background image
AUDIO-VIDEO CONTROL CENTER
KRF-V6400D
KRF-V5450D
INSTRUCTION MANUAL
© B60-5810-08/00 (E/X)
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands


background image
2 KRF-V6400D/KRF-V5450D
Before
use
Safety precautions
¤ Caution : Read this page carefully to ensure safe
operation.
Units are designed for operation as follows.
Australia ......................................................................................AC 240 V only
Europe .........................................................................................AC 230 V only
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
Information on Disposal of Old Electrical and
Electronic Equipment and Batteries (applicable
for EU countries that have adopted separate
waste collection systems)
Products and batteries with the symbol (crossed-
out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their waste
byproducts.
Contact your local authority for details in locating
a recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing detrimental
effects on our health and the environment.
Notice: The sign "Pb" below the symbol for
batteries indicates that this battery
contains lead.
Unpacking
Unpack the unit carefully and make sure that all the accessories
are present.
FM indoor antenna (1)
AM loop antenna (1)
Remote control unit (1)
RC-R0518
Batteries* (R03) (2)
If any accessories are missing, or if the unit is damaged or fails to
operate, notify your dealer immediately. If the unit was shipped
to you directly, notify your shipper immediately. Kenwood
recommends that you retain the original carton and packing
materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
* Batteries are attached to
the packing material.
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft,
dry cloth. Do not use thinner, benzine, alcohol, etc. for these
agents may cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a
malfunction. Be specially careful not to use contact cleaners
containing oil, for they may deform the plastic component.


background image
English
3
Before
use
12.Servicing ­ Do not attempt to service this product yourself
as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
13.Damage Requiring Service ­ Unplug this product from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions.
e) If the product has been dropped or damaged in any way,
and
f) When the product exhibits a distinct change in performance
­ this indicates a need for service.
g) If an abnormal smell or smoke is detected.
14.Replacement Parts ­ When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
15.Safety Check ­ Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
16.Wall or Ceiling Mounting ­ This product should be mounted to
a wall or ceiling only as recommended by the manufacturer.
17.Heat ­ This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products that
produce heat. Do not place a flaming object, such as a candle or
lantern, or near the product.
18.Power Lines ­ An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
19.Outdoor Antenna Grounding ­ If an outside antenna or cable
system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC ­ NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMPS
Notes:
1. Item 7 is not required except for grounded or polarized equipment.
2. Item 19 complies with UL in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions ­ All the safety and operating instructions should
be read before the product is operated.
Retain Instructions ­ The safety and operating instructions should
be retained for future reference.
Heed Warnings ­ All warnings on the product and in the operating
instructions should be adhered to.
Follow Instructions ­ All operating and use instructions should be
followed.
1. Cleaning ­ Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
2. Attachments ­ Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
3. Water and Moisture ­ This product shall not be exposed to
dripping and splashing ­ for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like. Do not place an object containing
liquid, such as a flower vase, on the appliance.
4. Accessories ­ Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer. Any mounting
of the product should follow the manufacturer's instructions,
and should use a mounting accessory recommended by the
manufacturer. A product and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
5. Ventilation ­ Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
6. Power Sources ­ This product should be operated only from the
type of power source indicated on the product. If you are not sure of
the type of power supply to your home, consult your product dealer
or local power company.
7.
CAUTION ­ Polarization ­ This product may be equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
8. Power Cord Protection ­ Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the product.
9. Lightning ­ For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
10.Overloading ­ Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of fire
or electric shock.
11.Object and Liquid Entry ­ Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
¤ Caution :Read this page carefully to ensure safe operation.


