background image
DVD PLAYER
DVD-V555
Operating Instructions


background image
Important
<VRB1210>
3
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
IMPORTANT
READ INSTRUCTIONS -- All the safety and operating
instructions should be read before the product is
operated.
RETAIN INSTRUCTIONS -- The safety and operating
instructions should be retained for future reference.
HEED WARNINGS -- All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS -- All operating and use
instructions should be followed.
CLEANING -- Unplug this product from the wall outlet
before cleaning. The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never clean
with furniture wax, benzine, insecticides or other
volatile liquids since they may corrode the cabinet.
ATTACHMENTS -- Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
WATER AND MOISTURE -- Do not use this product
near water -- for example, near a bathtub, wash
bowl, kitchen sink, or laundry tub; in a wet basement;
or near a swimming pool; and the like.
ACCESSORIES -- Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
CART -- A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
VENTILATION -- Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
POWER SOURCES -- This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
LOCATION ­ The appliance should be installed in a
stable location.
NONUSE PERIODS ­ The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
GROUNDING OR POLARIZATION
If this product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other), it will fit into the outlet only one way. This
is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
If this product is equipped with a three-wire
grounding type plug, a plug having a third (grounding)
pin, it will only fit into a grounding type power outlet.
This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
POWER-CORD PROTECTION -- Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the product.
OUTDOOR ANTENNA GROUNDING -- If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See Figure
A.
LIGHTNING -- For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES -- An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING -- Do not overload wall outlets,
extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY -- Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
SERVICING -- Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE -- Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into
the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance -- this indicates a need for service.
REPLACEMENT PARTS -- When replacement parts
are required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
SAFETY CHECK -- Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
WALL OR CEILING MOUNTING -- The product should
not be mounted to a wall or ceiling.
HEAT -- The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
IMPORTANT SAFETY INSTRUCTIONS
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
Fig. A
ANTENNA
LEAD IN
WIRE
NEC ­ NATIONAL ELECTRICAL CODE


background image
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
The use of optical instruments with this product will increase eye hazard.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the equipment and receiver.
­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV technician for help.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT NOTICE
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep it in a secure area. This is for your
security.
CAUTION: This product satisfies FCC regulations when
shielded cables and connectors are used to connect the
unit to other equipment. To prevent electromagnetic
interference with electric appliances such as radios and
televisions, use shielded cables and connectors for
connections.
THE POWER SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM
MAINS POWER IN STANDBY POSITION.
3
<VRB1210
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
¶ This player is not suitable for commercial use.
÷
÷


background image
<VRB1210>
4
See What You Can Do
See What You Can Do
1-1
5.41
SUBTITLE
OFF
AUDIO
1
ENGLIS
LINEAR PCM
Parental Level*
Lets you select a "parental level" (user restriction
level) to prevent children viewing undesirable
material.
Reserving a Desired Song*
Lets you play back selected titles and chapters
in any desired order.
Multi-Aspect*
You can select between Regular, Wide, and
Letter Box display formats.
Cinema Mode & Animation Mode*
Lets you select the ideal picture quality for
watching movies and animation movies.
Condition Memory*
The following settings of DVDs that you often
watch can be recorded, and recalled automatically.
· Multi Aspect
· Cinema Mode/Animation Mode
· Multi-Language Subtitles
· Multi-Language
· Position
Multilingual Subtitles*
You can select a desired subtitle language
when watching movies and other videos.
Multi-Angle*
Lets you view scenes
from different camera
angles.
Multiple Languages*
With discs that have multiple language soundtracks
recorded on them, you can select the desired language.
MENU
ENTER
TITLE MENU
1 TITLE1
2 TITLE2
3 TITLE3
4 TITLE4
5 TITLE5
1/5
MODE
CINEMA ANIMATION STANDARD
MENU
ENTER
PARENTAL
CURRENT LEVE · LEVEL8
CODE
0000
ENTER CODE NUMBER
TO CHANGE THE LEVEL.
HOLA
HELLO
AUDIO: 1
AUDIO: 2
* Indicates this feature may not be possible
with certain discs.
This product incorporates copyright
protection technology that is protected by
method claims of certain U. S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision
Corporation.
Reverse
engineering or disassembly is prohibited.
Dolby Digital*
Connect to a Digital
Surround Amplifier and
Surround Processor
for 5.1ch Dolby Digital
Surround
entertainment.
PBC Video CD Compatibility
Ready to play Video CDs
(Version 2.0) with PBC
(Play Back Control). Two
types
of
playback
possible depending on
the disc.
GUI Operation
While viewing Pioneer's original
GUI on-screen displays, you can
perform operations by remote
control. Even if there is no menu
recorded on a disc, you can still
perform GUI operation with the
menu provided by the player.
Last Memory Play*
If you stop watching a video part way through,
this lets you continue watching from the
same place later.
Still Frame*
You can view still frames.
Repeat Play*
Wide range of Repeat Play possibilities.


background image
5
<VRB1210>
Disc Types Compatible with This Unit
DVD, CD, CD-G Video
CD
Types of playable
discs and their marks
Diameter/Playable
sides
Playback time
12 cm (5in.)/
single-sided
12 cm (5in.)/
double-sided
1 layer
2 layer
1 layer
2 layer
DVD VIDEO*
DVD VIDEO*
Digital audio
Digital video
(MPEG 2)
133 min. (4.7 GB)
242 min. (8.5 GB)
266 min. (9.4 GB)
484 min. (17GB)
Digital audio
Digital video
(MPEG 2)
41 min.
75 min.
82 min.
150 min.
8 cm (3 in.)/
single-sided
8 cm (3 in.)/
double-sided
1 layer
2 layer
1 layer
2 layer
Disc Types Compatible with This Unit
Note
This player is DVD, CD, Video CD, and CD-G compatible.
The marks shown on the right are found on disc labels or on disc
jackets.
÷ This player can play all discs bearing the marks on the right
without the need for an adaptor.
÷ To prevent malfunction, do not use an 8 cm (3 in.) adaptor (for
CDs).
This unit is compatible with the NTSC TV system (U.S. and
Canadian TV system).
You cannot use discs other than those shown on the right.
* During DVD playback, data transfer is at 4.7 MBit per second.
Disc Table
Handling the discs
DVD VIDEO
VIDEO CD
12 cm (5 in.)/single-sided
Digital audio
Digital video
(MPEG 1)
Max. 74 minutes
VIDEO CD single
Digital audio
Digital video
(MPEG 1)
Max. 20 minutes
VIDEO CD
8 cm (3 in.)/single-sided
12 cm (5 in.)/
single-sided
8 cm (3 in.)/
single-sided
CD single
CD
Digital audio
Max. 74 minutes
Digital audio
Max. 20 minutes
CD
x You cannot play DVDs that do not bear the Region No.
(refer to "Terms" on page 69) indicated on the player's
rear panel.
Discs other than the ones indicated above can not be
played on this unit.
To avoid damage etc., do not play any discs other than those indicated
above.
Ex: DVD-Audio, DVD-ROM, CD-ROM, CD with special shape etc...
Holding with both
hands
Holding with one
hand
DVD Single, CD Single, Video CD Single
GRAPHICS