuminator on the digital still camera to "OFF."
This disables use of the AF illuminator.
8 Check the digital still camera's lens and LCD screen for any dirt.
E Installing the digital still camera inside the
marine pack
1 Turn off the power of the digital still camera.
2 Set the Mode dial of the digital still camera to "
." (E-1)
3Open the marine pack. (E-2)
Press the top and bottom OPEN buttons together 1 and release the buckle in the
direction of the arrow 2 to open the marine pack body.
Note
Take care not to lose the spacer as you will need it to store the marine pack.
4 Prepare the marine pack.
Be sure to read the separate O-ring Maintenance Manual.
Important details regarding handling of the O-ring are described in this
manual.
1
Remove the O-ring.
2
Coat the O-ring with grease.
Clean off any sand or dirt on the O-ring, in the seating groove, or on the marine
pack's body where it touches the O-ring. Coat the O-ring with a light, even
layer of grease.
3
Check the drip-proof packing for any sand or dirt.
4
Fit the O-ring to the marine pack.
Notes
· Do not remove the drip-proof packing or coat the drip-proof packing with
grease.
· The marine pack's body may be scratched or water may leak if the cover is
closed with sand or dirt on the O-ring or drip-proof packing.
5 Install the digital still camera inside the marine pack. (E-3)
Always be sure to turn off the power when installing or removing the
digital still camera. The lens may be damaged if the power is on.
Check that the digital still camera is placed correctly.
6 Close the marine pack's body and fasten the buckle. (E-4)
Secure the marine pack's body, and fasten the buckle until it clicks on the top and
bottom side.
Buckle position when closing the marine pack's body
Good example (See illustration E-4 1)
Bad example (See illustration E-4 2)
If you close the buckle as shown in E-4 2, the buckle will be caught,
making it impossible to lock the marine pack.
Note
When closing the marine pack's body, make sure that there is no debris, sand,
hair or any other foreign matter on the O-ring or in the seating groove. Water
leakage may result if any such foreign matter is caught in these places.
F Attach the hand strap
We recommend attaching the hand strap (supplied) before using the marine
pack. (See illustration F)
Note
Be careful not to pinch the hand strap when you open and close the marine
pack body. Water may leak in if you do.
Using the Marine Pack
G Recording
1 Turn on the power. (G-1)
Check that the Mode dial operates normally.
The mode is switched in the following order by turning the Mode dial:
For details of each mode, check in the LCD screen.
2 Set the Mode dial to the desired mode and press the shutter
button. (G-2, 3)
You can record pictures while looking at the LCD screen.
To record still images, set the Mode dial of the digital still camera to "
," "
"
or "
."
To record moving images, set the Mode dial of the digital still camera to "
."
Sound cannot be recorded while recording moving images.
To record pictures in the various scene, set the Mode dial of the digital still camera
to "
," "
," "
," "
," "
," "
" or "
," and select the desired mode.
For details, refer to the operating instructions supplied with the digital still camera.
Note
Do not rotate the mode dial of the digital still camera in the marine pack
excessively. It may cause trouble.
Since the refractive index underwater is higher than that in air, objects
appear 1/4 closer. Therefore when recording underwater with focus preset,
the distance you set and actual distance to the objects is different.
H Using/Setting various functions
You can use the various functions of the digital still camera installed in the
marine pack.
I Use the zoom
Press the zoom button.
1
Press on the W side for wide-angle. (Subject appears farther away.)
2
Press on the T side for telephoto. (Subject appears closer.)
Notes
·You cannot record images while looking through the finder.
·If you do not operate the digital still camera with the power on for a
certain time, the digital still camera turns off automatically to prevent the
battery pack from wearing down. To use the digital still camera again,
turn on the power again. For details, refer to the operating instructions
supplied with the digital still camera.
J Playing back with the control button
You can play back images on the LCD screen using the control button. You
cannot hear the sound.
1 Turn on the power. (J-1)
2 Set the Mode dial to "
." (J-2)
3 Select the desired image with the control button. (J-3)
J-3 1 To previous image
J-3 2 To next image
For details, refer to the operating instructions supplied with the digital still camera.
K Removing the digital still camera
1 Turn off the power. (K-1)
Always be sure to turn off the power when installing or removing the
digital still camera. The lens may be damaged if the power is on.
2Open the marine pack. (K-2)
Press the top and bottom OPEN buttons together 1 and release the buckle in the
direction of the arrow 2 to open the marine pack body.
3 Remove the digital still camera from the marine pack.
When the digital still camera has been used for a long time, the digital still camera
heats up. Turn off the power and leave for a while to cool down before removing
the digital still camera from the marine pack.
Be careful not to drop the digital still camera when removing it.
Note
Before opening the marine pack, rinse it with tap water or fresh water and
then wipe the water off with a soft cloth. When opening it, be careful not to
let any water from your body, hair or wetsuit cuffs drip onto the digital still
camera.
Before making a dive
·Before recording images underwater, first take the marine pack to a depth
of about 1 m (3.3 feet) and check that it operates properly and that there
are no leaks, then commence your dive.
·Install the digital still camera in the marine pack before diving, and avoid
opening and closing the marine pack while on board boats or at the
seashore as much as possible. When installing the digital still camera, do it
in a place that has as low a humidity as possible.
·Before using the marine pack, make sure that no debris has been caught
between the front and back halves of the marine pack's body.
·In images recorded underwater, the subject sometimes has a bluish cast.
To correct the color when this happens, use the color filter kit VF-MP5K*
(optional).
* The diffuser supplied with the VF-MP5K is not available when using
the marine pack.
Times that are suited for recording
The most suitable time for recording images is between 10:00 AM and 2:00
PM, when the sun is directly overhead.
To record pictures in places where the sunlight does not reach well or at
night, please use the underwater video light HVL-ML20M (optional).
E
H
K
1
2
4
1
1
Buckle
Fermoir
Spacer (remove to use the
marine pack)
Entretoise (à retirer avant
d'utiliser le Marine Pack)
Control button
Touche de commande
12
1
2
F
I
Cause/Corrective Actions
·There are scratches or cracks on the O-ring.
b Replace the O-ring with a new one.
· The O-ring is not set correctly.
b Place the O-ring evenly in the groove.
· The buckle is not fastened.
b Fasten the buckle until it clicks.
· The battery pack has run out.
b Charge the battery pack fully.
· The "Memory Stick" is full.
b Insert another "Memory Stick" or erase
unneeded data from the "Memory Stick."
· The write-protect tab on the "Memory Stick"
is set to LOCK.
b Set the tab to the recording position or
insert a new "Memory Stick."
E
A
3
T
W
J
OPEN button
Touches OPEN
(Image Size/Delete)
button
Touche
(Taille de
I'image/Suppression)
12
1
Enter/Control button
Validation/
Touche de commande
(flash)button/Control button
Touche
(flash)/Touche de commande
(macro)button
/Control button
Touche
(macro)/
Touche de commande
(review)button
/Control button
Touche
(revue)/
Touche de commande
2
3
2
MENU button
Touche MENU
D
B
C
Hook for hand strap
Crochet pour
courroie de mein
Shutter button
Déclencheur
POWER button
Commutateur
d'alimentation
Front glass
Verre avant
Front protector
Protection avant
Tripod receptacle
When using a tripod, use a tripod with 5.5 mm
or shorter screws. This equipment cannot be
firmly fastened on a tripod with long screws.
Doing so might damage this equipment.
Filetage pour trépied
Utilisez un trépied dont la vis mesure 5,5 mm
de long ou moins. Cet équipement ne peut pas
se fixer solidement sur un trépied à vis longue.
Celle-ci pourrait aussi l'endommager.
MENU button
Touche MENU
Drip-proof packing
Garniture pare-gouttes
Zoom (W/T) buttons/
(Index)
buttons/
/
(Playback zoom)
buttons
Touches de Zoom (W/T)/
(Touches d'indexation)/
/
(Pendant la lecture)
(LCD status/
LCD on/off) button
Touche
(Etat
LCD/Marche/Arrêt
LCD)
O-ring
Joint torique
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
(LCD status/
LCD on/off) button
Touche
(Etat
LCD/Marche/Arrêt
LCD)
2
3
Mode dial
Sélecteur Mode
Caractéristique principale
Utilisable jusqu'à une profondeur de 40 mètres (132 pieds) sous
l'eau.
·Le caisson étanche MPK-WA est conçu spécialement pour l'appareil photo
numérique Sony DSC-W7/W5/W17/W15/W1. (Le Cyber-shot pour
lequel ce caisson a été conçu n'est pas commercialisé dans tous les pays.)
