Thank you for purchasing the Integra Compact Disc
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new Compact Disc Changer.
Please retain this manual for future reference.
Compact Disc Changer
Important Safeguards ................. 2
Precautions ................................... 3
Features ........................................ 4
Control Positions and Names...... 5
Supplied accessories ................... 5
Remote Controller ....................... 6
System Connections .................... 7
Playing CDs .................................. 8
Using Memory Functions ........... 14
Troubleshooting Guide .............. 16
Specifications ............................. 16
09/05/2000, 4:23 PM
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated"dangerous voltage"within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (ser vicing) instructions in the literature
accompanying the appliance.
1. Read Instructions All the safety and operating
instructions should be read before the appliance is
2. Retain Instructions The safety and operating
instructions should be retained for future reference.
3. Heed Warnings All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions All operating and use instructions
should be followed.
5. Water and Moisture The appliance should not be used
near water for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands The appliance should be used only
with a cart or stand that is
6A.An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
7. Wall or Ceiling Mounting The appliance should be
mounted to a wall or ceiling only as recommended
by the manufacturer.
8. Ventilation The appliance should be situated so that
its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or if placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings,
there should be free space of at least 5 cm (2 in.) and
an opening behind the appliance.
9. Heat The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
10. Power Sources The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
11. Polarization If the appliance is provided with a
polarized plug having one blade wider than the other,
please read the following information:
The polarization of the plug is a safety feature. The
polarized plug will only fit the outlet one way.If the plug
does not fit fully into the outlet, try reversing it. If there is
still trouble, the user should seek the services of a
qualified electrician. Under no circumstances should
the user attempt to defeat the polarization of the plug.
12. Power-Cord Protection Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, espe-
cially near plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Cleaning The appliance should be cleaned only as
recommended by the manufacturer.
14. Nonuse Periods The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
15. Object and Liquid Entry Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
16. Damage Requiring Service The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been dam-
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
17. Servicing The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
PORTABLE CART WARNING
This unit contains a semiconductor laser system and is
classified as a "CLASS 1 LASER PRODUCT". So, to use this
model properly, read this Instruction Manual carefully. In
case of any trouble, please contact the store where you
purchased the unit.To prevent being exposed to the laser
beam, do not try to open the enclosure.
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
09/05/2000, 4:23 PM
For U.S. model
The laser is covered by a housing which prevents expo-
sure during operation or maintenance. However,this prod-
uct is classified as a Laser Product by CDRH (Center for
Devices and Radiological Health) which is a department
of the Food and Drug Administration. According to their
regulations 21 CFR section 1002.30, all manufactures who
sell Laser Products must maintain records of written com-
munications between the manufacturer,dealers and cus-
tomers concerning radiation safety. If you have any com-
plaints about instructions or explanations affecting the use
of this product, please feel free to write to the address on
the back page of this manual. When you write us, please
include the model number and serial number of your unit.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indi-
cated on the rear panel.
FCC INFORMATION FOR USER
The user changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate ra-
dio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and
· Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV tech-
nician for help.
For Canadian model
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B
EST CONFORME À LA NORME NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS
LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
This CD changer can play back the following discs.
You cannot play back discs other than those listed above.
Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the internal mecha-
nism of the CD changer.
Do not use discs on which adhesive from adhesive tape
or a disc label (if it is a rental disc) remains. Otherwise, you
may not be able to eject the discs or the CD changer
may become inoperative.
AAA AAA AA AAAAA
AA AA AA
AAA AAAA AA
AA AA AAA AA AAA A
AAA AA AA AA
AAA AAA AA AAAAA
AA AA AA
AAA AAAA AA
AA AA AAA AA AAA A
AAA AA AA AA
Disc mark Contents
09/05/2000, 4:23 PM
1. Warranty Claim
You can find serial number on the rear panel of this unit. In
case of warranty claim, please report this number.
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ
THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs accord-
ing to country or region. Be sure that the power supply
voltage of the area where this unit will be used meets the
required voltage (e.g., AC 120 V, 60 Hz) written on the rear
3. Do not touch this unit with wet hands
Do not handle this unit or power cord when your hands
are wet or damp. If water or any other liquid enters the
case, take this unit to an authorized service center for in-
4. Location of this unit
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all
sides of this unit especially when it is placed in an audio
rack. If ventilation is blocked, this unit may overheat and
Do not expose this unit to direct sunlight or heating units
as this unit's internal temperature may rise and shorten
the life of the pickup.
Avoid damp and dusty places and places directly af-
fected by vibrations from the speakers. In particular, avoid
placing the unit on or above one of the speakers.
Be sure this unit is placed in a horizontal position. Never
place it on its side or on a slanted surface as it may mal-
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause reception
interference resulting in some noise in the TV or tuner out-
From time to time you should wipe the front and rear pan-
els and the cabinet with a soft cloth. For heavier dirt,
dampen a soft cloth in a weak solution of mild detergent
and water, wring it out dry, and wipe off the dirt. Following
this, dry immediately with a clean cloth.
Do not use rough material,thinners,alcohol or other chemi-
cal solvents or cloths since these could damage the finish
or remove the panel lettering.
6. Points to remember
If this unit is brought from a cold environment to a warm
one or is in a cold room that is quickly heated, condensa-
tion may form on the pickup, preventing proper opera-
tion. In this case, remove the disc and leave the power
ON for about one hour to remove the condensation.
When transporting this unit, be careful not to bump it.
Always close the disc tray when not loading or unloading
discs to protect delicate internal parts from dust.
s 6-disc carousel changer
s Up to five discs to be changed without interrupting disc
s Next Selection function allows next track or disc to be
selected without interrupting current track playing
s Single-bit PWM (Pulse Width Modulation) D/A converter
minimizes low-level linearity errors, eliminating loss of
detail during quiet passages
s Proprietary AccuPulse Quartz system with Polysorb vir-
tually eliminates the possibility of clock-oscillator tim-
s 8-times oversampling
s Fixed analog output
s Display visible even when disc tray is out
s Oversized power transformer
s 6-mode repeat: Entire disc, All discs, Random tracks,
Programmed tracks, Random memory, Single track
s 3-mode time display: Elapse, Remain, and Total Re-
compatible remote control
s Disc Intro Scan function plays the first eight seconds of
s Direct track or disc access via the remote controller
s Optical digital output for direct connection to a DAT,
MD, or DSP receiver
This unit does not require memory preservation batter-
ies. A built-in memory power back-up system preserves
the contents of memory during power failures and even
when the Power button is set to Off.
The Power button must be set to On in order to charge
the back-up system. The memory preservation period
after the unit has been turned off varies depending on
climate and placement of the unit. On average,
memory contents are protected over a period of a few
weeks after the time the unit has been turned off. This
period is shorter when the unit is exposed to a very hu-
09/05/2000, 4:23 PM
PAUSE REPEAT RANDOM MEMORY
Five CD Exchange Continuous Play
Control Positions and Names
· If there is a protective film on the surface of the display that makes it difficult to read the display, remove it.
· For more information about the buttons and knobs, refer to the pages listed in the brackets ( [ ] ) below.
12. Loading drawer
14. Disc trays
15. Disc Skip buttons 
16. Direct play buttons
(Disc 1-Disc 6) [10, 12, 14]
17. Random button 
18. Repeat button 
19. Search/Skip buttons
) [9~12, 14, 15]
a. PAUSE indicator
b. REPEAT indicator
c. RANDOM indicator
d. MEMORY indicator
e. NEXT indicator
f. Disc number indicator
g. TRACK number indicator
h. ELAPSED/REMAIN indicators
i. Time display
1. Power button 
2. Display button 
3. Next Selection button 
4. Remote control sensor 
6. Open/Close button 
7. Pause button 
8. Stop button [9, 11]
9. Play button [8~10, 13, 14]
10. Memory button [14, 15]
11. Clear button 
Check that the following accessories are supplied with this unit.
Audio connection cable x 1
cable x 1
Remote controller (RC-435C) x 1
Batteries (size AA, R6 or UM-3) x 2
Power cable x 1
09/05/2000, 4:24 PM