background image
En
Wireless USB Audio Transport
UWL-1
Instruction Manual
Thank you for purchasing the Onkyo Wireless
USB Audio Transport. Please read this manual
thoroughly before making any connections and
plugging it in.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new Wireless USB
Audio Transport.
Please retain this manual for future reference.
Contents
Package Contents ........................... 5
Features ........................................... 6
Getting to Know the UWL-1 ........... 7
Transmitter (UTX-1) ........................... 7
Receiver (RX-1) Front and Top .......... 7
Receiver (RX-1) Rear......................... 7
Getting Started................................ 8
System Requirements ............................. 8
Precautions for Using this Product .......... 8
Setting Up the UWL-1 ..................... 9
Connecting the Transmitter (UTX-1) ........ 9
Connecting the Receiver (RX-1)............ 10
Typical Hookup Example.................. 10
Connecting an Onkyo Component with
a DC Output (European Model).. 11
Changing the Receiver's ID ................... 11
Using the UWL-1 ........................... 12
Setting the Windows® Volume Control
Settings ...................................... 12
Listening to Music .................................. 13
Changing the Wireless Channel....... 14
Using Windows® Media Player.............. 14
Enabling CD Playback ........................... 15
Troubleshooting ............................ 16
Confirming Driver Installation ................ 18
Confirming the Audio Playback Device.. 19
Specifications ............................... 20


background image
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Unplug this apparatus during lightning storms or
when unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14. Damage Requiring Service
Unplug the apparatus from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is dam-
aged,
B. If liquid has been spilled, or objects have
fallen into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper adjust-
ment of other controls may result in damage
and will often require extensive work by a
qualified technician to restore the apparatus to
its normal operation,
E. If the apparatus has been dropped or damaged
in any way, and
F. When the apparatus exhibits a distinct change
in performance this indicates a need for ser-
vice.
15. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases shall be placed on the apparatus.
Don't put candles or other burning objects on top
of this unit.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS


background image
3
Precautions
1.
Recording Copyright--Unless it's for per-
sonal use only, recording copyrighted material
is illegal without the permission of the copy-
right holder.
2.
Care--Occasionally you should dust the unit
all over with a soft cloth. For stubborn stains,
use a soft cloth dampened with a weak solution
of mild detergent and water. Dry the unit
immediately afterwards with a clean cloth.
Don't use abrasive cloths, thinners, alcohol, or
other chemical solvents, because they may
damage the finish or remove the panel letter-
ing.
3.
Power
Pressing the [STANDBY/ON] button to select
Standby mode does not fully shutdown the
unit. If you do not intend to use the unit for an
extended period, remove the power cord from
the AC outlet.
4.
Never Touch this Unit with Wet Hands--
Never handle this unit or its power cord while
your hands are wet or damp. If water or any
other liquid gets inside this unit, have it
checked by your Onkyo dealer.
5.
Handling Notes
· If you need to transport this unit, use the
original packaging to pack it how it was
when you originally bought it.
· Do not leave rubber or plastic items on this
unit for a long time, because they may leave
marks on the case.
· This unit's top and rear panels may get
warm after prolonged use. This is normal.
· If you do not use this unit for a long time, it
may not work properly the next time you
turn it on, so be sure to use it occasionally.
For U.S. models
FCC Information for User
FCC WARNING
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTICE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
· Reorient or relocate the receiving antenna
· Increase the separation between the equipment
and receiver.
· Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
· Consult the dealer or an experienced radio/TV
technician for help.
FCC ID:
ATMUTX1
MODEL:
UTX-1
IC No.:
6547A-UTX1
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This transmitter must not be co-located or operated
in conjunction with any other antenna or transmit-
ter.


background image
4
Precautions--Continued
The available scientific evidence does not show that
any health problems are associated with using low
power wireless devices. There is no proof, however,
that these low power wireless devices are abso-
lutely safe. Low power Wireless devices emit low
levels of radio frequency energy (RF) in the micro-
wave range while being used. Whereas high levels
of RF can produce health effects (by heating tis-
sue), exposure to low-level RF that does not pro-
duce heating effects causes no known adverse
health effects. Many studies of low-level RF expo-
sures have not found any biological effects. Some
studies have suggested that some biological effects
might occur, but such findings have not been con-
firmed by additional research. UTX-1 has been
tested and found to comply with FCC radiation
exposure limits set forth for an uncontrolled equip-
ment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65.
For Canadian Models
(This device complies with Part 15 of FCC Rules
and RSS-Gen of IC Rules.) Operation is subject to
the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of this device.
The available scientific evidence does not show that
any health problems are associated with using low
power wireless devices. There is no proof, however,
that these low power wireless devices are abso-
lutely safe. Low power Wireless devices emit low
levels of radio frequency energy (RF) in the micro-
wave range while being used. Whereas high levels
of RF can produce health effects (by heating tis-
sue), exposure to low-level RF that does not pro-
duce heating effects causes no known adverse
health effects. Many studies of low-level RF expo-
sures have not found any biological effects. Some
studies have suggested that some biological effects
might occur, but such findings have not been con-
firmed by additional research. UTX-1 has been
tested and found to comply with IC radiation expo-
sure limits set forth for an uncontrolled equipment
and meets RSS-102 of the IC radio frequency (RF)
Exposure rules.
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
RSS-210, Low Power Licence-Exempt Radiocom-
munications Devices (All Frequency Bands)
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE
DE LA CLASSE B EST CONFORME À LA
NORME NMB-003 DU CANADA.
CNR-210, Dispositifs de radiocommunications de
faible puissance, exempts de licence (pour toutes
les bandes de fréquences)
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.


background image
5
Precautions--Continued
For European Models
We, the Onkyo hereby declare that this Wireless
USB Audio Transport, model UWL-1 is in compli-
ance with the essential requirements and other rele-
vant provisions of Directive 1999/5/EC and the
Electromagnetic Compatibility Directive 89/336/
EEC in accordance with the tests conducted to the
appropriate requirements of the relevant standards.
Package Contents
Make sure you have the following items.
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
GROEBENZELL, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
K. MIYAGI
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN 300 328 V1.6.1,
EN 301 489-1 V1.6.1, EN 301 489-17 V1.2.1, EN 60950-1,
EN 55022, EN 55024, EN 55013 and EN 55020.
Receiver (RX-1)
USB Transmitter (UTX-1)
AC adapter
Plug type varies from country to country.
Miniplug-to-RCA audio cable (1 m)
Dedicated DC power cable (1 m) (with
European model)
This cable is for connecting the Receiver to an
Onkyo component with a DC output. Don't use it
for any other purpose.
Optical digital audio cable
(with European model)
CD-ROM (UWL Assistant)
USB extension cable