background image
1
<DRB1236>
En/Fr
EFX-500
EFFECTOR
BOITE D'EFFETS
EFFEKTGERÄT
REALIZZATORE DI EFFETTI
EFFECTOR
UNIDAD DE EFECTOS
Operating instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones


background image
2
<DRB1236>
En/Fr
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
IMPORTANT 1
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
This product complies with the Low Voltage Directive (73/
23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Thank you for purchasing this Pioneer product. Be sure
to read these operating instructions before using your
unit to prevent any damage that may result from im-
proper operation. Once you have finished reading the
instructions, place them in a safe place where they won't
become lost and can be easily accessed for future refer-
ence.
CONTENTS
BEFORE USE
FEATURES ............................................................. 3
QUICK OPERATION GUIDE ................................. 4
SOUND EFFECTS ................................................. 8
INSTALLATION GUIDELINES ............................ 11
CONNECTIONS .................................................. 12
NAMES OF PARTS AND FUNCTIONS ............. 14
OPERATIONS ................................................. 18
ADJUSTING INPUT LEVEL ................................ 18
ADJUSTING EFFECT OUTPUT LEVEL .............. 18
HEADPHONE MONITOR .................................... 19
ISOLATOR ........................................................... 19
BEAT EFFECT ...................................................... 20
DIGITAL JOG BREAK ......................................... 22
JOG MEMORY .................................................... 24
MIDI SETTINGS .................................................. 25
TROUBLESHOOTING AND
SPECIFICATIONS
TROUBLESHOOTING ......................................... 26
SPECIFICATIONS ................................................ 26
Ce produit est conforme à la directive relative aux appareils
basse tension (73/23/CEE), aux directives relatives à la
compatibilité électromagnétique (89/336/CEE, 92/31/CEE) et
à la directive CE relative aux marquages (93/68/CEE).
ATTENTION: AFIN DE PREVENIR TOUS RISQUES DE
CHOC ELECTRIQUE OU DE DEBUT D'INCENDIE, NE PAS
EXPOSER CET APPAREIL A L'HUMIDITE OU A LA PLUIE.
Nous vous remercions d'avoir fait l'achat de cet appareil
Pioneer. Veuillez lire attentivement ce mode d'emploi
avant d'utiliser votre appareil de manière à éviter de
l'endommager si toutefois son utilisation n'était pas
appropriée. Après avoir lu ces explications, rangez le
mode d'emploi dans un endroit sûr afin de ne pas l'égarer
et de pouvoir vous y référer facilement ultérieurement.
TABLE DES MATIÈRES
AVANT DE FAIRE USAGE DE
L'APPAREIL
CARACTÉRISTIQUES DOMINANTES ................. 3
GUIDE D'UTILISATION RAPIDE .......................... 6
EFFETS ACOUSTIQUES ...................................... 8
DIRECTIVES D'INSTALLATION ......................... 11
BRANCHEMENTS ............................................... 12
NOMENCLATURE DES COMMANDES ET
LEURS FONCTIONS ........................................... 14
MODES D'UTILISATION ............................ 18
RÉGLAGE DU NIVEAU D'ENTRÉE .................... 18
RÉGLAGE DU NIVEAU DE SORTIE
DES EFFETS ........................................................ 18
CONTRÔLEUR PAR CASQUE D'ÉCOUTE ........ 19
SÉPARATEUR ...................................................... 19
ÉTAGE D'EFFETS DE MESURE ......................... 20
COUPURE NUMÉRIQUE PAR MOLETTE
PAS-À-PAS .......................................................... 22
MÉMOIRE DE MOLETTE PAS-À-PAS ............... 24
RÉGLAGES MIDI ................................................. 25
GUIDE DE DÉPANNAGE ET FICHE
TECHNIQUE
GUIDE DE DÉPANNAGE .................................... 27
FICHE TECHNIQUE ............................................. 27


background image
3
<DRB1236>
En/Fr
FEATURES
7 3-band beat effector function
The highly acclaimed auto BPM counter/beat effect
in DJM-500 has been substantially improved. Effects
can now be applied only to the sound in the selected
band and be adjusted in time with the tempo (BPM)
of the tune. This provides greater means of expres-
sion than the previous effector that operated across
the entire band.
7 DIGITAL JOG BREAK function
The jog dial gives you real-time control over the
sound effects. Eight seconds of jog operation is
stored to allow replay. A total of 25 effects including
a beat effect are provided.
7 High-performance 3-band Isolator
Function [Fourth-order filter (­24 dB/
oct.)]
Level control is possible between +6 dB to ­
and a
separation of up to ­24 dB/oct. for each band ensure
accurate sound reproduction.