·Ce caisson est étanche à l'eau, ce qui permet d'utiliser l'appareil photo
numérique sous la pluie, la neige ou au bord de la plage.
Un joint torique relâché ou pincé ou la présence de sable ou de saletés
sur le joint peut entraîner des infiltrations d'eau.
Vérifiez le joint torique avant d'utiliser l'équipement. Pour plus
d'informations, reportez-vous au Mode d'emploi du joint torique.
Avertissement
·Avant de plonger pour une prise de vues sous-marine, immergez le
Marine Pack à 1 mètre (3,3 pieds) sous l'eau environ et assurez-vous que
l'eau ne s'infiltre pas à l'intérieur et que l'appareil photo numérique
fonctionne correctement.
·Dans le cas très improbable où une anomalie du Marine Pack causerait
des dommages dus à une infiltration d'eau, notez que la garantie Sony ne
couvre pas les dommages subis par le matériel (appareil photo
numérique, batterie, etc.) à l'intérieur du Marine Pack, le contenu
enregistré ou les frais encourus pour la prise de vues.
Précautions
·Lorsque vous utilisez le caisson étanche pour la plongée, faites attention à
l'environnement. Un manque d'attention peut être à l'origine d'un
accident pendant la plongée.
·En cas d'infiltration d'eau, faites attention à l'environnement et remontez
à la surface en respectant les règles de plongée.
·Ne soumettez pas le verre avant à des chocs importants car il pourrait se
fendre.
·N'ouvrez pas le Marine Pack sur la plage ou dans l'eau. Les opérations
préparatoires telles que la mise en place de l'appareil photo numérique et
le changement de « Memory Stick » doivent être effectuées à l'abri de
l'humidité et de l'air salin.
·Ne jetez pas le Marine Pack dans l'eau.
·N'utilisez pas le Marine Pack par fortes vagues.
·N'utilisez pas le Marine Pack dans les conditions suivantes:
­ dans un endroit très chaud ou humide,
­ dans de l'eau chaude à plus de 40°C (104°F),
­ à des températures inférieures à 0°C (32°F).
Dans de telles conditions, le matériel pourrait être endommagé par une
condensation d'humidité ou une infiltration d'eau.
·N'utilisez pas le Marine Pack plus de 30 minutes d'affilée par une
température supérieure à 35°C (95°F).
·Ne laissez pas longtemps le Marine Pack en plein soleil dans un endroit
très chaud et humide. Si vous ne pouvez éviter de le laisser au soleil,
recouvrez-le d'une serviette ou d'une autre protection.
·L'appareil photo numérique s'échauffe s'il est utilisé pendant longtemps à
l'intérieur du Marine Pack. Avant d'en retirer l'appareil photo, laissez
temporairement le Marine Pack à l'ombre ou dans un endroit frais pour
qu'il se refroidisse.
·Si la protection avant se détache, réinstallez-la en appuyant fermement
dessus dans le sens de la flèche. (Voir l'illustration A)
S'il y a de la crème solaire sur le Marine Pack, prenez soin de l'éliminer
convenablement avec de l'eau tiède. Si la surface du boîtier du Marine
Pack est souillée avec de la crème solaire, elle risque d'en être
décolorée et endommagée. (craquelures sur la surface)
Infiltration d'eau
Si de l'eau s'infiltre dans le Marine Pack, arrêtez immédiatement de
l'exposer à l'eau.
Si l'appareil photo numérique est mouillé, portez-le immédiatement chez le
revendeur Sony le plus proche. Les frais de réparation seront à la charge de
l'utilisateur.
Effet antigel
Le verre avant du Marine Pack a un effet antibuée mais il est préférable de
préparer l'appareil photo numérique dans une pièce peu humide ou un
environnement similaire.
Joint torique
L'équipement utilise un joint torique pour garantir son étanchéité. Pour
plus d'informations, reportez-vous au Mode d'emploi séparé du joint
torique.
Une manipulation inadéquate du joint torique peut entraîner une
infiltration d'eau.
Garniture pare-gouttes
Ne retirez pas et ne placez pas de graisse sur la garniture pare-gouttes car
ceci pourrait entraîner une saillie de la garniture hors du boîtier ou son
pincement.
Si la garniture pare-gouttes se détache, remettez-la soigneusement en place
de sorte qu'elle ne soit pas tordue. (Voir l'illustration B)
Durée de service du joint torique et de la garniture pare-
gouttes
Joint touque
La durée de service du joint torique et de la garniture pare-gouttes varie
selon la fréquence d'utilisation du Marine Pack et les conditions
d'entreposage. Elle est généralement d'une année environ.
Garniture pare-gouttes
Remplacez la garniture pare-gouttes par une neuve si elle présente des
éraflures ou des craquelures.
Après le remplacement, assurez-vous qu'il n'y a pas d'infiltration d'eau.
Graisse
Utilisez la graisse du tube bleu (fourni). L'emploi de la graisse du tube
jaune ou d'une graisse d'un autre fabricant endommagerait le joint torique
et entraînerait des infiltrations d'eau.
Joint torique, une garniture pare-gouttes et graisse
Vous pouvez vous procurer des joints toriques, une garniture pare-gouttes
et de la graisse pour objectif chez un revendeur Sony.
Joint torique (No. de modèle : 3-071-364-01)
Garniture pare-gouttes (No. de modèle : 3-080-066-01)
Graisse (No. de modèle : 3-071-370-01)
Entretien
Après la prise de vues
·Après une prise de vues dans un endroit exposé à la brise marine, lavez le
Marine Pack à l'eau douce avec les fermoirs correctement verrouillés pour
en faire partir le sel et le sable, puis essuyez-le avec un chiffon doux et sec.
Il est recommandé de plonger le Marine Pack dans de l'eau douce
pendant 30 minutes environ. Ne laissez pas de sel dessus car il pourrait
attaquer les parties métalliques et de la rouille risquerait de se former et
de causer une infiltration d'eau.
·S'il y a de la crème solaire sur le Marine Pack, prenez soin de l'éliminer
convenablement avec de l'eau tiède.
·Ne lavez pas l'intérieur du Marine Pack, mais nettoyez-le avec un linge
doux et sec.
Effectuez les opérations d'entretien ci-dessus après chaque utilisation du
Marine Pack. N'utilisez aucune sorte de solvant, tel qu'alcool, benzine ou
diluant pour le nettoyage car ces substances peuvent attaquer la finition du
Marine Pack.
Lors du stockage du Marine Pack
·Posez l'entretoise fournie avec le Marine Pack pour protéger le joint
torique contre l'usure. (Voir l'illustration C)
·Empêchez l'accumulation de poussière sur le joint torique.
·Passez une légère couche de graisse sur le joint torique et insérez-le dans
la gorge du boîtier. Rangez ensuite le Marine Pack dans un endroit frais et
bien aéré. Ne verrouillez pas le fermoir.
·Ne rangez pas le Marine Pack dans un endroit froid, très chaud ou
humide ou avec de la naphtaline ou du camphre. Ceci pourrait
l'endommager.
Préparation
Préparation de l'appareil photo numérique
Installez l'appareil photo numérique autant que possible dans un endroit peu
humide En effet, l'ouverture et/ou la fermeture du Marine Pack dans un
endroit chaud ou humide provoquerait de la buée sur le verre avant.
Pour plus d'informations, reportez-vous au mode d'emploi, fourni avec
l'appareil photo numérique.
1 Retirez la sangle de l'appareil photo numérique.
2 Insérez la batterie en place.
Utilisez une batterie complètement chargée.
3 Insérez le « Memory Stick ».
4 Mettez l'appareil photo numérique sous tension.
5 Allumez l'écran LCD.
6 Réglez toutes les fonctions de l'appareil photo numérique en
mode automatique.
7Mettez hors service « OFF » l'éclairage AF de l'appareil photo
numérique.
L'éclairage AF est ainsi invalidé.
8 Assurez-vous que l'objectif et l'écran LCD de l'appareil photo
numérique ne sont pas souillés.
E Mise en place de l'appareil photo
numérique
1 Mettez l'appareil photo numérique hors tension.
2 Placez le sélecteur Mode de l'appareil photo sur «
». (E-1)
3Ouvrez le Marine Pack. (E-2)
Appuyez en même temps sur les touches OPEN supérieure et inférieure 1 pour
libérer le fermoir dans le sens de la flèche 2 et ouvrir le coffret du Marine Pack.
Remarque
Prenez soin de ne pas perdre l'entretoise car elle sera nécessaire lors du rangement
du Marine Pack.
