SONY ICF-C630 - Owner's Manual Immediate Download

3-249-145-21 (1)

FM/AM Clock Radio

Operating Instructions

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

INFORMATION

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the

equipment and receiver.

-- Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

-- Consult the dealer or an experienced radio/

TV technician for help.

Before You Begin

Thank you for choosing the Sony Dream Machine!

It will give you many hours of reliable service and

listening pleasure.

Before operating the radio, please read these

instructions thoroughly and retain them for future

reference.

Features

· Dual alarm FM/AM clock radio.

·You can set Radio and Melody alarms to defferent

time. (You can select Melody sound from the

following; 1. Buzzer, 2. "Morning" from "Peer

Gynt," by Grieg - suite No.1, Op.46, 3."For Eliza"

by Beethoven.)

·Triple display--main display for the clock, and two

sub-displays for the alarms.

·Nap timer--Count down Timer (10,20,30,60,90,120

minutes)

· Extendable Snooze time from 10 to 60 minutes.

· LCD with brightness adjustment backlight. (High/

Medium/Low)

·D.S.T. (Daylight Saving Time)--Summer time

adjustment (one-hour skip function).

·AC/DC operation--You can place the radio

anywhere you like using it with the AC power

adaptor or the batteries.

Precautions

· Operate the unit only on 4.5 V DC. For battery

operation, use two size AA (R6) batteries. For AC

operation, use only the recommended AC power

adaptor.

·The unit is not disconnected from the AC power

source (mains) as long as it is connected to a wall

outlet, even if the unit itself has been turned off.

·The nameplate indicating operating voltage, etc. is

located on the bottom exterior.

·Avoid exposure to temperature extremes, direct

sunlight, moisture, sand, dust or mechanical shock.

Never leave in a car parked under the sun.

· Should any solid object or liquid fall into the unit,

disconnect the AC power adaptor and remove the

batteries, and have the unit checked by qualified

personnel before operating it any further. Make sure

that no liquid or foreign material enters the DC IN

4.5 V jack of the unit. This may lead to the

malfunction of the unit.

· In vehicles or buildings, radio reception may be

difficult or subject to interference. Try listening near a

window.

ICF-C630

Printed in China

DREAM MACHINE is a trademark of Sony Corporation.

· Since a strong magnet is used for the speaker, keep

away personal credit cards using magnetic coding or

spring-wound watches from the unit to prevent

possible damage from the magnet.

· When the casing becomes soiled, clean it with a soft

dry cloth moistened with mild detergent solution.

Never use abrasive cleansers or chemical solvents,

as they may deform the casing.

If you have any questions or problems concerning

your unit, please consult your nearest Sony dealer.

Troubleshooting

Should any problem occur with the unit, make the

following checks to determine whether or not

servicing is required.

If the problem persists, consult your nearest Sony

dealer.

The clock does not show the correct time.

· Has an electrical power outage lasting more than 4

minutes occurred?

The radio, buzzer or melody alarm does not

sound at the preset alarm time.

· Has the desired radio, buzzer or melody alarm been

activated? (i.e. Is the ALARM

or ALARM

indication lit?)

The radio alarm is activated but no sound

comes on at the preset alarm time.

· Has a station been tuned in before setting the radio

alarm?

·The volume is set to the minimum level.

Very weak or interrupted sound, or

unsatisfactory reception.

·Weak batteries.

·When in a vehicle or building, move closer to a

window.

Display is dim, or no indication is displayed.

·Weak batteries.

·The unit is being used in extremely high or low

temperatures or in a place with excessive moisture.

Sound is not heard and "E" appears in the

display.

·Batteries are exhausted.

