1
CS-G405-K/Q
Service
Manual
ORDER NO.
PET99018
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1 B-9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00, Wheelock Place, Singapore 238880
©PIONEER CORPORATION 1999
1999 Printed in U.S.A.
HOW TO REASSEMBLE AND
DISASSEMBLE
65S
This service manual is intended for qualified service technicians; it is
not meant for the casual do-it- your selfer. Qualified technicians have
the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by
this manual.
Improperly performed repairs can adversely affect the safety and
reliability of the product and may void the warranty. If you are not
qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service
technician.
SPEAKER SYSTEM
TZ-SW05
·
The woofer is attached to the bottom board by external screws. To
detach it, unfasten those screws.
·
The amplifier assembly is attached to the backboard by external
screws. To detach it, unfasten those screws. (Basically this
amplifier is whole change only.)
·
The foot may be detached by removing one external screw. To
attach, refasten foot with screw.
2
CS-G405-K/Q
Mark No. Description
Parts No.
Mark No. Description
Parts No.
For Packing
TZ-SW05
Transducer
257058
Front Port Flare
255829
Rear Port Flare
255834
Paper Port Tube
258848
Foot
255849
Amplifier Assembly
255874
Screw (for Trans and Amplifier)
222016
Screw (for Foot)
221904
Instruction Manual
257909
RCA Cable Accessory Pack
255245
Packing Case
256842
Corner Pad Assy Top
256748
Corner Pad Assy Bottom
235310
Poly Bag
256911
PARTS LIST
NOTES: · Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
· The "
" mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.