background image
4 KRF-V6400D/KRF-V5450D
Before
use
Contents
¤To ensure safety, read the items carrying this marking
carefully.
Before use
¤Safety precautions ........................................... 2
Unpacking ............................................................. 2
¤IMPORTANT SAFETY INSTRUCTIONS .............. 3
Contents................................................................. 4
Special Features .................................................... 5
How to read this manual....................................... 6
Names and functions of parts .............................. 7
Connections
Notes on connections ......................................... 11
Speaker placement ............................................. 11
Connecting components equipped with HDMI
terminals .......................................................... 12
Connecting a TV Monitor.................................... 13
Connecting a CD player ...................................... 14
Connecting a DVD player ................................... 15
Connecting a video player.................................. 16
Connecting an audio player ............................... 17
Connecting to the [AV AUX] jacks ...................... 17
Connecting speakers .......................................... 18
Connecting antennas.......................................... 20
Turning this unit ON............................................ 21
Setup
Speaker setup (Easy Setup)................................ 22
Speaker setup (Detailed Setup) ......................... 23
Speaker setup flow
Speaker configuration
Speaker Level
Speaker Distance
Crossover
LFE (Low Frequency Effect) Level
Lip Sync (KRF-V6400D only)
HDMI setup .......................................................... 26
HDMI setup flow
Audio Out
Lip Sync (KRF-V6400D only)
HDMI Link
Power Control
Playing music or movie
Preparation for playing music or movie............ 28
Turning on the power
Setting the speaker system
Selecting the input mode
Playback............................................................... 29
Monitoring the input source in the original sound
(STRAIGHT DECODE mode)............................. 29
Listening to music with PURE AUDIO MODE..... 30
Surround effects
Listen mode ......................................................... 31
About indicators
Surround play using the listen mode ................ 32
Checking the current input signal ..................... 32
Listening to radio broadcasts
Tuning into a radio station ................................. 33
Using RDS (Radio Data System) ......................... 34
RDS Auto Memory............................................... 34
Presetting radio stations manually ................... 35
Receiving preset stations ................................... 35
Receiving preset stations in order (P.CALL) ...... 36
Tuning by program type (PTY search) ............... 37
Using the DISPLAY key........................................ 37
Sound adjustment
Adjusting the sound ........................................... 38
ACTIVE EQ mode
Bass Boost
Adjusting the Tone
Adjustments according to the playing source .. 39
Speaker level adjustment
Input level adjustment
Midnight mode
Panorama mode
Dimension
Center width
Center image
Convenient functions
Convenient functions ......................................... 42
Display dimmer adjustment
Listening with headphones
Muting the sound
Remote control operations for Kenwood DVD
players .............................................................. 43
Troubleshooting
Troubleshooting.................................................. 44
Resetting the unit
Glossary ............................................................... 46
Specifications ...................................................... 48


background image
English
5
Before
use
Special Features
\
\ HDMITM(High-Definition Multimedia Interface) repeater function
HDMITM(High-Definition Multimedia Interface) repeater function
Compatibility with the HDMI interface can transfer HDTV video and latest high-quality audio. It makes possible entertainment of
high-quality video recorded on Blu-Ray discs as well as high-quality audio including multi-channel PCM signal.
\
\ High-quality music playback in Pure Audio Mode
High-quality music playback in Pure Audio Mode
This function reproduces music signals in high quality with high fidelity to original sound.
In this mode, the display and the analog video circuitry are turned off to eliminate their effects on the audio circuitry. In addition, the
optimum listen mode is selected according to the input music signal.
\
\ True home theater sound
True home theater sound
This unit incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a
surround mode according to your equipment or the software you are going to play and enjoy!
KRF-V6400D KRF-V5450D
Dolby Digital
Dolby Digital EX
Dolby Pro Logic II
Dolby Pro Logic IIx
DTS Digital Surround
DTS-ES
DTS Neo:6
DTS 96/24
Multi Channel PCM
\
\ Easy Setup of the speaker
Easy Setup of the speaker
The speaker settings can be completed by simply selecting the room type and the listening position. The audio will be corrected
automatically according to the characteristics of the speaker system in use.
\
\ Crossover Frequency Adjustment
Crossover Frequency Adjustment
The bass frequency from the subwoofer and the other speakers can be adjusted making better sound phase between speakers and
natural sound field.
\
\ Lip Sync function (KRF-V6400D only)
Lip Sync function (KRF-V6400D only)
This function corrects deviation between the video and audio. Automatic correction is also available provided that all of the playback
component, this unit and the TV are connected through HDMI.
Manufactured under license under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467;
7,212,872 & other U.S. and worldwide patents issued & pending.
DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks
and the DTS logos, Symbol and DTS 96/24 are trademarks of DTS,
Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing, LLC.