4 Préparez le Marine Pack.
Veillez à lire le Mode d'emploi séparé du joint torique, car il renferme des
informations importantes sur la manipulation du joint torique.
1
Enelevez le joint torique.
2
Enduisez le joint torique avec de la graisse.
Enlevez le sable et les autres saletés sur le joint torique, sur la gorge du joint ou
sur la surface du boîtier entrant en contact avec le joint torique. Enduisez le joint
torique d'une légère couche uniforme de graisse.
3
Assurez-vous que la garniture pare-gouttes est exempte de sable et de saletés.
4
Insérez le joint torique dans le caisson marin.
Remarques
· Ne retirez pas la garniture pare-gouttes et ne l'enduisez pas avec de la graisse.
· Le boîtier risque d'être griffé et de l'eau pourrait s'infiltrer si le couvercle est
refermé alors que du sable ou de la saleté se trouve sur le joint torique ou sur
la garniture pare-gouttes.
5 Installez l'appareil photo numérique dans le Marine Pack. (E-3)
N'oubliez pas de mettre l'appareil photo hors tension lorsque vous
l'installez ou retirer. L'objectif peut être endommagé si vous laissez
l'appareil photo sous tension.
Assurez-vous que l'appareil photo est correctement disposé.
6 Fermez le boîtier latéral et bouclez le fermoir. (E-4)
Tenez bien le boîtier du Marine Pack et bouclez le fermoir sur le haut et le côté des
boutons jusqu'à ce qu'il s'encliquette.
Position du fermoir à la fermeture du boîtier latéral
Position correcte (Voir l'illustration E-4 1)
Position incorrecte (Voir l'illustration E-4 2)
Si vous bouclez le fermoir comme illustré en E-4 2, il sera coincé, ce
qui rendra difficile la fermeture du Marine Pack.
Remarque
Lorsque vous refermez le Marine Pack, assurez-vous qu'il n'y a pas de saletés,
sable, cheveux ou autres corps étrangers sur le joint torique ou dans la gorge du
boîtier. Ceci pourrait provoquer une infiltration d'eau.
F Attachez la sangle
Il est conseillé d'attacher la sangle (fournie) avant d'utiliser le Marine Pack.
(Voir l'illustration F)
Remarque
Attention de ne pas coincer la sangle lorsque vous ouvrez ou fermez le
caisson. De l'eau risque sinon de s'infiltrer à l'intérieur.
Utilisation du Marine Pack
G Prise de vues
1 Mettez l'appareil photo sous tension. (G-1)
Assurez-vous que le sélecteur Mode fonctionne normalement.
Le mode change dans l'ordre suivant par rotation du sélecteur Mode:
Pour les détails sur chaque mode, consultez l'écran LCD.
2 Réglez le sélecteur Mode à la position appropriée et appuyez
sur le déclencheur. (G-2, 3)
Vous pouvez enregistrer des images en regardant l'écran LCD.
Pour enregistrer des images fixes, réglez le sélecteur Mode de l'appareil photo
numérique sur «
», «
» ou «
».
Pour enregistrer des images animées, réglez le sélecteur Mode de l'appareil photo
numérique sur «
».
Il n'est pas possible d'enregistrer des sons en même temps que des images
animées.
Pour filmer des scènes variées, réglez la molette de mode de l'appareil photo sur
«
», «
», «
», «
», «
», «
» ou «
» et sélectionnez le mode
souhaité.
Pour plus d'informations, consultez le mode d'emploi de l'appareil photo
numérique.
Remarque
Ne pas faire trop tourner le sélecteur de mode de l'appareil photo
numérique dans le Marine Pack trop longtemps pour ne pas l'endommager.
Comme l'indice de réfraction de l'eau est supérieur à celui de l'air, les objets
apparaissent 1/4 plus gros. C'est pourquoi si vous filmez avec une mise au
point fixe, la distance réelle du sujet sera différente de la distance préréglée.
H Réglage / Utilisation des diverses fonctions
Vous pouvez utiliser les diverses fonctions de l'appareil photo numérique
lorsqu'il est installé dans le Marine Pack.
I Utilisation du zoom
Appuyez sur la touche de zoom.
1
Appuyez sur le côté W pour une prise de vues au grand angle. (Le sujet
s'éloigne.)
2
Appuyez sur le côté T pour une prise de vues au téléobjectif. (Le sujet
s'approche.)
Remarques
· Il n'est pas possible d'enregistrer des images en regardant par le viseur.
· Si vous n'utilisez pas l'appareil photo numérique pendant un certain
temps lors d'une prise de vues, il s'éteint automatiquement pour
économiser la batterie. Pour utiliser de nouveau l'appareil photo
numérique, remettez-le sous tension, voir le mode d'emploi fourni avec
l'appareil photo numérique.
J Lecture avec la touche de commande
Vous pouvez visionner les images sur l'écran LCD à l'aide de la touche de
commande. Il n'y a pas de son.
1 Mettez l'appareil photo sous tension. (J-1)
2 Réglez le sélecteur Mode sur «
». (J-2)
3 Sélectionnez l'image souhaitée par la touche de commande.
(J-3)
J-3 1 Vers l'image précédente
J-3 2 Vers l'image suivante
Pour plus d'informations, consultez le mode d'emploi de l'appareil photo
numérique.
K Retrait de l'appareil photo numérique
1 Mettez l'appareil photo hors tension. (K-1)
N'oubliez pas de mettre l'appareil photo hors tension lorsque vous
installez ou retirer. L'objectif peut être endommagé si vous laissez
l'appareil photo sours tension.
2Ouvrez le Marine Pack. (K-2)
Appuyez en même temps sur les touches OPEN supérieure et inférieure 1 pour
libérer le fermoir dans le sens de la flèche 2 et ouvrir le coffret du Marine Pack.
3 Retirez l'appareil photo numérique hors du Marine Pack.
Lorsque l'appareil photo numérique a fonctionné pendant longtemps, il est
relativement chaud. Mettez l'appareil photo hors tension et laissez-le se refroidir
pendant un certain temps avant de le retirer du Marine Pack.
Veillez à ne pas faire tomber l'appareil en le retirant.
Remarque
Avant d'ouvrir le Marine Pack, rincez-le avec de l'eau du robinet ou de
l'eau douce, puis essuyez-le complètement avec un chiffon doux. Lorsque
vous l'ouvrez, veillez à ne pas le mouiller avec l'eau de votre combinaison
de plongée, de vos cheveux ou de votre corps.
Avant de partir en plongée
· Avant de partir faire de la photographie sous-marine, immergez le Marine
Pack à 1 mètre (3,3 pieds) sous l'eau environ et assurez-vous qu'il
fonctionne correctement et que de l'eau ne s'infiltre pas à l'intérieur.
· Installez l'appareil photo numérique dans le Marine Pack avant la plongée
et, autant que possible, évitez de l'ouvrir et de le fermer à bord d'un
bateau ou sur la plage. Installez l'appareil dans le Marine Pack dans un
endroit aussi peu humide que possible.
· Avant d'utiliser le Marine Pack, assurez-vous qu'il n'y a pas de saletés
coincées entre les moitiés avant et arrière du boîtier.
· Sur des images prises sous l'eau, le sujet présente parfois une dominante
bleuâtre. Pour corriger ce phénomène, utilisez le kit de filtre couleur
VF-MP5K* (en option), disponible comme accessoire en option.
* Le diffuseur fourni avec le VF-MP5K n'est pas disponible lorsque le
caisson marin est utilisé.
Meilleur moment de la journée pour la prise
de vues
Le meilleur moment de la journée pour la prise de vues est entre 10 h et
14 h, lorsque le soleil est à la verticale.
Pour photographier dans des endroits mal éclairés par le soleil ou la nuit,
utilisez la torche de plongée sous-marine HVL-ML20M (en option).
En cas de problème
Symptôme
Présence de gouttes d'eau à
l'intérieur du Marine Pack.
Les fonctions
d'enregistrement et de lecture
n' agissent pas.
Cause/Remèdes
· Le joint torique est entaillé ou fendillé.
b Remplacez le joint torique par un neuf.
·Le joint torique n'est pas correctement en
place.
b Placez le joint torique uniformément dans
la gorge.
·Les fermoirs sont mal verrouillés.
b Verrouillez correctement les fermoirs.
· La batterie est déchargée.
b Rechargez complètement la batterie.
· Le « Memory Stick » est plein.
b Insérez un autre « Memory Stick » ou
effacez les données inutiles du « Memory
Stick ».
·Le taquet d'interdiction en écriture du
« Memory Stick » est sur LOCK.
b Placez le taquet sur la position
d'enregistrement ou insérez un « Memory
Stick » neuf.
