ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2008
KRP-SW01
ARP3512
T-ZZR AUG. 2008 Printerd in Japan
TABLE TOP STAND
KRP-SW01
/XZC1/WL5
External dimensions:
KRP-SW01 ............ 533 mm (W) × 339.4 mm (H) × 410 mm (D) (20-31/32 inch (W) × 13-3/8 inch (H) × 16-5/32 inch (D))
Weight:
KRP-SW01 ............ 10.7 kg (23.6 lbs)
· Table top stand × 1
· Bolt (AZB1573)
(M6 × 12 mm: black) × 4
[used to anchor the support columns and
the table top stand]
· Screw Assy (AZE1224)
· Bolt (AZB1572)
(M8 × 15 mm: black) × 2
· Bolt (AZB1575)
(M4 × 10 mm: black) × 2
· Bolt (AZB1571)
(M8 × 23 mm: black) × 2
· Hexagonal wrench × 1
(Diagonal size: 4 mm)
(AZE1223)
· Band × 2
(AZN2830)
· Cable Clamp × 1
(AZN2838)
· Prop Assy 50s × 2
(AZN2837)
· Operating Instructions × 1
(AZR1293)
1. SPECIFICATIONS
1.1 ACCESSORIES
1.2 SPECIFICATIONS
KRP-SW01 /SXZC/WL5
KRP-SW01 /XZC1/CN5
2
KRP-SW01
12
3
4
C
D
F
A
B
E
1
23
4
2. EXPLODED VIEWS AND PARTS LIST
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
2.1 PACKING
(3/4)
(4/4)
(2/4)
(1/4)
1
Support Assy
(for KRP-SW01/XZC1/WL5)
AZN2835
(for KRP-SW01/SXZC/WL5)
AZH2835
(for KRP-SW01/XZC1/CN5)
AZN2840
2
Packing Set
(for KRP-SW01/XZC1/WL5)
AZH1344
(for KRP-SW01/SXZC/WL5)
AZH1343
(for KRP-SW01/XZC1/CN5)
AZH1345
3
Prop Assy 50s
AZN2837
4
Cable Clamp
AZN2838
5
Band
AZN2830
6
1..Screw Assy
AZE1224
2..Bolt (M8 x 23 mm)
AZB1571
2..Bolt (M8 x 15 mm)
AZB1572
2..Bolt (M6 x 12 mm)
AZB1573
2..Bolt (M4 x 10 mm)
AZB1575
2..Hexagon Wrench (4 mm)
AZE1223
7
Operating Instructions
(for KRP-SW01/XZC1/WL5)
AZR1293
(for KRP-SW01/SXZC/WL5)
AZR1293
(Japanese/English/French/Spanish/
German/Italian/Dutch/Russian)
(for KRP-SW01/XZC1/CN5)
AZR1294
(Chinese)
PACKING Parts List
Mark No.
Description
Part No.
Mark No.
Description
Part No.
3
KRP-SW01
5
67
8
5
6
7
8
C
D
F
A
B
E
2.2 EXTERIOR
(Oval)
... Oval × 2
Leg :
... Rectangle × 7
(Oval)
Note :
· When tighten the screws to the metal part, tighten the screws tightly
by hand.
· When remove the Base cover Assy, remove all the screws of
.
1
Bolt (M6 x 16 mm)
AZB1574
2
Support Plate
AZE1222
3
Leg
AZE1225
4
Cushion (H24)
AZE1226
5
Swivel Cover
AZN2824
6
Base Cover Assy
AZN2834
7
Swivel Assy
(for KRP-SW01/XZC1/WL5)
AZN2836
(for KRP-SW01/SXZC/WL5)
AZH2836
(for KRP-SW01/XZC1/CN5)
AZN2841
8
Bolt (M4 x 10 mm)
AZB1577
9
Bolt (M6 x 12 mm)
AZB1578
EXTERIOR Parts List
Mark No.
Description
Part No.
Mark No.
Description
Part No.
4
KRP-SW01
12
3
4
C
D
F
A
B
E
1
23
4
3. SETTING
Bolt
(M8 × 23 mm: black)
Bolt
(M8 × 15 mm: black)
Line up the column
supports with the
bottom of the Pioneer
display and television as
indicated in the accompanying diagram.
Band
The larger holes
are on the front.
Bolt
(M6 × 12 mm: black)
1 Secure the support column to the stand with the
Installation bolts (4 locations on the left and right) .
Attach the band to the stand using attachment bolts.
2 Attaching the Pioneer display and television
to the stand.
3 Securing the Pioneer display and television
with Installation bolts.
4 Securing the Pioneer display and television
with Installation bolts.
Hold the Pioneer display
and television by its
handles and from the top.
Bolt
(M4 × 10 mm: black)