PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2001
PFS-SDC NOV. 2001 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the baffle by its bosses and press-
fitting. To detach it, pry it open by inserting a flat blade tool
between the grille and the cabinet. Be careful not to
damage the grille or the cabinet.
The speaker units are attached to the cabinet by 8 external
screws. To detach them, first remove the screws. Next
unfasten those screws. Then remove the speaker units.
When attaching them, their terminals have to face the
centre part of the cabinet.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Input terminal + Wires
Screw 4 x 12 mm
Screw 3 x 8 mm
Cables + Stickers
Top foam protector
Mounting panels + Screws
Bottom foam protector