English
TUNING
T-405TX
MEMORY
TIMER
PRESET
CHARACTER
DISPLAY
FM MODE
CLEAR
STANDBY/ ON
ACCUCLOCK
FM STEREO TUNER
BAND
TUNING
T-405TX
MEMORY
TIMER
PRESET
CHARACTER
DISPLAY
FM MODE
CLEAR
STANDBY/ ON
ACCUCLOCK
FM STEREO TUNER
Instruction Manual
FM Stereo Tuner
T-405TX
Befor
e
using
Connections
Operation
Other
Information
2
Thank you for purchasing ...
Before using
Main Features
· High-Quality Separate Component
· Preset Memory for Up to 30 Broadcast Stations
· Auto Preset Memory Function
· Weekly Program Timer
Thank you for purchasing the ONKYO T-405TX Tuner.
Please read this manual thoroughly before making any connection or turning on the power.
Follow these instructions to obtain optimum performance and maximum listening enjoyment from
your new Tuner. Please retain this manual for future reference.
Important Safeguards
1.
Read Instructions All the safety and
operating instructions should be read before
the appliance is operated.
2.
Retain Instructions The safety and
operating instructions should be retained for
future reference.
3.
Heed Warnings All warnings on the
appliance and in the operating instructions
should be adhered to.
4.
Follow Instructions All operating and use
instructions should be followed.
5.
Water and Moisture The appliance should
not be used near water for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.
6.
Carts and Stands The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
6A. An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
PORTABLE CART WARNING
S3125A
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK,
DO
NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO
NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing)
instructions
in
the
literature
accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
3
Befor
e
Using
Connections
Other
Information
Operation
Important Safeguards
7.
Wall or Ceiling Mounting The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
8.
Ventilation The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
9.
Heat The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
10. Power Sources The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
11. Polarization If the appliance is provided
with a polarized plug having one blade wider
than the other, please read the following
information: The polarization of the plug is a
safety feature. The polarized plug will only fit
the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is
still trouble, the user should seek the services
of a qualified electrician. Under no
circumstances should the user attempt to
defeat the polarization of the plug.
12. Power-Cord Protection Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning The appliance should be cleaned
only as recommended by the manufacturer.
14. Power Lines An outdoor antenna should
be located away from power lines.
15. Nonuse Periods The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
16. Object and Liquid Entry Care should be
taken so that objects do not fall and liquids
are not spilled into the enclosure through
openings.
17. Damage Requiring Service The appliance
should be serviced by qualified service
personnel when:
A. The power-supply cord or the plug has
been damaged; or
B. Objects have fallen, or liquid has been
spilled into the appliance; or
C. The appliance has been exposed to rain;
or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
18. Servicing The user should not attempt to
service the appliance beyond that described
in the operating instructions. All other
servicing should be referred to qualified
service personnel.
19. Outdoor Antenna Grounding If an
outside antenna is connected to the receiver,
be sure the antenna system is grounded so
as to provide some protection against voltage
surges and built up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See
Figure 1.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
S2898A
4
Precautions
1. Warranty Claim
You can find the serial number on the rear panel of
this unit. In case of warranty claim, please report this
number.
2. Care
From time to time you should wipe the front and
rear panels and the cabinet with a soft cloth. For
heavier dirt, dampen a soft cloth in a weak solution
of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with
a clean cloth. Do not use rough material, thinners,
alcohol or other chemical solvents or cloths since
these could damage the finish or remove the panel
lettering.
3. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit will
be used meets the required voltage (e.g., AC 230 V,
50 Hz or AC 120 V, 60 Hz) written on the rear panel.
Setting the STANDBY button to standby does not
shut off the power completely. So the power cord
should be removed from the AC outlet when the
unit is not used for a prolonged time.
For British model
Replacement and mounting of an AC plug on the
power supply cord of this unit should be performed
only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue
: Neutral
Brown : Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should the fuse
need to be replaced, please ensure that the
replacement fuse has a rating of 5 amperes and that it
is approved by ASTA or BSI to BS1362. Check for the
ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A DANGER
OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET.
If in any doubt, please consult a qualified electrician.
For U.S. model
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC,
ANSI/NFPA 70, which provides guidelines for proper
grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system
of the building, as close to the point of cable entry
as practical.
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment
and receiver.
· Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
· Consult the dealer or an experienced radio/TV
technician for help.
For Canadian model
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU'AU FOND.
5
Table of contents
Befor
e
Using
Supplied accessories
Check that the following accessories are supplied with this unit.
Audio connection cable
× 1
remote control cable
× 1
FM indoor antenna
× 1
(not available on the U.S. and Cnadian models)
AM loop antenna
× 1
(only available on the U.S. and Canadian models)
T-shaped FM indoor antenna
× 1
(only available on the U.S. and Canadian models)
Connections
Connecting to the ONKYO Separate Collection Series Components ................ 6
Connecting to other components ................................................................... 8
Antenna connections .................................................................................... 10
Operation
Setting the Clock .......................................................................................... 12
Receiving stations ......................................................................................... 16
Naming a preset station ................................................................................ 19
Receiving RDS (European models only) .......................................................... 22
Using the timer ............................................................................................. 23
Other Information
Troubleshooting ............................................................................................ 30
Index to parts and controls ............................................................................ 31
Specifications ................................................................................................ 32
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
A.HORIUCHI
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
Memory Preservation
This unit does not require memory preservation batteries.
A built-in memory power back-up system preserves the
contents of the memory during power failures and even
when the unit is unplugged. The unit must be plugged
in order to charge the back-up system.
The memory preservation period after the unit has been
unplugged varies depending on climate and placement
of the unit. On the average, memory contents are
protected over a period of a few weeks after the last
time the unit has been unplugged. This period is shorter
when the unit is exposed to a highly humid climate.