background image
4-253-728-11(2)
Custom Integrated
AV System
2004 Sony Corporation
CAV-M1000ES
Installation Manual
Owner's Record
The model and serial numbers are located on the rear panel. Record the model
and serial numbers in the spaces provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No.
Serial No.


background image
2US
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
­ Reorient or relocate the receiving
antenna.
­ Increase the separation between the
equipment and receiver.
­ Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
­ Consult the dealer or an experienced
radio/TV technician for help.
CAUTION
You are cautioned that any changes or
modification not expressly approved in this
manual could void your authority to
operate this equipment.
If you have any questions about this
product, you may call;
Sony Customer Information Service Center
1-800-222-7669 or
http://www.sony.com/
The number below is for the FCC related
matters only.
Regulatory Information
Declaration of Conformity
Trade name: SONY
Model No.: CAV-M1000ES
Responsible Party: Sony Electronics
Inc.
Address: 16450 W. Bernardo Dr.
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Declaration of Conformity
Trade name: SONY
Model No.: RM-TP100
Responsible Party: Sony Electronics
Inc.
Address: 16450 W. Bernardo Dr.
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Important Safety Instruction
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
11Only use attachments/accessories
specified by the manufacturer.
12 Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
RECYCLING NICKEL METAL HYDRIDE
BATTERIES
Nickel Metal Hydride batteries are
recyclable.
You can help preserve our
environment by returning
your used rechargeable
batteries to the collection and
recycling location nearest
you.
For more information regarding
recycling of rechargeable batteries, call
toll free
1-800-822-8837, or visit http://
www.rbrc.org/
Caution: Do not handle damaged or
leaking Nickel Metal Hydride batteries.
Welcome!
Thank you for purchasing the Sony Custom
Integrated AV System. Before operating the
unit, please read this manual thoroughly
and retain it for future reference.


background image
3US
TABLE OF CONTENTS
Chapter 1
Getting Started
Features 4
Unpacking 6
Parts and Controls 7
Before Customizing the System
14
Chapter 2
Setting up the Main Unit
Installing the Main Unit 15
Hooking up the Main Unit 17
Selecting the Source and the Volume Level
of the Main Unit 19
Setting up the Remote Code and the Baud Rate
­ SETUP Mode 20
Learning the Remote Code for a Connected
Component
­ LEARN Mode 21
Testing Learned Remote Code ­ CHECK Mode 23
Customizing the Main Unit
­ INSTALLATION Mode 23
Chapter 3
Setting up the Keypad
Installing the Keypad 26
Hooking up in Each Zone 28
Customizing the Keypad 29
Testing the Components 30
Chapter 4
Other Information
Precautions 31
Troubleshooting 32
Error Messages 33
Specifications 34
Chapter 5
Appendix
PRESET and LEARN Mode Code List 35
Using the RF Remote Control 39
Using the Keypad 40
Using the IR Remote Control for the Keypad 41
Index 42


background image
4US
Chapter 1
Getting
Started
This chapter provides you with
information on the features of the
system, its accessories, and the parts
and controls of each component.
Features
You can control up to eight audio/video sources in up to
six zones with this Custom Integrated AV System. The
system consists of:
­ a Main Unit
­ an RF Remote Control
­ Keypad(s) (optional)
­ IR Remote Controls for Keypad(s) (optional)
You can enjoy the audio/video source and the output
components by using a Keypad in each zone and an RF
Remote Control in the main zone. This Custom Integrated
AV System allows you to
­ Distribute audio/video signals from eight independent
sources to six separate zones.
­ Control volume adjustment, such as muting, bass and
treble adjustments for each of the six zones.
­ Control up to eight source components by using an RF
Remote Control, a Keypad, or via RS 232C commands.


background image
5US
Getting
Started
Main Unit
· Zones: Up to six zones receive up to eight source
audio/video signals.
­ Preamp Outs: Four fixed outputs for zones 1 to 4,
and two variable outputs for zones 5 and 6.
­ Amplification: All six zones have built-in stereo
audio amplifiers at 30 Watts per channel.
­ Video outputs for all six zones.
­ Keypad connections: RJ45 connectors for all six zones
using CAT5 cables.
· Sources: Up to eight audio/video sources can be
selected by all six zones.
· Remote code entry: Remote code commands can be
learned by the Main Unit.
­ on your computer
­ on the Main Unit
· 12 V trigger: Six zone-specific 12 V status outputs; each
300 mA max, total 1.2 A.
· RS232C port (Front): Allows you to connect the Main
Unit to your computer to update the settings or
firmware.
· RS232C ports (Rear): Allow you to connect a Sony DVD
Mega Changer (ex. DVP-CX777ES) and a Sony A/V
Receiver (ex. STR-DA5000ES) to the Main Unit.
Keypad
· LCD contrast adjustment.
· Connecting IR IN to an IR emitter enables you to use
the IR Remote Control for the additional range.
· RJ45 connectors enable you to use two Keypads in a
single zone.
RF Remote Control
· LCD panel configurable through your computer.
· Controls the audio/video sources in the main zone and
the other zones.
· Customize touch panels via an RS232C cross cable
connected to your computer.
Audio/Video
Source 1 ~ 8
Each input of the
A/V Receiver
Audio/Video
Signal
Serial
RJ45
Zone
Status
Audio/Video
Signal
Zone 1 ­ 6
IR
Zone 1 ­ 6
Display/Signal
Main
Keypad
Subsidiary
Keypad
IR Remote Control
for the Keypad
Computer
RS232C
Preset Commands
RF Antenna
Preset Commands
: Signal
: Command
RF Remote Control
Audio/Video
Signal