Operating instructions
Mode d'emploi
Manual de instrucciones
Table top stand
Support de couverture de table
Soporte de mesa
PDK-1012
2
En
Thank you for buying Pioneer's product.
Please read through the Operating Instructions to learn how
to operate your model safely and properly.
Please be advised to keep the Operating Instructions in
your place for future reference.
Contents
Cautions ................................................................... 2
Checking the Enclosed Parts .................................. 3
Assembling the Stand ............................................ 4
Attaching the Plasma Display ................................ 5
Forward/Backward Angle of Inclination
Adjustment Mechanism ......................................... 6
Installing the Product on a Rack etc. ..................... 7
Preparing the Cables ............................................... 8
Preventing Equipment from Falling Over ............. 9
Detaching the Plasma Display from the Stand .... 10
Specifications ........................................................ 10
Dimensions Diagram ............................................ 10
Installation
¶ Consult your dealer if you encounter any difficulties
with this installation.
¶ Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
Cautions
This product is a table top stand exclusively designed for
plasma displays (PRO-1120HD/PRO-920HD/PRO-1110HD/
PRO-910HD) from Pioneer. Use with other model is capable
of resulting in instability causing possible injury. For further
information, please contact the store where you purchased
your display.
Do not install or modify the product other than specified.
Do not use this stand for a plasma display other than those
designated and do not modify it or use it for other pur-
poses.
Improper installation is extremely dangerous because it
may result in it falling over or other accident.
Installation Location
· Select a location that is strong enough to support the
weight of the stand and the displays.
· Make sure to place it in a level and stable location.
· Do not install it outdoors, at a hot spring, or near a beach.
· Do not install the stand where it may be subjected to
vibration or shock.
Assembling and Installation
· Assemble the stand in accordance with the assembly
instructions and securely attach all screws at the
designated locations.
There have been cases where unforeseen accidents
such as the equipment breaking or falling over
occurred after the installation of the display because
the stand was not installed as instructed.
· The display must always be installed by two or more
people to assure it is installed safely.
· Before installation, turn off the power for the display
and peripheral devices then remove the power cord
plug from the power outlet.
This product rotates 10° to the left and right and inclines 2°
forward and backward.
Do not place objects within the range of rotation of this
product and the plasma display. Install this product so that
during routine use or when it is rotated, it does not protrude
from the rack or other location it has been installed. Failure
to do so could cause unforeseen accidents such as the
equipment breaking or falling over (see page 7).
Prevent accidents caused by the product falling over by
taking reliable measures to prevent it from falling over (see
Page 9).
CAUTION
This symbol refers to a hazard or unsafe practice which
can result in personal injury or property damage.
3
En
English
·
Table top stand x 1
·
Support columns x 2
·
Cable binders x 2
·
Installation screws 1 (M8 x 16 mm [5/8 inch]: silver) x 4
[used to anchor the support columns and the table top stand]
·
Installation screws 2
(M8 x 30 mm [1-3/16 inch]:
black) x 2
·
Installation screws 3
(M8 x 40 mm [1-9/16 inch]:
black) x 2
·
Hexagonal wrench x 1
(Diagonal size: 6 mm [1/4 inch])
·
Operating instructions
(this document) x 1
·
C wrench x 1 (10 mm [3/8 inch])
Checking the Enclosed Parts
Check to make sure that you have all the enclosed parts before assembly and installation.
Operating instructions
Mode d'emploi
Manual de instrucciones
Table top stand
Support de couverture de table
Soporte de mesa
PDK-1012
4
En
Assembling the Stand
Installation screws 1
(M8 x 16 mm: silver)
Fully tighten the attachment screws.
2 Fully tighten the Installation screws (4
locations on the left and right).
Note
Always assemble it on a flat table etc.
Insert the screws in the holes vertically and do not tighten
them with more force than necessary.
Assembly Procedure
1 Secure the support column to the stand
with the Installation screws 1 (4 locations
on the left and right).
Using the enclosed hexagonal wrench, first loosely
attach the top attachment screw, then loosely attach
the bottom attachment screw.
5
En
English
Installation screws 2
(M8 x 30 mm: black)
Attaching the Plasma Display
The weight of a 50 inch plasma display is about 40 kg
(88 lbs), that of a 43 inch model is about 30 kg (66 lbs),
they have no depth, and are unstable. Therefore, at
least two people must assemble and install them.
Note
Be sure to install it on a flat stable location.
Insert the screws in the holes vertically and do not tighten
them with more force than necessary.
Make sure that you install the support columns reliably
according to the settings of the type of speakers you have
purchased with reference to the procedure in Assembling
the Stand.
Attachment Method
1 Attaching the plasma display to the stand.
Fit the stand's support columns to the bottom of the
plasma display as indicated by the arrows, then slowly
insert them vertically. Be extremely careful not to insert the
support columns of the stand into any part of the plasma
display other than the stand insertion slots. Note that doing
so might damage the plasma display panel or its ports or
result in the warping of the stand.
Line up the column
supports with the bottom
of the plasma display as
indicated in the accompa-
nying diagram.
2 Securing the plasma display with
Installation screws 2.
Secure them using the enclosed hexagonal wrench.
3 Securing the plasma display with
Installation screws 3.
Attach the plasma display at the points indicated by the
arrows using the enclosed hexagonal wrench.
Installation screws 3
(M8 x 40 mm: black)
4 Attaching the speakers.
Refer to the operating instructions for the speaker for
the installation method.
Caution