Specifications

Time display:

12-hour system

Frequency range:

FM: 87.5108 MHz

AM: 5301 710 kHz

Speaker:

Approx. 5.7 cm (1/4 in), 4

Power output:

120 mW (at 10% harmonic distortion)

Power requirements:

3 V DC, two Size AA (R6) batteries

External power source:

DC IN 4.5 V

Dimensions:

Approx. 94

× 104 × 82 mm (w/h/d)

(3 3/4

× 4 1/

× 3 1/

4 in) incl. projecting parts and

controls

Approx. 94

× 103 × 82 mm (w/h/d)

(3 3/4

× 4 1/

× 3 1/

4 in) not incl. projecting parts

and controls

Mass:

Approx. 313 g (11 oz) incl. batteries

Accessories supplied:

AC power adaptor (1)

Design and specifications are subject to change

without notice.

Choosing Power

Sources

(See Fig. A)

Installing the Batteries

Press the tab of the battery compartment lid inward

and pull upward to open the lid.

Install two Size AA (R6) batteries (not supplied) with

the correct polarity and close the lid.

"AM12:00" flashes in the display when you

install batteries for the first time. To stop the display

from flashing, set the clock. (See "Setting the Clock.")

Note

When operating the unit on batteries, remove the AC

power adaptor from the DC IN jack. The unit cannot

be operated on batteries when the AC power adaptor is

connected to the DC IN jack.

Battery Life (Approx. hours)

(JEITA*)

When using

Sony alkaline size AA (LR6)

Sony size AA (R6)

* Measured by JEITA (Japan Electronics and

Information Technology Industries Association)

standards. The actual battery life may vary

depending on the circumstance of the unit.

When to replace the batteries

When the batteries become weak, the sound becomes

weak and distorted. "E" flashes on the display. When

the batteries are completely exhausted, "E" appears

on the display and the power is turned off.

Note on replacing the batteries

Do not take more than 3 minutes to replace the

batteries, otherwise the clock and standby settings will

be deleted from the memory. Should that happen,

reset the functions again.

After the batteries are replaced, press RADIO ON/

OFF to turn the indication off.

Notes on Batteries

· Do not charge dry batteries.

· Do not carry dry batteries together with coins or

other metallic objects. It can generate heat if the

positive and negative terminals of the batteries

accidentally come into contact with metallic objects.

· Do not use different types of batteries at the same

time.

·When you replace the batteries, replace all with new

ones.

Using House Current

(See Fig. B)

Connect the Sony AC power adaptor to the DC IN 4.5

V jack firmly, and plug it into a wall outlet. The power

source will automatically switch to the external power

source even if batteries are installed.

Notes on the AC power adaptor

·When operating the unit with an external power

source, do not remove the batteries.

These batteries serve to backup the clock and

standby settings. Since batteries discharge in this

case as well, we recommend changing them about

once a year.

· Before connecting and disconnecting the external

power source plug, be sure to turn off the radio.

Otherwise, "E" may be displayed.

When this occurs, turn on the radio so that "E"

disappears.

· When operating the unit with the internal batteries,

remove the AC power adaptor from the wall outlet

and the DC IN 4.5 V jack. Make sure that the plug

of the external power source is disconnected before

operating the unit.

· Use the recommended Sony AC power adaptor only.

The polarity of the plugs of other manufacturers

may be different. Failure to use the recommended

AC power adaptor may cause the unit to

malfunction.

To DC IN

4.5 V jack

AC power

adaptor

To a wall outlet

Size AA (R6)

× 2

Insert the # side of the battery first.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Rear

For customers in the USA

Please register this product on line at http://www.sony.com/productregistration.

Proper registration will enable us to send you periodic mailings about new products, services, and other important

announcements. Registering your product will also allow us to contact you in the unlikely event that the product

needs adjustment or modification. Thank you.

Bottom

Polarity of the plug

NAP

SLEEP

BAND

TUNE

ON/OFF

ALARM MELODY

ALARM RADIO

RADIO

ON/OFF

BA CKLIGHT

SNOOZE/ SLEEP OFF

TIME SET

D.S.T

SUMMER T.