Spécifications
Matière
Plastique (PC, ABS), acier inoxydable, verre
Étanchéité à l'eau
Joint torique, fermoir
Résistance à la pression
Jusqu'à une profondeur de 40 m (132 pieds) sous l'eau
Commutateurs pouvant être commandés de l'extérieur
Alimentation, Mode, Déclencheur, Zoom, Flash, Macro, Commande,
Retardateur, Revue, Menu, Taille de l'image/Suppression, Etat LCD/Marche/
Arrêt LCD
Dimensions
148
× 95 × 87 mm (5 7/8 × 3 3/4 × 3 1/2 po.) (l/h/p) environ
(parties saillantes et commandes non comprises)
Poids
410 g (14,5 on.) environ (Marine Pack seulement)
Articles inclus
Marine Pack (1)
Courroie de mein (1)
Graisse (1)
Joint torique (1)
Entretoise (1)
Jeu de documents imprimés
Accessoires en option
Kit de filtre VF-MP5K
Kit de bras VCT-MP1K
Torche de plongée HVL-ML20M (doit être utilisée avec le kit de bras
VCT-MP1K et la batterie « InfoLITHIUM » (série M), (le chargeur de batterie
série M))
La conception et les caractéristiques sont susceptibles d'être modifiées sans
préavis.
Drip-proof packing
Garniture pare-gouttes
(Self-timer)/Control button
(Retardateur)/Touche de
commande
(Image Size/
Delete) button
Touche
(Taille
de I'image/Suppression)


background image
T
W
Español
Nederlands
Voorbereiding
Voorbereiden van de digitale fotocamera
Installeer de digitale fotocamera in het onderwaterhuis in een ruimte met
weinig vocht in de lucht. Als het onderwaterhuis geopend of gesloten wordt
op een erg warme of vochtige plaats, kan het glas aan de voorkant beslaan.
Zie voor nadere bijzonderheden de gebruiksaanwijzing van de digitale
fotoocamera.
1 Verwijder de polsband van de digitale fotocamera.
2 Plaats de batterij.
Zorg dat u altijd gebruik maakt van een volledig opgeladen batterij.
3 Plaats de "Memory Stick".
4 Schakel de digitale fotocamera in.
5Schakel het LCD-scherm in ("ON").
6 Zet alle instelfuncties van uw digitale fotocamera in de
automatische stand.
7 Schakel de autofocus-lichtbron van uw digitale fotocamera in
de "OFF" stand.
De autofocus-lichtbron werkt dan niet meer.
8 Controleer de lens en het LCD scherm van uw digitale
fotocamera op stof of vuil.
E Installeren van de digitale fotocamera
1 Schakel eerst de digitale fotocamera uit.
2 Zet de functiekeuzeknop van de digitale fotocamera op "
".
(E-1)
3 Open het onderwater-camerahuis. (E-2)
Druk de bovenste en onderste OPEN toetsen tegelijk in 1 en open de sluitklem in
de richting van de pijl 2 om het onderwater-camerahuis te openen.
Opmerking
Pas op dat u het afstandsstuk niet verliest, want dit zult u weer nodig hebben bij
het opbergen van het onderwater-camerahuis.
4 Tref de nodige voorbereidingen aan het onderwater-
camerahuis.
Lees ook de afzonderlijke O-ring onderhoudshandleiding.
Die aparte handleiding bevat gedetailleerde aanwijzingen voor het
behandelen van de belangrijke O-ring.
1
Verwijder de O-ring.
2
Vet de O-ring licht in met smeervet.
Verwijder echter eerst alle stof, vuil of zand van de O-ring, de pakkinggroef en
de pakkingrand van het onderwaterhuis waar de O-ring tegenaan sluit. Vet de
O-ring daarna in met een gelijkmatig dun laagje smeervet.
3
Inspecteer de druppelbestendige pakking zorgvuldig op stof, vuil of
zandkorrels.
4
Breng de O-ring aan op het onderwaterhuis.
Opmerkingen
· Verwijder de druppelbestendige pakking niet en vet deze niet in met
smeervet.
· Als er stof, vuil of zandkorrels op de O-ring of de druppelbestendige pakking
zijn wanneer u het onderwaterhuis sluit, kan dat schade of waterlekkage
veroorzaken.
5 Installeer de digitale fotocamera in het onderwaterhuis. (E-3)
Zet voor het aanbrengen of verwijderen van de digitale fotocamera die
altijd eerst uit. Met de camera ingeschakeld zou de lens beschadigd
kunnen worden.
Controleer of de digitale fotocamera stevig op zijn plaats zit.
6 Sluit de helften van het onderwaterhuis en maak de sluitklem
vast. (E-4)
Zorg dat de helften precies op elkaar aansluiten en druk de sluitklem aan totdat
die vastklikt aan de bovenkant en aan de knoppenkant.
Juiste stand voor het dichtdoen van de sluitklem
Juiste stand (Zie afb. E-4 1)
Verkeerde stand (Zie afb. E-4 2)
Als u de sluitklem probeert te sluiten in de verkeerde stand van
voorbeeld E-4 2, kan de klem blokkeren en zult u het onderwaterhuis
niet goed kunnen sluiten.
Opmerking
Bij het sluiten van de onderwaterbehuizing dient u er zeker van te zijn dat er op
de O-ring en in de pakkinggroef geen vuil, zand, haren of andere deeltjes meer
aanwezig zijn die daar niet thuishoren. Als er verontreinigingen op de genoemde
plaatsen blijven zitten, kan er waterlekkage optreden.
F Vastmaken van de polsband
Het is aanbevolen om voor het gebruik van het onderwaterhuis de
(bijgeleverde) polsband vast te maken. (Zie afb. F)
Opmerking
Let op dat de polsband bij het openen of sluiten van het onderwaterhuis
niet tussen de randen klem raakt. Anders zou er water binnen kunnen
lekken.
Gebruik van de onderwaterbehuizing
G Opnemen
1 Schakel de stroom in. (G-1)
Controleer of de functiekeuzeknop naar behoren werkt.
Door aan de functiekeuzeknop te draaien, kiest u de functies als volgt:
Bijzonderheden over de verschillende functies kunt u aflezen op het LCD scherm.
2 Zet de functiekeuzeknop in de gewenste stand en druk de
sluitertoets in. (G-2, 3)
Tijdens het opnemen ziet u de opgenomen scènes op het LCD scherm.
Voor het fotograferen, of opnemen van stilstaande beelden, draait u de
functiekeuzeknop van de digitale fotocamera in de "
", "
" of "
" stand.
Voor het filmen, of opnemen van bewegende beelden, draait u de
functiekeuzeknop van de digitale fotocamera in de "
" stand.
Tijdens het opnemen van bewegende beelden wordt er geen geluid opgenomen.
Voor het maken van opnamen onder allerlei omstandigheden zet u de
functiekeuzeknop van de digitale fotocamera in de "
", "
", "
", "
", "
",
"
" of "
" stand en dan kiest u de gewenste opnamefunctie.
Nadere bijzonderheden vindt u in de gebruiksaanwijzing die bij de digitale
fotocamera is meegeleverd.
Opmerkingen
Draai niet te veel aan de functiekeuzeknop van de digitale fotocamera in
het onderwaterhuis. Dat zou tot storingen kunnen leiden.
Aangezien de brekingsindex onderwater hoger is dan boven water, zullen
voorwerpen onderwater ongeveer 1/4 dichterbij lijken. Als u van tevoren
op een vaste afstand scherpstelt, zult u bij opnemen onderwater er rekening
mee moeten houden dat de afstand daar navenant van afwijkt.
H Toetsen voor de diverse camerafuncties/instellingen
Met deze toetsen kunt u de diverse functies van de digitale fotocamera in
het onderwater-camerahuis bedienen.
I Gebruik van de zoom
Druk op de zoomknop.
1
Druk op de W-kant voor groothoek-opnamen (onderwerp lijkt verder
weg).
2
Druk op de T-kant voor tele-opnamen (onderwerp lijkt dichterbij).
Opmerkingen
·U kunt bij het opnemen de beelden niet in de zoeker zien.
· Als u de digitale fotocamera een tijdlang ingeschakeld laat zonder het
toestel te bedienen, zal deze automatisch uitschakelen om te voorkomen
dat de batterij uitgeput raakt. Om de digitale fotocamera weer te
gebruiken, schakelt u de stroom weer in. Zie voor nadere bijzonderheden
tevens de gebruiksaanwijzing van de digitale fotocamera.