7 Input and Effect Out Peak Level Moni-
tor
Since both input and effect output levels can be visu-
ally assessed, precise level settings can be made with-
out any time loss.
7 MIDI In/Out Function
External MIDI signals (timing clock signals) make it pos-
sible to synchronize the beat effector and convert BPM
values that have been manually set or automatically
measured from the music to MIDI timing clock signals
to operate external sequencers or similar instruments.
7 High-quality Design
The effector uses 20-bit A/D, D/A (48 kHz sampling) con-
version and 24-bit DSP.
CARACTÉRISTIQUES
DOMINANTES
7 Fonction d'effets de mesure à 3 bandes
Le compteur de mesure BPM automatique / les effets
de mesure hautement acclamés dans la DJM-500 ont
été superbement améliorés. Les effets peuvent dès à
présent être appliqués uniquement au son dans la
bande sélectionnée et être ajustés en temps réel avec
la mesure (BPM) du morceau. Ceci permet de disposer
d'une plus grande marge d'expression en comparaison
de la boîte d'effets précédente qui agissait sur la totalité
de la bande.
7 Fonction de coupure numérique par
molette pas-à-pas DIGITAL JOG BREAK
La molette pas-à-pas vous permet de contrôler les effets
sonores en temps réel. Huit secondes de commande
de la molette pas-à-pas sont conservées en mémoire à
des fins de reproduction. Un nombre total de 25 effets
sont à votre disposition parmi lesquels un effet de
mesure.
7 Fonction séparateur à 3 bandes à hautes
performances filtre de quatrième ordre
(­24 dB / oct.)
La possibilité de réglage de niveau dans les limites de
+6 dB et ­
et une séparation jusqu'à ­ 24 dB / oct. sur
chaque bande permettent une reproduction précise des
sons.
7 Contrôleur des niveaux de crête d'entrée
et de sortie d'effets
Étant donné que les niveaux d'entrée et de sortie d'effets
peuvent être évalués plus facilement, un réglage plus
précis des niveaux peut être réalisé sans perte de temps.
7 Fonction d'entrée/sortie MIDI
Les signaux MIDI externes (signaux d'horloge de syn-
chronisation) permettent de synchroniser la boîte
d'effets de mesure et de convertir les valeurs BPM qui
ont été introduites manuellement ou mesurées
automatiquement à partir de la musique en signaux
d'horloge de synchronisation MIDI utilisés pour com-
mander des séquenceurs externes ou des instruments
de même type.
7 Une conception hautement raffinée
La boîte d'effets se sert d'une conversion 20 bits A-N,
N-A (échantillonnage de 48 kHz) et DSP 24 bits.
BLOCK DIAGRAM
INPUT
OUTPUT
PHONES
ISO-
LATOR
BEAT
EFFECT
DIGITAL
JOG
BREAK
DIAGRAMME SYNOPTIQUE
INPUT
OUTPUT
PHONES
ÉTAGE
SÉPARA-
TEUR
EFFET
DE
MESURE
COUPURE
NUMÉRIQUE
PAR
MOLETTE
PAS-À-PAS


background image
4
<DRB1236>
En/Fr
QUICK OPERATION GUIDE
ADJUSTING THE INPUT LEVEL
Input signals to the input terminal and turn
the INPUT LEVEL dial to the position right
before the "OVER" (red) indicator lights.
USING THE ISOLATOR
1. Use the three dials, LOW, MID and HI to set respective levels. (Each ­
setting
produces no sound.)
2. Press the ISOLATOR lever towards you (ON position) to start operation; release
it and it returns to the center position (OFF position). At the center position (OFF
position), the signal is output as is regardless of dial setting. Press the lever
away from you to lock it in position so that the isolator operates also when the
lever is released.
USING BEAT EFFECTS
1. Select BPM measurement mode.
Press the BPM MODE button to light an indica-
tor (AUTO, MIDI or TAP) on the indicator panel.
BPM Measurement Mode
Indicators
EFFECT TIME Display
BPM COUNTER
2. Select effect type.
Press the DELAY, ECHO, PAN, FLANGER or
TRANS button and the pressed button starts to
flash.
3. Select EFFECT FREQUENCY.
Press the button of the frequency (LOW, MID,
HI) you wish to affect by the beat effect and the
corresponding indicator lights.
4. Select the beat with which the effect
is to be synchronized.
Press a beat button (1/4, 1/2, 3/4, 1/1, 2/1 or 4/1)
to light the desired button.