CLOCK

VOL

123

FM AM

RADIO

SLEEP

NAP

You can listen to buzzer and two kinds of

melodies by pressing BACKLIGHT

·SNOOZE/

SLEEP OFF while "AM 12:00" is flashing

(Demo function). To stop buzzer or melodies,

press RADIO ON/OFF. To listen to buzzer or

melodies again, press BACKLIGHT

·SNOOZE/

SLEEP OFF.

To deactivate Demo function, set the clock. (See

"Setting the Clock.")

Setting the

brightness of the

backlight

Note

The brightness of the backlight is fixed when using

the unit on batteries.

When using batteries:

Press BACKLIGHT

·SNOOZE/SLEEP OFF.

The backlight will light for 5 seconds.

If any buttons are pressed while the backlight is on,

the backlight will turn off 5 seconds after pressing the

button.

When using on House current:

The initial setting for the brightness of the backlight is

High.

Press BACKLIGHT

·SNOOZE/SLEEP OFF for 2

seconds.

Each press changes the brightness of the backlight as

follows.

Setting the Clock

The display will flash "AM 12:00" when the batteries

are installed or the AC power adaptor is plugged in for

the first time.

1 Press and hold down CLOCK/D.S.T. for a

few seconds.

You will hear a beep and the hour will start to

flash in the display.

2 Press TIME SET + or until the correct

hour appears in the display.

3 Press CLOCK/D.S.T once .

You will hear a beep and the minutes will start to

flash in the display.

4 Repeat steps 2 and 3 to set the minutes.

After setting the minutes, press CLOCK/D.S.T.

You will hear two beeps and the clock will start

counting from zero second.

·To set the current time rapidly, hold down TIME

SET + or .

·To adjust the time exactly to the second, press

CLOCK/D.S.T simultaneously with the time

signal.

To change the display to the

daylight saving time (summer

time) indication

Press CLOCK/D.S.T.

" is displayed and the time indication changes to

summer time.

To deactivate the summer time function, press

CLOCK/D.S.T. again.

Improving the

reception

FM: Extend the FM wire antenna fully to improve the

reception (see Fig. C-A).

AM: Rotate the unit horizontally for optimum

reception. A ferrite bar antenna is built into the

unit (see Fig. C-B).

Do not operate the unit over a steel desk or metal

surface, as this may lead to interference of reception.

Playing the Radio

1 Press RADIO ON/OFF to turn on the

radio.

2 Press BAND to select the band.

3 Use TUNE to tune in to the desired station.

4 Adjust volume using VOL.

·To turn off the radio, press RADIO ON/OFF.

Setting the Alarm

Before setting the time for the radio, buzzer and

melody alarms, make sure you have set the current

time (see "Setting the Clock"). For the radio alarm,

make sure you have tuned in to a radio station

beforehand (see "Playing the Radio").

To Set the Alarm Time

To Set the Radio Alarm

1 Press and hold down ALARM A for a few

seconds.

You will hear a beep. The ALARM

indication

and the hour will start to flash in the display.

2 Press TIME SET + or until the correct

hour appears in the display.

3 Press ALARM A once.

You will hear a beep and the minutes will start to

flash in the display.

4 Repeat steps 2 and 3 to set the minutes.

After setting the minutes, press ALARM A.

You will hear two beeps which confirm the

setting.

To Set the Buzzer or Melody

Alarm

1 Press and hold down ALARM B for a few

seconds.

You will hear a beep. The ALARM

indication

and the hour will start to flash in the display.

2 Press TIME SET + or until the correct

hour appears in the display.

3 Press ALARM B once.

You will hear a beep and the minutes will start to

flash in the display.

4 Repeat steps 2 and 3 to set the minutes.

5 Repeat steps 2 and 3 to select the alarm

sound from buzzer, melody 1 or melody 2.

After setting the alarm, press ALARM B.

You will hear two beeps which confirm the

setting.

You can choose alarm sound from one of the

following.

1. Buzzer

2. "Morning" from "Peer Gynt," by Grieg -

suite No.1, Op.46

3. "For Eliza" by Beethoven

Note

To adjust the radio alarm volume, turn VOL. The

volume for buzzer and melody is fixed.

