background image
FR
ANÇ
AIS
DEUT
SCH
NEDERLANDS
IT
ALIANO
ESP
AÑOL
ENGLISH
© B60-5674-10/01 (E) (0707)
SLG-7
INSTRUCTION MANUAL
DIGITAL WIRELESS SYSTEM
Declaration of Conformity with regard to the
R&TTE Directive 1999/5/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Hereby, Kenwood declares that this unit SLG-7 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.


background image
English
2
Safety precautions
¤ Caution:
Read this page carefully to ensure safe operation.
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions ­ All the safety and operating instructions should be read before
the product is operated.
Retain Instructions ­ The safety and operating instructions should be retained for
future reference.
Heed Warnings ­ All warnings on the product and in the operating instructions
should be adhered to.
Follow Instructions ­ All operating and use instructions should be followed.
1.
Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2.
Attachments ­ Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
3.
Water and Moisture ­ This product shall not be exposed to dripping and
splashing ­ for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like. Do not place an
object containing liquid, such as a flower vase, on the appliance.
4.
Accessories ­ Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended by
the manufacturer. Any mounting of the product should follow the
manufacturer's instructions, and should use a mounting accessory recommended
by the manufacturer. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart
combination to overturn.


background image
English
3
5.
Ventilation ­ Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
6.
Power Sources ­ This product should be operated only from the type of power
source indicated on the product. If you are not sure of the type of power supply to
your home, consult your product dealer or local power company.
7.
Power Cord Protection ­ Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
8.
Lightning ­ For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
9.
Overloading ­ Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
10. Object and Liquid Entry ­ Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product.
11. Servicing ­ Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
12. Damage Requiring Service ­ Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
a)
When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c)
If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating
instructions.
e)
If the product has been dropped or damaged in any way, and
f)
When the product exhibits a distinct change in performance ­ this indicates a
need for service.
g) If an abnormal smell or smoke is detected.


background image
English
4
Safety precautions
13. Replacement Parts ­ When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
14. Safety Check ­ Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine that the product
is in proper operating condition.
15. Wall or Ceiling Mounting ­This product should be mounted to a wall or ceiling
only as recommended by the manufacturer.
16. Heat ­ This product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products that produce heat. Do not place a flaming
object, such as a candle or lantern, or near the product.
17. Power Lines ­ An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
18. Do notusethisproductifyoucarryacardiacpacemakeronyou ­ Otherwise,
the radio frequency energy may affect the operation of the pacemaker.
19. Do not use this product in a medical facility such as a hospital, near
medical electronic equipment or in an aircraft ­ Otherwise, the radio
frequency energy may cause a malfunction or accident.


background image
English
5
÷ The radio wave transmission range is an unobstructed distance of about 30 meters
between the Transmitter and the Receiver. If a reinforced concrete or metallic wall is located
between the Transmitter and the Receiver, the radio waves are blocked and the music may
be interrupted or stopped. Note that the transmission range may decrease depending on
the operating environment.
÷ If this product is used in proximity of the following type of electronic equipment, radio
wave interference may cause problems such as a malfunction or noise.
- Equipment using the 2.4 GHz band frequency, such as a wireless LAN, microwave oven,
digital cordless phone or Bluetooth device. The audio may be interrupted due to radio
wave interference.
- AV equipment with an antenna input terminal, such as a radio, TV, video recorder or CS
tuner. The audio and video may be interfered with by noise.
÷ The radio waves emitted from this product may be tapped by a third party. Do not use this
product for important communications or communications with which human life is in
question.
Maintenance
When this product gets dirty, wipe it with a soft, dry cloth. Do not use lacquer thinner,
benzene or alcohol as these substances may discolor the finish.
Notes on Radio Waves