J Weergave met de regelknop
U kunt beelden weergeven op het LCD-scherm door gebruikmaking van de
regelknop. Er is dan echter geen geluid te horen.
1 Schakel de stroom in. (J-1)
2 Zet de functiekeuzeknop in de "
" weergavestand. (J-2)
3 Kies het gewenste beeld met de regelknop. (J-3)
J-3 1 Voorgaande beeld
J-3 2 Volgende beeld
Nadere bijzonderheden vindt u in de gebruiksaanwijzing die bij de digitale
fotocamera is meegeleverd.
Característica principal
Utilizable bajo agua a una profundidad de hasta 40 metros.
·Este portacámara subacuático MPK-WA es exclusivamente para utilizarse
con la cámara digital DSC-W7/W5/W17/W15/W1 Sony. (Cyber-shot
para portacámara subacuático no está disponible en todos los países.)
·Este portacámara subacuático es resistente al agua, y permite utilizar la
cámara digital en la lluvia, la nieve, o en la playa.
Una junta tórica floja, pillada, con arena o sucia puede causar la
infiltración de agua.
Compruebe la junta tórica antes de utilizarla. Con respecto a los
detalles, lea el manual de mantenimiento de la junta tórica.
Aviso
·Antes de utilizar la cámara digital bajo el agua, sumerja primero el
portacámara subacuático a una profundidad de aproximadamente
1 metro y compruebe que la cámara digital funciona debidamente y que el
portacámara subacuático no tiene fugas, y a continuación comience su
buceo.
·En el caso improbable de que un mal funcionamiento del portacámara
subacuático ocasione daños debidos a una fuga de agua, Sony no se
responsabilizará de los daños al equipo alojado en él (cámara digital,
batería, etc.) ni del contenido grabado, ni tampoco de los gastos
relacionados con la fotografía.
Precauciones
·Cuando utilice este portacámara subacuático cuando bucee, preste
atención a la situación de los alrededores. La falta de atención podría
provocar un accidente durante el buceo.
·En caso de producirse infiltración de agua, preste atención a la situación
de los alrededores y emerja de acuerdo con las normas de seguridad para
buceo.
·No someta el cristal frontal a golpes fuertes porque podrá agrietarse.
·Evite abrir el portacámara subacuático en la playa o en el agua. Los
preparativos tales como la instalación de la cámara digital y el cambio del
"Memory Stick" deberán realizarse en un lugar de poca humedad y sin
aire salino.
·No arroje el portacámara subacuático al agua.
·Evite utilizar el portacámara subacuático en lugares de fuertes olas.
·Evite utilizar el portacámara subacuático en las situaciones siguientes:
­ en un lugar muy cálido o húmedo.
­ en agua más caliente de 40°C.
­ a temperaturas inferiores a 0°C.
En estas situaciones podrá producirse condensación de humedad o fugas
de agua y dañarse el equipo.
·No utilice el portacámara subacuático durante más de 30 minutos por vez
en temperaturas superiores a los 35°C.
·No deje el portacámara subacuático bajo la luz solar directa en un lugar
muy cálido y húmedo durante largo tiempo. Si no puede evitar dejarlo
bajo la luz solar directa, asegúrese de cubrirlo con una toalla u otra
protección.
·La cámara digital se calentará si se utiliza dentro del portacámara
subacuático durante mucho tiempo. Antes de extraer la cámara digital del
portacámara subacuático, deje éste a la sombra o en otro lugar fresco
durante cierto tiempo para que se enfríe.
·Si el protector frontal se desprende, vuelva a colocarlo presionándolo
firmemente en el sentido de la flecha. (Consulte la ilustración A)
Si hay aceite bronceador en el portacámara subacuático, lávelo
completamente utilizando agua tibia. Si dejase el portacámara
subacuático con aceite bronceador en su cuerpo, la superficie del
mismo podría decolorar o dañarse. (como rajas en la superficie.)
Infiltración de agua
En caso producirse una infiltración de agua al interior, deje de exponer el
portacámara subacuático al agua inmediatamente.
Si se moja la cámara digital, llévela inmediatamente al distribuidor Sony
más cercano. Los costes de reparación tendrá que abonarlos el usuario.
Efecto antiempañante
El cristal frontal del portacámara subacuático tiene un tratamiento contra el
empañamiento, pero tendrá que instalar la cámara en una sala con bajo
nivel de humedad o en un entorno similar.
Junta tórica
Este equipo utiliza una junta tórica para mantener su resistencia al agua.
Con respecto a los detalles, consulte el Manual de mantenimiento de la
junta tórica separado.
El manejo inadecuado de la junta tórica podría resultar en la infiltración de
agua.
Empaquetadura impermeable
No quite ni aplique grasa a la empaquetadura contra la infiltración de gotas
de agua. Si la empaquetara se levantase o pillase, podría infiltrarse agua.
Si la empaquetadura impermeable se desprende, vuelva a colocarla
cuidadosamente de forma que no quede retorcida. (Consulte la ilustración
B)
Duración útil de la junta tórica y de la empaquetadura
impermeable
Junta tórica
La duración útil de la junta tórica variará con la frecuencia de utilización del
portacámara subacuático y las condiciones. En general, será de
aproximadamente un año.
Empaquetadura impermeable
Reemplace la empaquetadura impermeable por otra nueva cuando
encuentre rayas o rajas en ella.
Después del reemplazo, compruebe que no haya infiltración de agua.
Grasa
Utilice la grasa del tubo azul (suministrado). La utilización de la grasa del
tubo amarillo o de otros fabricantes podría dañar la junta tórica y causar la
infiltración de agua.
Junta tórica, empaquetadura impermeable, y grasa
Usted podrá adquirir juntas tórica, empaquetadura impermeable, y grasa
para objetivos en el proveedor Sony más cercano.
Junta tórica (modelo núm. 3-071-364-01)
Empaquetadura impermeable (modelo núm. 3-080-066-01)
Grasa (modelo núm. 3-071-370-01)
Mantenimiento
Después de grabar
·Después de grabar en un lugar expuesto a brisas marinas, lave el
portacámara subacuático con agua dulce para retirar la sal y la arena con
las hebillas perfectamente abrochadas, y a continuación frote con un paño
suave y seco. Se recomienda sumergir el portacámara subacuático en agua
dulce durante unos 30 minutos. Si se deja sal en él, podrán dañarse las
partes metálicas o formarse óxido y ocasionar fugas de agua.
·Si hay aceite bronceador en el portacámara subacuático, lávelo
completamente utilizando agua tibia.
·Limpie el interior del portacámara subacuático con un paño suave y seco.
No lave el interior del portacámara subacuático.
Cerciórese de realizar el mantenimiento indicado cada vez que lo utilice. No
use ningún disolvente, como alcohol, bencina, ni diluidor de pintura para la
limpieza, ya que podría dañar el acabado de la superficie del mismo.
Cuando guarde el portacámara subacuático
·Ponga el espaciador suministrado con el portacámara subacuático para
evitar el desgaste de la junta tórica. (Consulte la ilustración C)
·Evite que se acumule polvo en la junta tórica.
·Recubra ligeramente la junta tórica con grasa e insértela en la ranura de
asiento, luego guarde el portacámara subacuático en un lugar fresco y
bien ventilado. No abroche la hebilla.
·Evite guardar el portacámara subacuático en un lugar muy cálido o
húmedo, o junto con naftalina o alcanfor, ya que en estas condiciones se
puede dañar el portacámara subacuático.
Preparación
Preparación de la cámara digital
Instale la cámara digital en una sala o un entorno similar con baja humedad.
Si abriese el portacámara subacuático en un lugar cálido o húmedo, se podría
empañar el cristal frontal.
Con respecto a los detalles, consulte el Manual de instrucciones
suministrado con la cámara digital.
1 Retire la correa de muñeca de la cámara digital.
2 Inserte la batería.
Asegúrese de utilizar una batería completamente cargada.
3 Inserte el "Memory Stick".
4 Conecte la alimentación de la cámara digital.
5 Ponga la pantalla LCD en "ON".
6 Ponga cada uno de los ajustes de la cámara digital en el modo
automático.
7 Ponga el iluminador de enfoque automático (AF) de la cámara
digital en "OFF".
Esto inhabilitará la utilización del iluminador AF.
8 Compruebe si en el objetivo de la cámara digital o en la pantalla
LCD hay suciedad.
E Instalación de la cámara digital en el
interior del portacámara subacuático
1 Desconecte la alimentación de la cámara digital.
2 Ponga el selector de modo de la cámara digital en "
". (E-1)
3Abra el portacámara digital. (E-2)
Presione simultáneamente los botones OPEN superior e inferior 1 y suelte la
hebilla en el sentido de la flecha 2 para abrir el cuerpo del portacámara
subacuático.