5. Apply an effect.
Press the lever towards you (ON position) to start
operation; release it and it returns to the center
position (OFF position). In the center position
(OFF position), the original sound is not affected.
Press the lever away from you to lock it in posi-
tion so that the beat effect is applied also when
the lever is released.
TIME/BPM Dial
Set the desired effect time as in step 4.
Turn the TIME/BPM dial while holding down the
TAP/SHIFT button to make the desired BPM set-
ting. When also the BPM MODE button is held
down, BPM can be set in 0.1 increments.
TAP button
BPM can be manually adjusted by adjusting the beat
(quarter notes) and hitting this key two times or more.
MIX Dial
Sets the balance between the
original sound and effects.
DEPTH Dial
Sets the parameter of each ef-
fect.
4
<DRB1236>
En
OVER
INPUT LEVEL
MIN
MAX
MIX
ORIGINAL
EFFECT
DEPTH
BEAT
EFFECTS
MONITOR
MIN
MIN
MAX
MAX
OFF
ON
ON
LOCK
--
--
+6dB
+6dB
+6dB
ISOLATOR
LOW
MID
HI
mSec
AUTO
TAP
MIDI
BPM
EFFECT TIME
BPM COUNTER
DELAY
ECHO
PAN
FLANGER
LOW
MID
HI
TRANS
EFFECT FREQUENCY
OFF
ON
ON
LOCK
BPM
MODE
TAP / SHIFT
TIME/ BPM
B E
A T E F F E C T
S
1/1
2/1
4/1
3/4
1/2
1/4
--
ISOLATOR lever


background image
5
<DRB1236>
En/Fr
QUICK OPERATION GUIDE
ADJUSTING EFFECT
OUTPUT LEVEL
Turn the EFFECT OUT LEV dial to the posi-
tion right before the "OVER" (red) indica-
tor lights.
USING THE DIGITAL JOG BREAK
DIGITAL JOG BREAK METER
Indicates the amount of control exercised by the
Jog dial. (
\ pages 22 ~ 23)
1. Select the desired effect.
Press the desired effect button, JET, ZIP, WAH,
RING or FUZZ to flash the corresponding but-
ton.
2. Apply the desired effect.
Turn the Jog dial either while pressing the le-
ver towards you or pressing it away from you
(ON position). As the jog dial is turned, param-
eters change gradually and the selected effect
is applied. When the dial rotation is stopped,
the parameter returns to normal.
When the lever is pressed towards you, releas-
ing it causes it to automatically return to the
center (OFF position).
HOLD Button
When this button is pressed and is lit, the effect is
maintained when jog dial rotation is stopped.
Memory (M) Button/PLAY Button
Jog dial operation for up to 8 seconds can be stored
in memory by holding down the Memory (M) but-
ton during Jog dial operation. Jog dial operation
stored in the memory can be recalled with the PLAY
button.
DEPTH Dial
Sets the parameter of each effect.
(
\ pages 9~10, 23)
5
<DRB1236>
En
OVER
EFFECT OUT LEV
MIN
MAX
OFF
ON
ON
LOCK
100
0
80
10
60
20
40
30
20
40
0
50
20
60
40
70
60
80
80
90
100
100
DIGITAL JOG BREAK METER
JET
JOG MEMORY
ZIP
WAH
RING
FUZZ
DEPTH
DIGITAL
JOG BREAK
MIN
MAX
M
PLAY
HOLD
D
I G
I T A
L J O G B R
E A
K
OVER
INPUT LEVEL
MIN
MAX
MIX
ORIGINAL
EFFECT
DEPTH
BEAT
EFFECTS
DIGITAL
JOG BREAK
MONITOR
MIN
MIN
MAX
MAX
OVER
EFFECT OUT LEV
MIN
MAX
OFF
ON
ON
LOCK
OFF
ON
ON
LOCK
--
--
--
+6dB
+6dB
+6dB
ISOLATOR
LOW
MID
HI
mSec
AUTO
TAP
MIDI
BPM
EFFECT TIME
BPM COUNTER
100
0
80
10
60
20
40
30
20
40
0
50
20
60
40
70
60
80
80
90
100
100
DIGITAL JOG BREAK METER
DELAY
ECHO
PAN
FLANGER
LOW
MID
HI
TRANS
JET
ZIP
WAH
RING
FUZZ
EFFECT FREQUENCY
DEPTH
MIN
MAX
JOG MEMORY
M
PLAY
HOLD
OFF
ON
ON
LOCK
D
I G
I T A
L J O G B R
E A
K
BPM
MODE
TAP / SHIFT
TIME/ BPM
B E
A T E F F E C T S
1/1
2/1
4/1
3/4
1/2
1/4