High power Cassette player with FM/MW/LW tuner
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 3
About this manual 3
In case of trouble 3
Protecting your unit from theft 3
Removing the front panel 3
Attaching the front panel 3
Head unit 4
Turning the unit on 5
Selecting a source 5
Turning the unit off 5
Listening to the radio 6
Storing and recalling broadcast
Tuning in strong signals 7
Storing the strongest broadcast
Playing a tape 8
Radio intercept 8
Introduction of audio adjustments 9
Using balance adjustment 9
Using the BTB (bass treble booster) 9
Adjusting BTB 10
Adjusting loudness 10
Adjusting source levels 10
Setting the clock 11
Turning the clock display on or off 11
Cassette player 12
Cassette tapes 12
Cleaning the playback head 12
About this unit
The tuner frequencies on this unit are allo-
cated for use in Europe, Asia, the Middle East,
Africa and Oceania. Use in other areas may re-
sult in improper reception.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this productspo-
tential and to maximize your listening enjoy-
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
! Keep this manual handy as a reference for
operating procedures and precautions.
! Always keep the volume low enough so you
can hear sounds outside of the car.
! Protect this product from moisture.
! If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Protecting your unit from
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
! Keep the front panel closed while driving.
! Never use force or grip the display and the
buttons tightly when removing or attaching.
! Avoid subjecting the front panel to excessive
! Keep the front panel out of direct sunlight and
Removing the front panel
1 Press DETACH to release the front
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3 Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against the
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
1 SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
2 RI button
Press to turn radio intercept on or off.
3 CLOCK button
Press to change to the clock display.
4 TAPE EJECT button
Press to eject a tape from your cassette
5 m/n buttons
Press to fast forward or rewind the tape.
6 LOCAL/BSM button
Press to turn local function on or off when
tuner is selected as a source.
Press and hold to turn BSM function on or
off when tuner is selected as a source.
7 BAND button
Press to select among three FM and MW/
LW bands and cancel the control mode of
8 BTB button
Press to select various BTB (bass treble
9 AUDIO button
Press to select various sound quality con-
a DETACH button
Press to remove the front panel from the
b 16 buttons
Press for preset tuning.
c c/d buttons
Press to do manual seek tuning. Also used
for controlling functions.
d LOUDNESS button
Press to turn loudness on or off.
e VOLUME button
Press to increase or decrease the
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source the unit is turned
Selecting a source
You can select a source you want to listen to.
To switch to the cassette player, load a cas-
sette tape in this unit (refer to page 8).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
! When no cassette is set in this unit, cassette
source will not change.
! When this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.
Turning the unit off
% Press SOURCE and hold until the unit