ALARM ON--

To activate the alarm

For the radio alarm:

Press ALARM A.

The ALARM

indication appears and the alarm time

is shown.

For the buzzer or melody alarm:

Press ALARM B.

The ALARM

indication appears and the alarm time

is shown.

The alarm will come on at the preset time and will

automatically turn itself off after about 30 minutes.

Notes

· When the alarm comes on at the preset time,

ALARM

or ALARM

indication flashes.

· If you do not set the alarm time and ALARM

ALARM

indication is lit, the alarm will sound at

PM 12:00.

·For the buzzer alarm, the beeping of the alarm

becomes more rapid after about every 15 to 20

seconds in 3 progressive stages.

ALARM OFF--

To Stop the Alarm

Press RADIO ON/OFF to turn off the alarm.

The alarm will come on again at the same time the

next day.

To Deactivate the Alarm

For the radio alarm, press ALARM A to turn off

ALARM

indication.

For the buzzer or melody alarm, press ALARM B to

turn off ALARM

indication.

Notes

· The alarm does not function unless you set the clock

and activate the alarm function.

· If both Radio alarm and Buzzer or Melody alarm

are set for the same time, the radio alarm will take

priority.

To Doze for a Few More

Minutes

Press BACKLIGHT

·SNOOZE/SLEEP OFF.

The radio, buzzer or melody turns off but will

automatically come on again after about 10 minutes.

Every time you press BACKLIGHT

·SNOOZE/

SLEEP OFF, the snooze time changes as follows:

The display shows the snooze time for a few seconds

and returns to show the current time. When you press

BACKLIGHT

·SNOOZE/SLEEP OFF after the

current time appeared, the snooze time starts from 10

minutes again.

The maximum length of the snooze time is 60

minutes.

· While the snooze function is operating, the alarm

indication flashes.

Setting the Sleep

Timer

By setting the sleep timer, you can fall asleep to the

radio sound. The radio will turn off automatically

after a set time. The sleep timer can be set to turn off

after 15, 30, 60 or 90 minutes.

1 Tune in to the desired station. (See "Playing

the Radio .")

2 Press SLEEP.

The sleep timer setting of "90" appears and

"SLEEP" lights up in the display.

3 Press SLEEP repeatedly to select the

desired sleep timer setting while "SLEEP"

is lit.

Each press changes the display as follows:

You will hear two beeps when the display turns from

"OFF" to "90".

The radio will play for the time you set, then shut off.

To Change the Sleep Timer

Setting

Press SLEEP repeatedly to select the desired sleep

timer setting.

High

Low

Medium

OFF

To Deactivate the Sleep Timer

Press BACKLIGHT

·SNOOZE/SLEEP OFF to turn

off the radio before the set time has elasped, or press

SLEEP to set the Sleep timer to "OFF" in step 3.

"SLEEP" disappears from the display.

To Use Both Sleep Timer

and Alarm

You can fall asleep to the radio and also be awakened

by the radio, buzzer or melody alarm at the preset

time.

1 Set the alarm. (See "Setting the Alarm.")

2 Set the sleep timer. (See "Setting the Sleep

Timer.")

Using the NAP

Timer (Count Down

Timer)

The NAP timer sounds the buzzer after a preset time

duration.

Press NAP repeatedly until the desired minutes is

displayed.

Each press changes the display as follows:

You will hear two beeps when the display turns from

"OFF" to "10".

" appears and the NAP time are displayed for

a few seconds.

NAP timer starts counting down the NAP time.

When selected NAP time has passed, the buzzer

comes on, and "

" flashes in the display.

The buzzer is turned off automatically after about 30

minutes.

To Stop NAP Timer

Press NAP or RADIO ON/OFF to turn off the

buzzer.

To Deactivate NAP Timer

Press NAP. "

" go off.

FM wire antenna

There is a tactile

dot beside VOL to

show the

direction to turn

up the volume.

OFF

(current time)

120

FM wire

antenna