background image
XR-VS400
XR-VS200
S-VS400V
S-VS200V


background image
En
Ventilation
When installing this unit, make sure to leave space around the
unit for ventilation to improve heat radiation (at least 30 cm at top,
15 cm at rear, and 15 cm at each side). If not enough space is
provided between the unit and walls or other equipment, heat
will build up inside, interfering with performance or causing
malfunctions.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe place
for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
Energy-saving design
This system is designed to use 1 W of electricity when
power is switched to Standby.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
· Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
· The use of optical instruments with this product will increase eye hazard.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the
equipment.
VOLTAGE
SELECTOR
240V
220 ­
230V
110 ­
127V
VOLTAGE
SELECTOR
240V
220 ­
230V
110 ­
120V
LINE VOLTAGE SELECTOR SWITCH
Mains voltages in Saudi Arabia are 127 V and 220 V only.
The line voltage selector switch is located on the rear panel
of this receiver. Check that it is set properly before plugging
the power cord into the outlet. If the voltage is not properly
set or if you move to an area where the voltage require-
ments differ, adjust the selector switch as follows:
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the arrow points to
the voltage value of your area.
THE STANDBY/ON BUTTON IS SECONDARY
CONNECTED AND THEREFORE DOES NOT SEPARATE
THE UNIT FROM MAINS POWER IN STANDBY POSITION.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
IMPORTANT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION 240V
Power source voltage is factory adjusted at 240 volts. If AC
voltage in your area is different, refer to operating instructions
and change voltage selector setting.
This product is for general household purposes. Any failure
due to use for other than household purposes (such as
long-term use for business purposes in a restaurant or use
in a car or ship) and which requires repair will be charged
for even during the warranty period.
CAUTION
This product contains a laser diode of higher class than 1.
To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: rear of the unit
CLASS 1
LASER PRODUCT
Round 2-pin AC plug model
Flat blade 2-pin AC plug model


background image
VOLTAGE
SELECTOR
240V
220 ­
230V
110 ­
127V
VOLTAGE
SELECTOR
240V
220 ­
230V
110 ­
120V
CLASS 1
LASER PRODUCT
ChH


background image
4
En
Before You Start
1
9 Recording Cassette Tapes
Making tape recordings .................................................. 45
Automatically recording CDs ....................................... 47
Copying tapes ............................................................. 48
Improving AM tape recordings ..................................... 48
10 Using Sound Effects
Using the sound morph .................................................. 49
Using preset effects ....................................................... 49
Audio preset mode ...................................................... 49
Visual preset mode ...................................................... 49
Changing presets using the remote .............................. 49
Using individual sound effects ........................................ 50
Equalizer mode ........................................................... 50
Zoom Surround mode ................................................. 50
P.Bass mode ................................................................ 50
Changing sound effects using the remote ..................... 51
Saving your own settings ................................................ 51
Changing the sound display............................................ 51
Muting the sound ........................................................... 51
11 Using the Timer
Setting the wake-up timer .............................................. 52
Setting the sleep timer ................................................... 53
Setting the record timer ................................................. 54
Canceling the timer ....................................................... 55
12 Remote Control of your TV
Remote Control of your TV ............................................ 56
13 Additional Information
Taking care of your system ............................................. 57
Disc lens cleaner .......................................................... 57
Taking care of your discs ................................................ 57
Storing discs ................................................................ 58
Discs to avoid .............................................................. 58
Using cassette tapes ....................................................... 59
Tapes you should avoid ................................................ 59
Protecting your recordings .......................................... 59
Troubleshooting ............................................................. 60
Specifications ................................................................ 62
Switching the demo mode on/off ....................... Back cover
Contents
1 Before You Start
Checking what's in the box ............................................... 6
Using this manual ............................................................. 6
Putting the batteries in the remote ................................... 6
Using the remote control ................................................. 7
Finding a suitable location ................................................ 7
Avoiding condensation problems ................................... 8
Moving the system unit ..................................................... 8
Discs compatible with this system ..................................... 8
2 Connecting Up
The rear panel ................................................................. 9
Connecting the speakers ................................................ 10
Connecting the front speakers ..................................... 10
Connecting to your TV .................................................... 11
Setting the TV format ................................................... 11
Connecting the radio antennas ....................................... 12
Connecting external antennas ...................................... 13
Connecting the power .................................................... 13
Connecting auxiliary components .................................. 14
3 Controls & Displays
Display.......................................................................... 15
Front panel .................................................................... 16
Remote control ............................................................... 18
4 Getting Started
Switching on and setting the clock ................................. 20
Waching Video CDs ........................................................ 22
Improving Video CD picture quality............................. 23
Summary of playback controls for Video CDs .............. 24
Navigating Video CD PBC menus ................................. 25
On Screen Display(OSD) ............................................. 25
Playing CDs ................................................................... 26
Summary of playback controls for CDs ........................ 27
Changing discs ............................................................... 28
Tuning in stations ........................................................... 29
Improving poor FM reception ...................................... 30
Playing cassette tapes ..................................................... 30
Resetting the tape counter ........................................... 32
Relay play .................................................................... 32
5 More VCD/CD Features
Programming a playlist ................................................... 33
Using repeat play........................................................... 33
Using random play......................................................... 34
Searching by time (VCD Only) ........................................ 34
Selecting tracks by freeze-frame (VCD Only) .................. 35
Freeze-frame, frame advance, and slow-motion (VCD Only) .. 36
Starting from where you last stopped (VCD Only) .......... 37
6 Playing MP3s (XR-VS400 only)
Playing MP3s (XR-VS400 only) ...................................... 38
Searching for folders and tracks .................................. 38
Using random play....................................................... 39
Using repeat play........................................................ 39
Displaying MP3 information ........................................ 40
Making a program list .................................................. 40
MP3 compatibility information ...................................... 41
7 Singing Karaoke
Singing karaoke ............................................................. 42
8 More Tuner Features
Saving stations for quick recall ....................................... 44
Listening to station presets .......................................... 44
Changing the frequency step .......................................... 44


background image
1
5
ChH