background image
En
Remote Interactive Dock
DS-A2
Instruction Manual
Contents
Important Safety Instructions . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . 4
About the RI Dock . . . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package Contents . . . . . . . . . . . . . . . . . . . . 4
Compatible iPods . . . . . . . . . . . . . . . . . . . . . 4
Getting to Know the RI Dock . . . . . . . . . . 5
Remote Controller . . . . . . . . . . . . . . . . . . . . 6
Hooking Up the RI Dock. . . . . . . . . . . . . . . 8
Using the RI Dock. . . . . . . . . . . . . . . . . . . . 9
Setting the OSD Mode . . . . . . . . . . . . . . . . 9
Controlling Your iPod without the OSD . 9
Controlling Your iPod with the OSD . . . 9
TV Display Settings . . . . . . . . . . . . . . . . . .11
Setting the TV System. . . . . . . . . . . . . . . .11
Other Functions . . . . . . . . . . . . . . . . . . . . .11
Setting the Remote Controller's ID . . .12
Using Your Amp's Remote Controller .13
Troubleshooting . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . 15
Thank you for purchasing an Onkyo product.
Please read this manual carefully before making
any connections or using this product. By follow-
ing these instructions, you'll get the best audio
performance and the most listening pleasure
from your Onkyo product. Keep this manual for
future reference.
DS-A2_En.book Page 1 Friday, July 7, 2006 9:24 AM


background image
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instruc-
tions.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Unplug this apparatus during lightning storms
or when unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-sup-
ply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been
dropped.
14. Damage Requiring Service
Unplug the apparatus from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is dam-
aged,
B. If liquid has been spilled, or objects have
fallen into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
apparatus to its normal operation,
E. If the apparatus has been dropped or dam-
aged in any way, and
F. When the apparatus exhibits a distinct
change in performance this indicates a need
for service.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance
(servicing)
instructions
in
the
literature
accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
DS-A2_En.book Page 2 Friday, July 7, 2006 9:24 AM


background image
3
Precautions
1.
Recording Copyright--Unless it's for personal
use only, recording copyrighted material is ille-
gal without the permission of the copyright
holder.
2.
Care--Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a
soft cloth dampened with a weak solution of
mild detergent and water. Dry the unit immedi-
ately afterwards with a clean cloth. Don't use
abrasive cloths, thinners, alcohol, or other chem-
ical solvents, because they may damage the fin-
ish or remove the panel lettering.
3.
Never Touch this Unit with Wet Hands--Never
handle this unit or its power cord while your
hands are wet or damp. If water or any other liq-
uid gets inside this unit, have it checked by your
Onkyo dealer.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the equip-
ment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates,uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
·Reorient or relocate the receiving antenna.
· Increase the separation between the equipment
and receiver.
·Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
·Consult the dealer or an experienced radio/TV
technician for help.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 DU
CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.
For some models
Before use, connect the appropriate AC plug adapter
to the AC adapter.
The type of plug adapter depends on the place of
purchase.
For European Models
Disconnect
Connect
Notch
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
GROEBENZELL, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
K. MIYAGI
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding
technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
DS-A2_En.book Page 3 Friday, July 7, 2006 9:24 AM


background image
4
Getting Started
With the Onkyo RI Dock, you can easily play the
music stored on your Apple* iPod* through
your Onkyo audio system and enjoy great
sound, and watch iPod slideshows and videos
on your TV. In addition, the onscreen display
(OSD) allows you to view, navigate, and select
your iPod's playlists (artists, albums, songs,
genres, composers) on your TV, and with the
supplied remote controller, you can control
your iPod from the comfort of your sofa. You
can even use your Onkyo amp's remote control-
ler to operate your iPod.
, which stands for Remote Interactive, is an
exclusive Onkyo control system that allows all
-capable Onkyo audio components to be
turned on or off together, and your amp to turn
on automatically and select the appropriate
input source when playback is started on a
source component. It also allows you to control
your iPod with your amp's remote controller.
In this manual, the DS-A2 Remote Interactive
Dock is referred to as the "RI Dock."
Play your iPod music through your Onkyo
audio system and enjoy great sound
View, navigate, and select your iPod's
playlists (artists, albums, songs, genres,
composers) on your TV
Control your iPod from the comfort of
your sofa with the supplied remote con-
troller
Watch iPod videos and slideshows on your
TV
Supports all iPods with a dock connector,
including the iPod mini, iPod photo, and
iPod nano
Charges your iPod's battery while you
enjoy your music
For the latest information on the RI Dock, see
the Onkyo Web site at: www.onkyo.com
* Apple and iPod are trademarks of Apple Computer, Inc., reg-
istered in the U.S. and other countries.
Make sure you have the following items:
Made for:
·
iPod photo (software 1.2.1 or later)
·
iPod mini (software 1.4.1 or later)
·
iPod nano (software 1.1.1 or later)
·
5th Generation iPod with video
(software 1.1.1 or later)
·
4th Generation iPod with Click Wheel
(software 3.1.1 or later)
·
3rd Generation iPod with touch wheel
and buttons
(software 2.3 or later)
About the RI Dock
Features
Package Contents
Compatible iPods
· DS-A2 Remote Interactive Dock
· Remote controller
· AC adapter
· AV cable
·
cable
· Button-type battery
(CR 2025)
· Instruction manual
Note:
·Before using the RI Dock, update your
iPod with the latest software, available
from the Apple Web site at:
www.apple.com
DS-A2_En.book Page 4 Friday, July 7, 2006 9:24 AM


background image
5
Getting Started--Continued
Adjusting the iPod Adaptor
The iPod adapter needs to be adjusted to match your partic-
ular iPod. Insert your iPod into the RI Dock. If there's a gap
between the back of your iPod and the adapter, turn the
adapter counterclockwise to close the gap. Turning the
adapter counterclockwise moves it forward. Turning it clock-
wise moves it backward.
Getting to Know the RI Dock
CD-R
HDD/DOCK
TAPE
TAPE
MD
TAPE
DOCK
MD
CD-R
HDD/DOCK
MD
TAPE
MD
CDR
MD
CD-R
TAPE
HDD/DOCK
CDR
HDD/DOCK
or
MD
CD-R
TAPE
HDD/DOCK
HDD
iPod slot
Dock connector
Remote control
sensor
RI MODE switch
jack
VIDEO OUT jack
DC IN 12V 1A jack
AUDIO OUT L/R jacks
Set it to match your amp's
input display (see below).
Amp input
display
RI MODE switch
See your amp's instruction manual for details on changing the
input display. On some amps, you press and hold the [TAPE] but-
ton to change the input display from TAPE to MD or CDR.
To control your iPod with your amp's
remote controller, select the matching
remote control mode.
Amp remote
controller's mode
iPod adapter
Forward
Backward
DS-A2_En.book Page 5 Friday, July 7, 2006 9:24 AM