Nota
Tenga cuidado de no perder el separador, porque lo necesitará para guardar el
portacámara subacuático.
4 Prepare el portacámara subacuático.
Cerciórese de leer el Manual de mantenimiento de la junta tórica.
Los detalles importantes relacionados con la junta tórica se describen en
este manual.
1
Retire la junta tórica.
2
Recubra la junta tórica con grasa.
Limpie la arena o la suciedad de la junta tórica, de la ranura de asentamiento, o
del cuerpo del portacámara subacuático donde toque dicha junta. Recubra la
junta tórica con una capa ligera y uniforme de grasa.
3
Compruebe que en la empaquetadura impermeable no haya arena ni suciedad.
4
Fije la junta tórica en el portacámara subacuático.
Notas
· No retire la empaquetadura impermeable ni la engrase.
· El cuerpo del portacámara subacuático puede rallarse o puede producirse
infiltración de agua si cierra la cubierta con arena o suciedad en la junta tórica
de la empaquetadura impermeable.
5 Instale la cámara digital en el interior del portacámara
subacuático. (E-3)
Antes de instalar o extraer la cámara digital, desconecte su alimentación. Si
dejase la alimentación conectada, el objetivo podría dañarse.
Compruebe si la cámara digital está correctamente instalada.
6 Cierre el cuerpo del portacámara subacuático y abroche la
hebilla. (E-4)
Asegure el cuerpo del portacámara subacuático, y después abroche la hebilla hasta
que chasquee en la parte superior y en la inferior.
Posición de la hebilla cuando cierre el cuerpo del
portacámara subacuático
Buen ejemplo (Consulte la ilustración E-4 1)
Mal ejemplo (Consulte la ilustración E-4 2)
Si cierra la hebilla como se muestra en E-4 2, se pillará imposibilitando
el cierre del portacámara deportivo.
Nota
Cuando cierre el cuerpo del portacámara subacuático, asegúrese de que no haya
residuos, arena, cabellos, ni ninguna otra materia extraña en la junta tórica o en
la ranura de asiento. Si hay alguna de tales materias extrañas en estos lugares
podrá producirse una fuga de agua.
F Fijación de la correa de muñeca
Le recomendamos fijar la correa de muñeca (suministrada) antes de utilizar
el portacámara subacuático. (Consulte la ilustración F)
Nota
Tenga cuidado de no pillar la correa para la muñeca cuando abra y cierre el
cuerpo del portacámara subacuático. De lo contrario, podría infiltrarse
agua.
Utilización del portacámara
subacuático
G Grabación
1 Conecte la alimentación. (G-1)
Compruebe si el selector de modo funciona normalmente.
El modo cambiará en el orden siguiente cuando gire el selector de
modo:
Con respecto a los detalles, compruebe en la pantalla LCD.
2 Ponga el selector de modo en el modo deseado y presione el
botón del disparador. (G-2, 3)
Usted podrá grabar imágenes observando la pantalla LCD.
Para grabar imágenes fijas, ponga el selector de modo de la cámara digital en
"
", "
" o "
".
Para grabar imágenes móviles, ponga el selector de modo de la cámara digital en
"
".
Durante la grabación de imágenes móviles no podrá grabarse sonido.
Para grabar imágenes en varias escenas, ponga el selector de modo de la cámara
digital en "
", "
", "
", "
", "
", "
" o "
", y seleccione el modo
deseado.
Para más detalles, consulte el manual de instrucciones suministrado con la cámara
digital.
Nota
No gire excesivamente el selector de modo de la cámara digital cuando esté
insertada en el portacámara subacuático. Esto podría causar problemas.
Como el índice de refracción bajo el agua es más alto que en el aire, los
motivos aparecerán 1/4 más cercanos. Por lo tanto, cuando videofilme bajo
el agua con el enfoque preajustado, la distancia hasta el motivo que haya
ajustado y la real serán diferentes.
H Utilización/Ajuste de diversas funciones
Usted podrá utilizar varias funciones de la cámara digital instalada en el
portacámara subacuático.
I Utilización del zoom
Pulse el botón del zoom.
1
Pulse el lado W para gran angular. (El motivo aparecerá más alejado.)
2
Pulse el lado T para telefoto. (El motivo aparecerá más cerca.)
Notas
·Usted no podrá grabar imágenes cuando observe a través del visor.
·Si no utiliza la cámara digital con la alimentación conectada durante cierto
tiempo, la alimentaciópn de la misma se desconectará automáticamente
para evitar que se descargue la batería. Para volver a utilizar la cámara
digital, vuelva a conectar su alimentación. Con respecto a los detalles,
consulte el manual de instrucciones suministrado con la cámara digital.
J Reproducción con el mando de control
Puede reproducir imágenes en la pantalla LCD utilizando el mando de
control. No podrá oír el sonido.
1 Conecte la alimentación. (J-1)
2 Ponga el control de modo en "
". (J-2)
3 Seleccione la imagen deseada con el mando de control. (J-3)
J-3 1 A la imagen anterior
J-3 2 A la imagen siguiente
Para más detalles, consulte el manual de instrucciones suministrado con la cámara
digital.
K Extracción de la cámara digital
1 Desconecte la alimentación. (K-1)
Antes de instalar o extraer la cámara digital, desconecte su alimentación. Si
dejase la alimentación conectada, el objetivo podría dañarse.
2Abra el portacámara digital. (K-2)
Presione simultáneamente los botones OPEN superior e inferior 1 y suelte la
hebilla en el sentido de la flecha 2 para abrir el cuerpo del portacámara
subacuático.
3 Extraiga la cámara digital del portacámara subacuático.
Cuando haya utilizado la cámara digital durante mucho tiempo, se calentará.
Desconecte la alimentación de la cámara digital, y deje que se enfríe durante cierto
tiempo antes de extraerla del portacámara subacuático.
Tenga cuidado de no dejar caer la cámara digital cuando la extraiga.
Nota
Antes de abrir el portacámara subacuático, aclárelo con agua del grifo o con
agua dulce y luego frótelo con un paño suave y seco. Cuando lo abra, tenga
cuidado de no dejar que chorree agua de su cuerpo, cabello o traje de agua
en la cámara digital.
Antes de bucear
·Antes de grabar imágenes bajo el agua, sumerja primero el portacámara
subacuático a una profundidad de aproximadamente 1 metro y
compruebe que funciona debidamente y que no haya fugas, y a
continuación comience su buceo.
·Instale la cámara digital en el portacámara subacuático antes de bucear, y
evite, en lo posible, abrir y cerrarlo cuando esté en una embarcación o en
la costa del mar. Cuando instale la cámara digital, hágalo en un lugar
donde haya la menor humedad posible.
·Antes de utilizar le portacámara subacuático, cerciórese de que no hayan
residuos pillados entre las mitades delantera y trasera del cuerpo del
portacámara subacuático.
·En las imágenes grabadas bajo el agua, el motivo tendrá a veces un tono
azulado. Cuando suceda esto, para corregir el color, utilice un juego de
filtros de color VF­MP5K* (opcional).
* El difusor suministrado con la VF -MP5K no podrá utilizarse cuando se
use el portacámara subacuático.
Horas apropiadas para grabar
La hora más apropiada para grabar imágenes es entre las 10:00 AM y las
2:00 PM, cuando el sol se encuentra directamente encima.
Para grabar imágenes en lugares en los que no llegue bien la luz solar, o por
la noche, utilice una lámpara para vídeo subacuática HVL­ML20M
(opcional).
Solución de problemas
Síntoma
Hay gotas de agua dentro del
portacámara subacuático.
Las funciones de grabación
no trabajan.
Especificaciones
Material
Plástico (PC, ABS), acero inoxidable, cristal
Estanqueidad
Junta tórica, hebilla
Resistencia a la presión
Hasta una profundidad de 40 metros bajo el agua
Interruptores que se pueden accionar externamente
Alimentación, Modo, Disparador, Zoom, Flash, Macro, Control,
Autodisparador, Revisión, Menú, Tamaño de Imagen/Borrado, Estado de la
pantalla LCD/encendido/apagado de la pantalla LCD
Dimensiones
Aprox. 148
× 95 × 87 mm (An/Al/Prf)
(excluyendo partes y controles salientes)
Peso
Aprox. 410 g (portacámara subacuático solamente)
Elementos incluidos
Portacámara subacuático (1)
Correa de muñeca (1)
Grasa (1)
Junta tórica (1)
Espaciador (1)
Juego de documentación impresa
Accesorios opcionales
Juego de filtros VF-MP5K
Juego de brazo VCT-MP1K
Lámpara para vídeo subacuática HVL-ML20M (tendrá que utilizarse junto con
el juego de brazo VCT-MP1K y la batería "InfoLITHIUM" (serie M), (cargador
de baterías de la serie M))
El diseño y las especificaciones están sujetos a cambio sin previo aviso.
