MDR-RF920RK/RF960RK
US Model
Canadian Model
SERVICE MANUAL
WIRELESS STEREO
HEADPHONE SYSTEM
Sony Corporation
Personal Audio Company
Published by Sony Engineering Corporation
9-877-524-01
2004B02-1
© 2004.02
SPECIFICATIONS
Ver 1.0 2004. 02
MDR-RF920RK and MDR-RF960RK are Composed
of the following models.
As for the service manual it is issued for each
component model, then please refer to it.
Photo : MDR-RF960RK
COMPONENT MODEL NAME FOR MDR-RF920RK/
MDR-RF960RK
General
Carrier frequency
913.5 914.5 MHz
Channel
Ch1, Ch2, Ch3
Modulation
FM stereo
Frequency response
MDR-RF920R : 20 20,000 Hz
MDR-RF960R : 10 22,000 Hz
Transmitter TMR-RF960R
Power source
DC 9 V: supplied AC power adaptor
Audio input
phono jacks/stereo mini jack
Dimensions
Approx. 133 x 124 x 136 mm
(5 1/
4 x 5 x 5
3/
8 in.)
(w/h/d)
Mass
Approx. 195 g (7 oz.)
MDR-RF920RK
MDR-RF960RK
Wireless Stereo Headphones MDR-RF920R
MDR-RF960R
Transmitter
TMR-RF920R
TMR-RF960R
Headphones MDR-RF920R, MDR-RF960R
Power source
Supplied rechargeable nickelmetal
hydride batteries BPHP550
or commercially available
(size AAA) dry batteries
Mass
Approx. 270 g (9.6 oz.) incl.
batteries
Supplied accessories
· AC power adaptor (1)
· Unimatch plug adaptor (1)
(stereo mini jack
y stereo phone plug)
· Connecting cord (1)
(phono plugs
y stereo mini plug), 1 m (3.3 ft.)
· Rechargeable nickel-metal hydride batteries (2)
Design and specifications are subject to change without notice.
2
MDR-RF920RK/RF960RK
·
AC power adaptor (1)
·
Unimatch plug adaptor (1)
(stereo mini jack
y stereo phone plug)
· Connecting cord (1)
(phono plugs
y stereo mini plug), 1 m (3.3 ft.)
· Rechargeable nickel-metal hydride batteries (2)
Ref. No.
Part No.
Description
Remark
ACCESSORIES
101
102
103
Note: The description used in the figure are those contained in the
instruction manual.
ACCESSORIES
***********
0 101
1-473-588-11 ADAPTOR, AC (AC-S901)
102
1-473-606-11 ADAPTOR, PLUG
103
1-827-229-11 CORD, CONNECTION
104
1-756-316-21 BATTERY, NICKEL.HYDROGEN
3-264-043-11 MANUAL, INSTRUCTION
(ENGLISH, FRENCH, SPANISH)
104
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour
la sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
3
MDR-RF920RK/RF960RK
MEMO
MDR-RF920RK/RF960RK
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
Ver.
Date
Description of Revision
1.0
2004.02
New