background image
KTC-V800N
KTC-V800P
TV TUNER UNIT
INSTRUCTION MANUAL
© PRINTED IN JAPAN B64-1712-10 (M/H) (DT)


background image
System Setup Function
2
You can use the FM transmitter function to hear the sound of the TV, video from
your car FM radio.
Press the SCRN button for at least one second to switch to the setup menu screen.
Touch [ SYSTEM ] to switch to the system setting screen-1.
Touch [
3 ] to switch to the system setting screen-2.
FM Transmitter Function On and Off
Touch the [ ON ] or [ OFF ] to switch the FM
transmitter function on and off.
[ON] : FM transmitter function is turned on
[OFF]: FM transmitter function is turned off
Adjusting the FM Transmitter Frequency
When the FM transmitter function is turned on,
you can switch the transmission frequency (87.5
MHz to 89.9 MHz) as follows:
Touch the [
3 ] to increase the frequency by 0.1 MHz step.
Touch the [
2 ] to decrease the frequency by 0.1 MHz step.
· Be sure to select a frequency that is not the same as a broadcast station in your area.
· The "Auto Seek" function on your car radio may not stop at the FM transmitter
frequency. In this case, use the "Manual Seek" function to set the radio to the FM
transmitter frequency.
NOTE
3
2
1
FM Transmitter Function [FM-TX]
PWR
V.SEL
MODE
­
+
SCRN
Phone Jack (Ø3.5)
RTN
FM - T X
SYS
E M
T
87 . 5 MHz
FM - T X
ON
O F F
BEEP
OF F
ON
Please refer to the LZ-800W instruction manual for how to use the system
setting screen display and for details on other function settings.
System setting screen-2


background image
3
Securing to audio board
Securing to pile carpet
(Provided with the LZ-800W)
Please do not install the unit near the dashboard, the rear tray, or other important
components. Doing so could lead to injury or accident should the unit come off due to a
shock and strike a person or an important component.
Tapping screws(Provided with the LZ-800W) should be used for mounting. (Attachment with
velcro strips, although easy, can come off with a shock.)
2CAUTION
Installation the TV Tuner Unit
(Provided with the LZ-800W)
(Provided with the LZ-800W)
(Accessory D)
Arracher les bandes de protection des bandes velcro, les attacher au bas de l'unité de
dissimulation, et fixer à la moquette.
Accessories
External view
......... Number of items
External view
......... Number of items
A
C
A
R
D
IV
E
R
S
IT
Y
A
N
T
E
N
N
A
W
IT
H
B
O
O
S
T
E
R
C
X
-A
3
3
0
O
N
O
F
F
B
O
O
S
T
C
A
R
D
IV
E
R
S
IT
Y
A
N
T
E
N
N
A
W
IT
H
B
O
O
S
T
E
R
C
X
-A
3
3
0
O
N
O
F
F
B
O
O
S
T
........2
C
........6
D
........2
B
........1
Installation


background image
Installation
4
Connecting the TV Tuner Unit
CAR
DIVERSITY
ANTENNA
WITH
BOOSTER
CX-A330
ON
OFF
BOOST
CAR
DIVERSITY
ANTENNA
WITH
BOOSTER
CX-A330
ON
OFF
BOOST
FM-TX
(Provided with the LZ-800W)
Monitor Unit (LZ-800W)
TV Tuner Unit (KTC-V800N/P)
TV Antenna Unit (Accessory A)
See the LZ-800W instruction manual for details regarding the power harness
and Video Input/Video Output terminals.
(Provided with the LZ-800W)
Extend the antenna cord and locate
in an area where reception is not
marred by excessive noise.
2CAUTION
FM transmitter antenna cord


background image
5
Connecting the Antenna Units
CAR
DIVERSITY
ANTENNA
WITH
BOOSTER
CX-A330
ON
OFF
BOOST
­
+
Booster switch
· Set this booster switch to "OFF" if there
is ghosting of the on-screen image due to
electromagnetic fields.
·Please set the booster switch to the
"ON" position in case of a weaken field
area.
OFF
ON
To the TV tuner unit
Ignition cable (Red)
ª12V
Ignition key switch
Car fuse box
(Main fuse)
ACC
Ground cable (Black)
· (To car chassis)
Battery
Incar antennas have a lower reception sensitivity than antennas intended for outside mounting. The
picture may not appear or may be disturbed if the signal in your area is weak.
2 CAUTION
Fuse(1A)