background image
AUDIO VIDEO CONTROL CENTER
KRF-V7200D
KRF-V6200D
INSTRUCTION MANUAL
© B60-5678-00/00 (E, X) KW


background image
2 English
Before applying power
Caution : Read this page carefully to ensure safe
operation.
Units are designed for operation as follows.
Australia ......................................................................................AC 240 V only
Europe .........................................................................................AC 230 V only
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for EU
countries that have adopted separate waste
collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable of handling
these items and their waste by products.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Unpacking
Unpack the unit carefully and make sure that all the accessories
are present.
FM indoor antenna (1)
AM loop antenna (1)
Remote control unit (1)
Batteries (R03) (2)
RC-R0732
If any accessories are missing, or if the unit is damaged or fails to
operate, notify your dealer immediately. If the unit was shipped
to you directly, notify your shipper immediately. Kenwood
recommends that you retain the original carton and packing
materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
Notes on instructions
The operating instructions given in this manual assume that the
user mainly operates the receiver using the remote control unit.
When the same operation is also available on the main unit, the
operating method is indicated in illustrations.
The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT
SELECTOR] knobs on the main unit are operated by turning the
knobs clockwise or counterclockwise.
Example:
Getting into the setup mode
The setup procedure is identical for all of the setting elements.
Once you remember the following procedure, you can easily set
up other setting elements.
MULTI CONTROL
SETUP
SETUP
MULTI CONTROL
/
oe Press [SETUP] to enter the setup mode.
Use [MULTI CONTROL 5/] to select the element to
setup.
Display
Selection
"SP SETUP"
Speaker setup
"TEST TONE"
Test tone
"DISTANCE"
Distance
"LFE LVL"
Low frequency effects level
"EXIT"
Exit the setup mode.
é Press [SETUP] to get into the setup mode of the
selected element.
Safety precautions
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCT'
S ENCLOSURE THAT M AY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
The knob on the main unit
is pointed with an arrow to
indicate that it can be turned in
either direction.
The operating
procedures refer to
those of the remote
control unit. Some
operations are also
available using the key
(or knob) of the same
name on the main unit.
Options to be
selected are listed
in a table.


background image
English
3
12.Servicing ­ Do not attempt to service this product yourself
as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
13.Damage Requiring Service ­ Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance
­ this indicates a need for service.
g) If an abnormal smell or smoke is detected.
14.Replacement Parts ­ When replacement parts are required, be
sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
15.Safety Check ­ Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
16.Wall or Ceiling Mounting ­ This product should be mounted
to a wall or ceiling only as recommended by the manufacturer.
17.Heat ­ This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products that
produce heat. Do not place a flaming object, such as a candle
or lantern, or near the product.
18.Power Lines ­ An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
19.Outdoor Antenna Grounding ­ If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC ­ NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
Notes:
1. Item 7 is not required except for grounded or polarized equipment.
2. Item 19 complies with UL in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions ­ All the safety and operating instructions
should be read before the product is operated.
Retain Instructions ­ The safety and operating instructions should
be retained for future reference.
Heed Warnings ­ All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions ­ All operating and use instructions should be
followed.
1. Cleaning ­ Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
2. Attachments ­ Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
3. Water and Moisture ­ This product shall not be exposed to
dripping and splashing ­ for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like. Do not place an object containing
liquid, such as a flower vase, on the appliance.
4. Accessories ­ Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer. Any mounting of
the product should follow the manufacturer's instructions,
and should use a mounting accessory recommended by the
manufacturer. A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
5. Ventilation ­ Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
6. Power Sources ­ This product should be operated only from the
type of power source indicated on the product. If you are not sure of
the type of power supply to your home, consult your product dealer
or local power company.
7.
CAUTION ­ Polarization ­ This product may be equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
8. Power Cord Protection ­ Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the product.
9. Lightning ­ For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
10.Overloading ­ Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk of
fire or electric shock.
11.Object and Liquid Entry ­ Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
Caution : Read this page carefully to ensure safe operation.