Belangrijkste kenmerk
Te gebruiken tot op een diepte van wel 40 meter onder water.
·Dit onderwater-camerahuis MPK-WA is uitsluitend bestmd voor gebruik
met de digitale fotocamera DSC-W7/W5/W17/W15/W1 van Sony. (De
Cyber-shot camera die in dit onderwater-camerahuis past, is niet in alle
landen verkrijgbaar.)
·Dit onderwater-camerahuis is waterbestendig, zodat u de digitale
fotocamera hiermee ook kunt gebruiken bij regen, sneeuw of aan het
strand.
Een O-ring die los zit, beschadigd of vuil is door stof of zand zou
onder water lekkage kunnen veroorzaken.
Controleer voor het gebruik altijd zorgvuldig de O-ring.
Zie voor nadere bijzonderheden de O-ring onderhoudshandleiding.
Opmerking
·Alvorens u de digitale fotocamera onder water gaat gebruiken, dient u de
onderwaterbehuizing eerst tot op een diepte van circa 1 meter te brengen
en te controleren of de digitale fotocamera naar behoren werkt en de
onderwaterbehuizing niet lekt. Daarna kunt u beginnen met duiken.
·Indien er door een defect van de onderwaterbehuizing als gevolg van
waterlekkage schade ontstaat, hetgeen overigens zeer onwaarschijnlijk is,
aanvaardt Sony geen aansprakelijkheid voor eventuele beschadiging van
de daarin aanwezige apparatuur (digitale fotocamera, batterij, enz.) en de
gemaakte opnamen, en evenmin voor de kosten die verbonden zijn aan
het fotograferen.
Voorzorgsmaatregelen
·Bij gebruik van dit onderwater-camerahuis tijdens het duiken dient u
altijd goed op te letten wat er om u heen gebeurt. Onoplettendheid tijdens
het duiken kan bijzonder gevaarlijk zijn.
·Ook als u merkt dat er water in het camerahuis binnenlekt, mag u niet uw
directe omgeving uit het oog verliezen, maar dient u voorzichtig op te
stijgen naar het oppervlak, volgens de regels voor veilig duiken.
·Stel het glas aan de voorkant niet bloot aan krachtige schokken, aangezien
het hierdoor kan gaan barsten.
·Open de onderwaterbehuizing niet op het strand of op het water. De
voorbereidingen, zoals het installeren van de digitale fotocamera en het
verwisselen van de "Memory Stick", dienen te geschieden op een plaats
met een lage vochtigheid en zonder zoute lucht.
·Gooi de onderwaterbehuizing niet in het water.
·Gebruik de onderwaterbehuizing niet op plaatsen met een sterke golfslag.
·Gebruik de onderwaterbehuizing niet onder de volgende
omstandigheden:
­ op een zeer warme of vochtige plaats
­ in water met een temperatuur boven 40°C
­ bij temperaturen beneden 0°C
Onder bovengenoemde omstandigheden kan er condensvorming of
waterlekkage optreden waardoor de apparatuur beschadigd kan raken.
·Bij temperaturen boven 35°C mag u de onderwaterbehuizing niet langer
dan 30 minuten achtereen gebruiken.
·Laat de onderwaterbehuizing niet achter op een zeer warme en vochtige
plaats waar deze langdurig is blootgesteld aan direct zonlicht. Indien u de
onderwaterbehuizing beslist moet achterlaten op een plaats met direct
zonlicht, dient u de behuizing altijd te bedekken met een handdoek of
andere bescherming.
·De digitale fotocamera kan na langdurig gebruik in het onderwaterhuis
nogal warm worden. Alvorens u de digitale fotocamera uit het
onderwaterhuis verwijdert, dient u eerst het onderwaterhuis met de
camera er in een tijdje in de schaduw te leggen of op een andere koele
plaats, om de camera te laten afkoelen.
·Als de voorglas-beschermring los raakt, maakt u hem weer vast door de
ring stevig aan te drukken in de richting van de pijl. (Zie afb. A)
Als er zonnebrandolie op het onderwaterhuis is gekomen, wast u het
dan grondig af met lauwwarm water. Resten zonnebrandolie op het
onderwaterhuis kunnen de afwerking van het camerahuis aantasten of
doen verkleuren. (en er zouden barstjes in het oppervlak kunnen
ontstaan.)
Waterlekkage
Indien er toevallig water naar binnen is gelekt, zorg dan onmiddellijk dat
de onderwaterbehuizing niet langer aan water wordt blootgesteld.
Indien de digitale fotocamera nat is geworden, dient u deze onmiddellijk
naar de dichtstbijzijnde Sony-handelaar te brengen. De kosten van de
reparatie worden de klant in rekening gebracht.
Ontwasemend effect
Het voorglas van het onderwaterhuis heeft een ontwasemend effect, maar
toch dient u de digitale fotocamera in het onderwaterhuis te installeren in
een niet al te vochtige omgeving.
O-ring
Dit apparaat is voorzien van een waterdichte pakking met een O-ring. Zie
voor nadere aanwijzingen de aparte gebruiksaanwijzing van de O-ring.
Als de O-ring niet juist wordt behandeld, kan er water in het apparaat
binnenlekken.
Druppelbestendige pakking
Probeer niet de druppelbestendige pakking te verwijderen of in te vetten.
De druppelbestendige pakking kan daardoor gaan uitsteken en tussen de
helften van het onderwaterhuis klem raken.
Als de druppelbestendige pakking los raakt, brengt u die zorgvuldig weer
aan zonder hem te verwringen. (Zie afb. B)
Levensduur van de O-ring en druppelbestendige pakking
O-ring
De gebruiksduur van de O-ring hangt af van hoe intensief en onder welke
omstandigheden het onderwaterhuis wordt gebruikt. Gemiddeld zal een O-
ring ongeveer een jaar meegaan.
Druppelbestendige pakking
Vervang de druppelbestendige pakking door een nieuwe zodra u er krasjes
of barstjes op aantreft.
Na vervanging dient u het onderwaterhuis weer even op lekkage te
controleren.
Smeervet
Gebruik het (bijgeleverde) smeervet in de blauwe tube. Andere soorten vet,
uit een gele tube of van een ander merk, kunnen de O-ring beschadigen en
leiden tot waterlekkage.
Reserve O-ringen, druppelbestendige pakkingen en
smeervet
Reserve O-ringen, druppelbestendige pakkingen en smeervet zijn
verkrijgbaar bij de dichtstbijzijnde Sony leverancier.
O-ring (bestelnummer 3-071-364-01)
Druppelbestendige pakking (bestelnummer 3-080-066-01)
Smeervet (bestelnummer 3-071-370-01)
Onderhoud
Na het opnemen
·Na het maken van opnamen op een plaats met harde zeewind dient u de
onderwaterbehuizing ­ met de gespen stevig vast ­ met zoet water te
wassen om zout en zand te verwijderen. Veeg na met een zachte droge
doek. Het is aan te bevelen om de onderwaterbehuizing gedurende circa
30 minuten ondergedompeld te laten in zoet water. Indien er zout op blijft
zitten, bestaat de kans dat de metalen onderdelen beschadigd raken of
gaan roesten en waterlekkage veroorzaken.
·Als er zonnebrandolie op het onderwaterhuis is gekomen, wast u het dan
grondig af met lauwwarm water.
·Veeg de binnenkant van het onderwaterhuis schoon met een zachte droge
doek. Was het van binnen niet met water.
Verricht het bovenstaande onderhoud iedere keer dat u het onderwater-
camerahuis gebruikt. Gebruik voor het schoonmaken geen oplosmiddelen
zoals thinner, benzeen, alcohol en dergelijke, want deze middelen kunnen
de afwerking van het onderwater-camerahuis aantasten.
Opbergen van de onderwaterbehuizing
·Bevestig het met de onderwaterbehuizing meegeleverde afstandsstuk om
slijtage van de O-ring te voorkomen. (Zie afb. C)
·Zorg dat er zich geen stof op de O-ring kan ophopen.
·Breng een dun laagje vet aan op de O-ring en plaats deze in de
pakkinggroef. Berg de onderwaterbehuizing vervolgens op een koele,
goed geventileerde plaats op. Maak de sluitklem niet vast.
