ORDER NO.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER ELECTRONIC CORPORATION 1998
RRV2042
T-ZZW OCT. 1998 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
SPEAKER SYSTEM
S-A555
XE
S-A550 XE
The cosmetic baffle is attached to the baffle by its bosses and
press-fitting. To detach it, pry it open by inserting a flat blade
screwdriver into the cosmetic baffle lower side. Be careful not
to damage the cosmetic baffle and cabinet in this case.
The woofer is attached to the baffle by 4 external screws. To
detach it, first remove the cosmetic baffle. Next unfasten those
screws. Then remove the woofer. When attaching it, face its
terminal downward.
The tweeter is attached to the spacer by inserting. To detach it,
first remove the cosmetic baffle. Next pull it off the spacer.
Then remove the tweeter. When attaching it, insert the tweeter
in the spacer.
These products are components of system.
For the operating instructions, refer to the service manual RRV2047 for XR-A660, XR-A550.
The midrange, together with the spacer, is attached to the
baffle by 2 external screws. To detach it, first remove the cos-
metic baffle. Next unfasten those screws and pull the midrange
and the spacer off. Then remove the midrange and the spacer.
When attaching it, first fit the boss into the hollow on the
spacer. Next the left one, face its terminal lower right. Then the
right one, face its terminal lower left. When attaching the
spacer, fit the boss into the hole on the baffle. Then fasten the
midrange and the spacer together.
2
Mark No.
Description
Part No.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
S-A555, S-A550
Network ASSY (FRWN-148)
NSP
Cabinet (L)
FRMM-178
NSP
Cabinet (R)
FRMM-179
Network ASSY
FRWN-148
NSP
Label Back (L)
FRAN-249
NSP
Label Back (R)
FRAN-250
Input Terminal
FRKX-013
NSP
Acoustic Absorbent
FRMV-027
Spacer
FRNK-334
Duct
FRNK-339
Cosmetic Baffle ASSY (L)
FRXB-030
NSP
Punching Net
FRNC-016
NSP
Punching Net (L)
FRNC-017
NSP
Cosmetic Baffle (L)
FRNK-337
Cosmetic Baffle ASSY (R)
FRXB-031
NSP
Punching Net
FRNC-016
NSP
Punching Net (R)
FRNC-018
NSP
Cosmetic Baffle (R)
FRNK-338
Speaker (Woofer)
P14EU75-52D
Speaker (Mid-range)
E52AP39-53C
Screw (for Woofer)
BYC40P200FMC
Screw (for Mid-range)
RWC41P350FMC
Speaker Cord
FRDD-041
Non-Skid Pads
FREC-021
Protector
FRHA-164
Protection Mat S3
FRHC-028
Packing Case
FRHG-232
For Packing
SCHEMATIC DIAGRAM
NSP
Cabinet (L)
FRMM-176
NSP
Cabinet (R)
FRMM-177
Network ASSY
FRWN-148
NSP
Label Back (L)
FRAN-247
NSP
Label Back (R)
FRAN-248
Input Terminal
FRKX-013
NSP
Acoustic Absorbent
FRMV-027
Spacer
FRNK-334
Duct
FRNK-340
Cosmetic Baffle ASSY (L)
FRXB-028
NSP
Punching Net
FRNC-016
NSP
Punching Net (L)
FRNC-017
NSP
Cosmetic Baffle (L)
FRNK-335
Cosmetic Baffle ASSY (R)
FRXB-029
NSP
Punching Net
FRNC-016
NSP
Punching Net (R)
FRNC-018
NSP
Cosmetic Baffle (R)
FRNK-336
Speaker (Woofer)
P14EC75-51D
Speaker (Mid-range)
E52AP39-53C
Screw (for Woofer)
BYC40P200FMC
Screw (for Mid-range)
RWC41P350FMC
Speaker Cord
FRDD-041
Non-Skid Pads
FREC-021
Protector
FRHA-164
Protection Mat S3
FRHC-028
Packing Case
FRHG-231
For Packing
S-A555/XE
S-A550/XE
Woofer
Mid-range
I N
Tweeter
1.8
µF/63V
Blue
White
White
Blue
Green
Red
Black
Green
White
White
Blue