background image
4 English
Contents
To ensure safety, read the items carrying
this marking carefully.
Before applying power ................................... 2
Safety precautions...........................................................2
Unpacking..................................................................................2
Notes on instructions.............................................................2
IMPORTANT SAFETY INSTRUCTIONS ............. 3
Special features........................................................................4
Names and functions of parts ............................. 5
Main unit ....................................................................................5
Remote control unit ...............................................................6
Preparing the remote control .............................................7
Setting up the system .......................................... 8
Speaker placement.................................................................8
Digital connections ................................................................9
Connecting a DVD player (6-channel input) .............. 10
Connecting audio components...................................... 11
Connecting video components ...................................... 12
Connecting video components
(COMPONENT VIDEO) .................................................... 13
Connecting the speakers (KRF-V7200D) ...................... 14
Connecting the speakers (KRF-V6200D) ...................... 15
Connecting the terminals ................................................. 16
Connecting to the AV AUX jacks and USB jack .......... 16
Connecting the antennas.................................................. 17
Speaker settings ................................................. 18
Speaker setup (Easy Setup) .............................................. 18
Speaker setting flow ........................................................... 19
Getting into the setup mode ........................................... 19
Speaker setup ("SP SETUP").............................................. 20
Adjusting the speaker level ("TEST TONE") ................. 20
Distance setting ("DISTANCE")......................................... 21
Low frequency effects level ("LFE LVL") ........................ 21
Normal Playback................................................. 22
Preparing for playback ....................................................... 22
Listening to a source component .................................. 23
Listening to music with PURE AUDIO MODE.............. 23
Operation of USB source .................................... 24
Playable USB device and files .......................................... 25
Adjusting the sound........................................... 26
Ambience effects ................................................ 27
Surround modes................................................................... 27
Surround play ........................................................................ 30
DVD 6-channel playback ................................................... 31
Listening to radio broadcasts............................ 32
Tuning (non-RDS) radio stations .................................... 32
Using RDS (Radio Data System) ..................................... 32
RDS Auto Memory ............................................................... 33
Presetting radio stations manually ................................ 33
Receiving preset stations .................................................. 34
Receiving preset stations in order (P.CALL)................. 34
Tuning by program type (PTY search) .......................... 35
Using the DISPLAY key ....................................................... 35
Recording ............................................................ 36
Recording mode setting in digital audio source
recording (main unit only) ........................................... 36
Recording audio (analog sources) ................................. 36
Recording video.................................................................... 36
Further adjustments .......................................... 37
Fine adjustment of the sound ......................................... 37
Additional functions .......................................... 39
Convenient functions ......................................................... 39
Remote control operations for
Kenwood DVD players.................................... 40
Troubleshooting ................................................. 41
Specifications...................................................... 44
Special features
PURE AUDIO MODE
£
This is the mode for enjoying audio sources in high-quality stereo.
It shuts off the power to the video circuitry as well as the display
to eliminate their influence on the audio circuitry and improve
the reproduced audio quality.
USB host for digital audio player
¢
The easily accessible front-mounted USB jack can accept USB
mass-storage-class compliant digital audio players or flash
memories. Audio files recorded in the USB device can be played,
and tag information such as title, artist name and album name
can also be displayed.
True home theater sound
This unit incorporates a wide variety of surround modes to bring
you maximum enjoyment from your video software. Select a
surround mode according to your equipment or the software you
are going to play and enjoy!
· Dolby Digital
· Dolby Digital EX
· Dolby Pro Logic II
· Dolby Pro Logic IIx
· DTS
· DTS-ES
· Neo:6
· DSP surround modes
· DVD 6-channel input
Before applying power


background image
English
5
Names and functions of parts
1
(power) key
Standby indicator
Switch the unit ON and standby.
When the unit is in standby mode, the
standby indicator is lit.
2 Surround LED indicators
DOLBY DIGITAL indicator
Light when this unit is in the Dolby
Digital mode.
DTS indicator
Light when in the DTS mode.
ACTIVE EQ indicator
Light when in the ACTIVE EQ mode.
SPEAKERS B indicator
Light when the speakers connected to
SPEAKER B jacks are in use.
3 Remote sensor
4 VOLUME CONTROL knob
5 PHONES jack
Use for headphone listening.
6 SPEAKERS A/B/OFF key
Use to select the front speaker, or
select not to use the front speaker.
7 LISTEN MODE key
º
Use to select the listen mode.
8 SETUP key
(
Use to select the speakers' settings
etc.
9 MULTI CONTROL knob
Use to control a variety of settings.
4/¢ knob
Use to skip the file of the USB source
backwards/forwards.
¢
Use to select the radio station.
¤
0 BAND key
Use to select the broadcast band.
6 key
Use to play/pause the USB source.
¢
! AUTO/MONO key
Use to select the auto tuning or
manual tuning mode.
¤
Use to select a recording mode.
fl
7 key
Use to stop playing the USB source.
@ ACTIVE EQ key
§
Use to select ACTIVE EQ setting.
# INPUT MODE key
TM
Use to switch between full auto,
digital and analog inputs.
Main unit
VOLUME CONTROL
USB/AV AUX
VIDEO
L-AUDIO-R
SPEAKERS A/B/OFF
PHONES
LISTEN MODE
SETUP
BAND
AUTO/MONO ACTIVE EQ INPUT MODE
MULTI CONTROL
INPUT SELECTOR
PURE AUDIO MODE
DOLBY DIGITAL
DTS
ACTIVE EQ
SPEAKRS B
PURE AUDIO MODE
USB
$ INPUT SELECTOR knob
Use to select the input sources.
% PURE AUDIO MODE key £
PURE AUDIO MODE indicator
Use to select PURE AUDIO MODE.
When this mode is on, the PURE
AUDIO MODE indicator is lit.
^ USB/AV AUX key
Use to select USB or AV AUX source.
& AV AUX jack
Use to connect a device such as a
camcorder and a game player.
* USB jack
Use to connect a USB device such as
a flash memory and a digital audio
player.
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.
Display
Band indicators
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speaker indicator
PRO LOGIC
indicator
AUTO DETECT indicator
DOLBY DIGITAL /
DOLBY DIGITAL EX
indicator
DTS / DTS-ES
indicator
CLIP indicator
ST. indicator
MUTE
indicator
TONE indicator
DSP MODE
indicator
DIGITAL indicator
6CH INPUT indicator
RDS indicator
PTY indicator
AUTO indicator
TUNED indicator
Input channel status indicator
Neo:6 indicator
DISCRETE 6.1
indicator
MATRIX 6.1
indicator