background image
SPEAKER SYSTEM
KS-708HT
SERVICE MANUAL
2004-5 PRINTED IN KOREA
B51-5900-00 (Z/K) 153
Front
Center
Surround
System
2 way 3 speaker system
Enclosure
Acoustic air suspension type
Loudspeaker
Woofer
70 mm (2-3/4") cone type X 2
Tweeter
1.9 mm (3/4") dome type
Nominal Impedance
8
Maximum Input Power
80 W
Frequency Response
110 - 40,000 Hz
Sensitivity
83 dB/W at 1 m
Dimensions
Width
76 mm (3")
280 mm (11")
76 mm (3")
Height
230 mm (9-1/16")
104 mm (4-1/8")
230 mm (9-1/16")
Depth
78 mm (3-1/16")
81 mm (3-3/16")
78 mm (3-1/16")
Net Weight
1.1 kg (2.4 lb)
1.2 kg (2.7 lb)
1.1 kg (2.4 lb)
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed
without notice.
SPECIFICATIONS
EXTERNAL VIEW
FRONT, SURROUND SPEAKER
Push terminal
(E21-0960-05)
Binding head
taptite screw
(N89-3512-43)x12
Woofer
(T10-1251-15)x2
Protector
(F09-2008-08)
Flat head
tapping screw
(N47-3516-41)x2
Tweeter
(T03-0885-15)
CENTER SPEAKER
Protector
(F09-2007-08)
Tweeter
(T03-0885-15)
Woofer
(T10-1251-15)x2
Binding head
taptite screw
(N89-3512-43)x12
Flat head
tapping screw
(N47-3516-41)x2
Push terminal
(E21-0960-05)
Binding head
machine screw
(N35-5010-41)x2
Stand
(A09-0813-08)
70%


background image
2
KS-708HT
DIVIDING NETWORK UNIT
INPUT
BLK
SP2
SP1
RED
BLK
+
-
+
-
+
-
GRN
BLK
; #. 205 FASTON
; #. 110 FASTON
BLU
SP1
BLK
+
-
BLU
C1
1
µ100
C2
100
µ100


background image
3
Replacing the protector or speaker driver
First, remove the top sub panel that is attached to the panel
using double-side adhesive tape.
Next, remove the protector by sliding it upwards
When replacing the protector or speaker driver of the center
speaker, remove the right panel in the same way as above.
Replacing the network component or push terminal
The network is attached on the bottom panel. Remove the
bottom panel in the same way as the method described in
"Replacing the protector or speaker driver".
To facilitate removal of the network, remove some speaker
drivers.
The network for the center speaker is attached to the left panel.
The protector can also be removed by sliding it downwards (or
leftwards in case of the center speaker).
Disassembling this product results in damaging the panel and sub panel. Please prepare the spare panel and sub panel before
disassembly.
Sub panel
(A22-3502-08)
Panel
(A29-0976-08)
Flat head
taptite screw
(N88-3520-43)
KS-708HT
DISASSEMBLY FOR REPAIR


background image
KS-708HT
PARTS LIST
CENTER SPEAKER
FRONT/SURROUND SPEAKER
KS-708HT
Ref. No.
Address
New
Parts
Parts No.
Description
Desti-
nation
Re-
marks
New Parts
Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. Teile ohne Parts
No. werden nicht geliefert.
-
*
B61-1214-00
INSTRUCTION MANUAL
-
*
E30-7061-05
SPEAKER CORD(WHITE FRONT L)
-
*
E30-7062-05
SPEAKER CORD(RED FRONT R)
-
*
E30-7063-05
SPEAKER CORD(GREEN CENTER)
-
*
E30-7064-05
SPEAKER CORD(BLUE SURROUND L)
-
*
E30-7065-05
SPEAKER CORD(GRAY SURROUND R)
-
*
G13-3042-05
CUSHION(ACCESSORY)
-
*
H10-8450-08
POLYSTYRENE FOAMED FIXTURE
-
*
H25-2599-08
PROTECTION BAG(CENTER)
-
*
H25-2600-08
PROTECTION BAG(FRONT,SURROUND)
-
*
H51-2061-08
ITEM CARTON CASE
-
*
J22-1012-05
MOUNTING HARDWARE(ACCESSORY)
-
*
N35-5010-41
BINDING HEAD SCREW(ACCESSORY)
-
*
A22-3502-08
SUB PANEL
-
*
A29-0976-08
PANEL
-
*
E21-0960-05
PUSH TERMINAL
-
*
F09-2008-08
PROTECTOR
C1
*
C90-6552-05
NP-ELEC 1.0UF 100WV
C2
*
C90-6553-05
NP-ELEC 100UF
100WV
SP1
*
T10-1251-15
WOOFER
SP2
*
T03-0885-15
TWEETER
-
*
A09-0813-08
STAND
-
*
A22-3502-08
SUB PANEL
-
*
A29-0976-08
PANEL
-
*
E21-0960-05
PUSH TERMINAL
-
*
F09-2007-08
PROTECTOR
C1
*
C90-6552-05
NP-ELEC 1.0UF 100WV
C2
*
C90-6553-05
NP-ELEC 100UF
100WV
SP1
*
T10-1251-15
WOOFER
SP2
*
T03-0885-15
TWEETER