PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2002
T ZZM SEPT. 2002 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the baffle by its bosses and press-fit-
ting. To detach it, pry it open by inserting a flat blade tool be-
tween the grille and the cabinet. Be careful not to damage the
grille or the cabinet.
The speaker units are attached to the cabinet by 8 external
screws. To detach them, first remove the grilles. Next unfasten
those screws. Then remove the speaker units. When attaching
them, their terminals have to face the centre part of the cabinet.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Fung Nut M5
Screw (4 x12 mm)
Screw (3 x 8 mm)
Top Foam Protector
Bottom Foam Pad
Cables (Speaker Cords)
Mounting Panel + Screws