background image
ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
RRV3501
T ­ ZZK SEPT. 2006 Printed in Japan
STEREO TURNTABLE
PL-990
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model No.
Order No.
Remarks
PL-990/WYXCN1
RRV1608
¶ This service manual should be used together with the following manual(s):
Model
Type
Power Requirement
Remarks
PL-990
WYXCN157
AC 220 V to 240 V


background image
2
1
23
4
12
3
4
C
D
F
A
B
E
PL-990
CONTRAST TABLE
PL-990/WYXCN157 and WYXCN1 are constructed the same except for the following :
Ref.
Part No.
No.
Mark
Symbol and Description
PL-990
PL-990
Remarks
/WYXCN1
/WYXCN157
PACKING SECTION
P3- 1
Packing case
PZH1007
507-F908-1809D
P3-12
NSP
Warranty Card
PZR1005
ARY7065
NSP
Rating Label
PZR1016
501-F907-1056A
IEC65-7 Caution
Not used
ARM7106
Label (WEEE)
Not used
ARW7322
EXTERIOR SECTION
P5- 2
Press Set
PZN1026
100-29FBKEU-144
P5- 4
Panel
PZN1080
100-900-337
P5- 5
Bottom Plate
PZN1081
100-800-338A
P5-23
Platter
PZN1082
200-F801-203
P5-50
Decorative Plate
PZN1084
501-F907-281A
P6-130
NSP
Shaft
PZN1097
Not used
P6-133
Mirrow
PZN1093
501-F907-1846
P6-140
Motor Assy
PZX1025
704-F610-3335
1. CONTRAST OF MISCELLANEOUS PARTS
jp
f
y
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to
mark on product are used for disassembly.
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
NOTES: