background image
© B62-1976-20 (K)
09 08 07 06 05 04 03 02
UHF FM TRANSCEIVER
TK-3230
INSTRUCTIoN MANUAl


background image
Thank You
We are grateful for your purchase of this Kenwood product and
welcome you to the Business Radio Service (BRS). Your
Kenwood
2-way Business Radio is called a "transceiver",
meaning "transmitter & receiver". We believe this easy-to-use
transceiver will provide you with dependable and reliable
communications. This Kenwood transceiver is a precision device.
Treat it with care, and you will enjoy years of reliable operation.
FeaTures
· Lightweight and compact design using a lithium-ion battery pack,
with a sturdy, polycarbonate body and a spring-loaded belt clip.
· 122 tone/code settings for each channel, allowing you to ignore
unwanted calls.
· Privacy Talk scrambles all your voice messages, giving you
complete privacy for your conversations.
· FleetSync operation, allowing a variety of call types.
· Automatic battery power saver, providing you with longer battery
usage.
· Battery power level indicator with low battery power warning.
· Key lock and Super Lock prevent you from accidentally changing
your transceiver settings.
· Ten different calling alert tones allows you to identify yourself to
your group before you begin speaking.
· Hands free operation when using an optional headset.
operaTing CondiTions
Open locations (no obstructions)
Up to 5 miles (8 km)
Residential areas (near buildings)
Up to 1.5 miles (2.4 km)
In steel/ concrete reinforced buildings Up to 225,000 ft2 (20,900 m2)
In high rises
Up to 17 floors
Note:
The listed ranges are based on field testing and may vary
with your operating conditions.


background image
FCC LiCense inFormaTion
Your Kenwood radio operates on communications frequencies
which are subject to FCC (Federal Communications
Commission) Rules & Regulations. FCC Rules require that all
operators using Private Land Mobile radio frequencies obtain a
radio license before operating their equipment. Application for
license must be made on FCC form 601.
FAX:
Forms can be obtained by fax from the FCC
Fax-On-Demand system. Call 1-202-418-0177 from your
fax machine to request the documents.
MAIL:
Forms can be ordered by telephone, and will be sent to
you by first class mail. Call the FCC Forms Hotline at
1-800-418-FORM (1-800-418-3676).
INTERNET:
Form 601 and instructions can be downloaded
from the FCC Forms website at:
http://www.fcc.gov/formpage.html
Before filling out your Form 601 application Technical Data
section, you must decide which frequency (or frequencies) you
will operate on. Refer to the frequency chart on page 54.
Questons?
Call the FCC for license application questions at
1-888-CALL-FCC (1-888-225-5322).
ChanneL spaCing
The ProTalkxls uses 12.5 kHz channel spacing, as per the
regulations of the FCC. Transceivers using 12.5 kHz channel
spacing may not have optimal sound quality when used with
transceivers using 25 kHz channel spacing.


background image
noTiCes To The user
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
One or more of the following statements may be applicable:
FCC WARNING
This equipment generates or uses radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if
an unauthorized change or modification is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can generate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer for technical assistance.


background image
v
SAFETY INFORMATION:
Your wireless hand-held portable transceiver has been designed using
a low power transmitter.
When the PTT switch is pressed, the transceiver generates radio
frequency (RF) electromagnetic energy (EME).
This transceiver is designed to comply with the FCC Report and Order
FCC 96-326 (August, 1996).
· Do not transmit for more than 50% of the total operating time.
Transmitting for over 50% of the operating time may exceed
the FCC RF exposure compliance requirements. Transmission
occurs while you are pressing the PTT switch and is confirmed by
the LED that lights red while transmitting.
· To transmit, speak into the speaker area in your normal voice
while holding the transceiver upright and keep the antenna at
least 2 inches (5 cm) from your head and body.
· When using a headset, ensure that the antenna is at least
2 inches (5 cm) away from your body whenever you are
transmitting.
· Use only Kenwood genuine accessories. Unauthorized
modifications, or attachments may damage the transceiver and
violate FCC rules and regulations.
ATTENTION (U.S.A. Only):
The RBRC Recycle seal found on Kenwood
lithium-ion (Li-ion) battery packs indicates
Kenwood
's voluntary participation in an industry
program to collect and recycle Li-ion batteries
after their operating life has expired. The RBRC
program is an alternative to disposing Li-ion
batteries with your regular refuse or in municipal
waste streams, which is illegal in some areas.
For information on Li-ion battery recycling in your area, call (toll free)
1-800-8-BATTERY (1-800-822-8837).
Kenwood
's involvement in this program is part of our commitment to
preserve our environment and conserve our natural resources.