·De onderwaterbehuizing mag niet worden opgeborgen op een koude of
zeer warme of vochtige plaats, en ook niet samen met naftaleen of kamfer,
aangezien de onderwaterbehuizing hierdoor beschadigd kan raken.
K Verwijderen van de digitale fotocamera
1Schakel de stroom uit. (K-1)
Zet voor het aanbrengen of verwijderen van de digitale fotocamera die
altijd eerst uit. Met de camera ingeschakeld zou de lens beschadigd
kunnen worden.
2Open het onderwater-camerahuis. (K-2)
Druk de bovenste en onderste OPEN toetsen tegelijk in 1 en open de sluitklem in
de richting van de pijl 2 om het onderwater-camerahuis te openen.
3Verwijder de digitale fotocamera uit het onderwaterhuis.
De digitale fotocamera kan na langdurig gebruik in het onderwaterhuis nogal
warm worden. Alvorens de digitale fotocamera uit het onderwaterhuis te
verwijderen, schakelt u de stroom uit en laat u het apparaat eerst een tijdje liggen
om af te koelen.
Pas op dat u de digitale fotocamera niet laat vallen wanneer u deze
verwijdert.
Opmerking
Alvorens u de onderwaterbehuizing opent, dient u deze af te spoelen met
leidingwater of zoet water. Veeg het water er vervolgens af met een zachte
doek. Wanneer u de onderwaterbehuizing opent, dient u erop te letten dat
er geen waterdruppels van uw lichaam, haar of duikpak op de digitale
fotocamera terechtkomen.
Alvorens u gaat duiken
·Alvorens u beelden onder water gaat opnemen, dient u de
onderwaterbehuizing eerst tot op een diepte van circa 1 meter te brengen
en te controleren of deze niet lekt. Daarna kunt u beginnen met duiken.
·Installeer de digitale fotocamera geruime tijd voor het duiken in het
onderwater-camerahuis en zorg dat het onderwaterhuis op zee of aan de
waterkant zo min mogelijk geopend wordt. Kies voor het aanbrengen van
de digitale fotocamera in het onderwater-camerahuis een plaats met zo
weinig mogelijk vocht.
·Controleer voor elk gebruik van het onderwater-camerahuis nog even of
er niets, ook geen haartje, klem is geraakt tussen de voorste en de
achterste helft van het onderwaterhuis.
·Veel onderwater-opnamen worden ontsierd door een blauwe zweem die
over alles ligt. Dit kunt u voorkomen door gebruik te maken van de (los
verkrijgbare) VF-MP5K* kleurenfilterset, die als optionele accessoire bij
het onderwaterhuis leverbaar is.
* De diffusor die is inbegrepen bij de VF-MP5K is niet te gebruiken in
het onderwaterhuis.
Geschikte tijden voor opnemen
De beste tijd voor het opnemen onder water is tussen 10:00 uur 's ochtends
en 2:00 uur 's middags, wanneer de zon hoog aan de hemel staat.
Voor heldere opnamen bij nacht of op plaatsen waar geen zonlicht
doordringt, kunt u gebruik maken van de HVL-ML20M onderwater-
videolamp (los verkrijgbaar).
Verhelpen van storingen
Probleem
Er zitten druppeltjes water
binnen in de
onderwaterbehuizing.
De opnamefunctie werkt niet.
Specificaties
Materiaal
Kunststof (PC, ABS), roestvrij staal, glas
Waterbestendigheid
O-ring, sluitklem
Drukbestendigheid
Tot op een diepte van 40 m onder water
Regelaars die vanaf de buitenkant bediend kunnen worden
Spanningsschakelaar, Functiekeuzeschakelaar, Sluitertoets, Zoomknop,
Flitserknop, Macroknop, Regelknop, Zelfontspanner, Opnamecontroletoets,
Menutoets, Beeldformaat/Wistoets, LCD-controle/LCD-aan/unit
Afmetingen
Circa 148
× 95 × 87 mm (b/h/d)
(exclusief uitstekende onderdelen)
Gewicht
Circa 410 g (alleen onderwaterbehuizing)
Bijgeleverd toebehoren
Onderwaterbehuizing (1)
Polsband (1)
Smeervet (1)
O-ring (1)
Afstandsstuk (1)
Handleiding en documentatie
Los verkrijgbare accessoires
Kleurenfilterset VF-MP5K
Armset VCT-MP1K
Onderwatervideolamp HVL-ML20M (dient te worden gebruikt met armset
VCT-MP1K en "InfoLITHIUM" batterij (serie M), (batterijlader serie M))
Wijzigingen in ontwerp en technische gegevens voorbehouden zonder
voorafgaande kennisgeving.
Causa/acciones correctivas
· Hay raspaduras o grietas en la junta tórica.
b Sustituya la junta tórica con otra nueva.
·La junta tórica no está puesta correctamente.
b Ponga la junta tórica uniformemente en la
ranura.
· La hebilla no está abrochada.
b Abroche la hebilla hasta que produzca un
chasquido.
· La batería se ha agotado.
b Cargue completamente la batería.
· El "Memory Stick" está lleno.
b Inserte otro "Memory Stick" o borre datos
que no necesite del "Memory Stick".
· La lengüeta de protección contra el borrado
del "Memory Stick" está puesta en LOCK.
b Ponga la lengüeta en la posición de
grabación o inserte un "Memory Stick"
nuevo.
Oorzaak en/of oplossing
· De O-ring is gekrast of gescheurd.
b Vervang de O-ring door een nieuw
exemplaar.
· De O-ring is niet correct aangebracht.
b Plaats de O-ring gelijkmatig in de groef.
·De sluitklem zit niet stevig dicht.
b Druk de sluitklem dicht totdat deze
vastklikt.
·De batterij is leeg.
b Laad de batterij volledig op.
· De "Memory Stick" is vol.
b Plaats een andere "Memory Stick" of wis
overbodige gegevens uit de "Memory
Stick".
· Het schrijfbeveiligingsnokje op de "Memory
Stick" staat op LOCK.
b Breng het nokje in de opnamestand of
plaats een nieuwe "Memory Stick".
G
H
K
4
1
1
12
1
2
F
I
E
3
J
12
1
Introducir
/Mando de control
Bevestigen/regelknop
Botón
(flash)/Mando de control
(Flitserknop)/regelknop
Botón
(MACRO)/
Mando de control
(Macroknop)/
regelknop
Botón
(revisión)/
Mando de control
(Opnamecontroletoets)
/regelknop
2
3
2
Botón MENU
MENU toets
Botón
(estado de
la pantalla LCD/
encendido/apagado
de la pantalla LCD)
(LCD-controle/
LCD-aan/uit) toets
2
3
(Autodisparador)/
Mando de control
(Zelfontspanner)/
regelknop
Botón
(tamaño de imagen/
borrado)
(Beeldformaat/
Wistoets)
E
1
2
Hebilla
Sluitklem
Espaciador (quítelo para usar
el portacámara subacuático)
Afstandsstuk (verwijderen
voor gebruik van
onderwaterbehuizing)
Botones de control
Regelknoppen
A
Botón de
apertura (OPEN)
OPEN toets
Botón
(tamaño de
imagen/borrado)
(Beeldformaat/Wistoets)
D
B
C
Gancho para la
correa de muñeca
Bevestigingsoog
voor polsband
Disparador
Sluitertoets
Botón POWER
Aan/uit-schakelaar
(POWER)
Cristal frontal
Glas aan
voorkant
Protector frontal
Voorglas-
beschermring
Rosca para montaje en trípode
Cuando utilice un trípode, cerciórese de que tenga un
tornillo de 5,5 mm o menos. Este equipo no podrá
sujetarse firmemente con tornillos largos. Además,
estos tornillos podrían dañar el equipo.
Statiefschroefgang
Voor opstelling op een statief dient u een statief met
een schroef die niet langer is dan 5,5 mm te
gebruiken. Dit apparaat is niet stevig te bevestigen op
een statief met een langere schroef. Bovendien zou
een langere schroef dit apparaat kunnen beschadigen.
Empaquetadura impermeable
Druppelbestendige pakking
Botones Zoom (W/T)/botones
(índice)/botones
/
(zoom de
reproducción)
Zoomtoetsen (W/T)/
(Indextoesten)/
/
(Weergave-zoomtoesten)
Botón
(estado
de la pantalla LCD/
encendido/
apagado de la
pantalla LCD)
(LCD-controle/
LCD-aan/uit) toets
Junta tórica
O-ring
Selector de modo
Functiekeuzeknop
Empaquetadura impermeable
Druppelbestendige pakking
Botón MENU
MENU toets