background image
KRC-477R
KRC-477RV
KRC-377R
KRC-32R
© B64-1326-00 (EW)
CASSETTE RECEIVER
INSTRUCTION MANUAL


background image
-- 2 --
English
Contents
Before use
Safety precautions ........................................................................3
Basic operations
Power............................................................................................5
Switching Modes ..........................................................................5
Volume ..........................................................................................5
Attenuator .....................................................................................6
Loudness ......................................................................................6
Menu System................................................................................6
Tuner features
Selecting Tuning Mode .................................................................8
Tuning ...........................................................................................8
Local Seek Function ......................................................................8
Monaural Reception ......................................................................8
Station Preset Memory .................................................................9
Auto Memory Entry.......................................................................9
Preset station seek with Programme service name ...................10
Switching Display for Tuner ........................................................10
RDS features
RDS (Radio Data System) ...........................................................11
EON (Enhanced Other Network).................................................11
Alarm...........................................................................................11
AF (Alternative Frequency) Function ...........................................12
Restricting RDS Region (Region Restrict Function) ....................12
Auto TP Seek Function................................................................12
Traffic Information Function ........................................................13
Presetting Volume for Traffic Information/News ........................13
News Bulletin Function with PTY News Timeout Setting...........14
Programme Type (PTY) Function ................................................14
Cassette player features
Playing Cassette Tapes ...............................................................16
Fast Forwarding and Rewinding Cassette Tapes........................16
Blank Skip....................................................................................17
Tuner Call ....................................................................................17
Tape Advance .............................................................................17
Music Repeat ..............................................................................17
Clock display ...............................................................................18
External disc control features
Playing Disc mode.......................................................................19
Fast Forwarding and Reversing Disc Play ...................................19
Track Search................................................................................20
Disc Search .................................................................................20
Track / Disc Repeat .....................................................................20
Track Scan...................................................................................20
Disc Scan ....................................................................................21
Random Play ...............................................................................21
Magazine Random Play...............................................................22
Presetting Disc Names ...............................................................22
Disc Name Preset Play (DNPP) ..................................................23
Text / Title Scroll..........................................................................24
Switching Display for Discs.........................................................24
Other features
Selectable Illumination ................................................................25
Audio Control Setting ..................................................................26
Adjusting Time ............................................................................26
TEL Mute ....................................................................................27
Touch Sensor Tone .....................................................................27
Navigation Mute Function ...........................................................27
Disabled System Indicator (DSI)..................................................28
Theft Deterrent Faceplate ...........................................................28
Installation
Accessories.................................................................................29
Installation Procedure..................................................................29
Connecting Cables to Terminals .................................................30
Installation ...................................................................................33
Troubleshooting guide ........................................35
Specifications .....................................................38


background image
-- 3 --
To prevent injury and/or fire, take the
following precautions:
· Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
· When extending the ignition, battery or
ground cables, make sure to use automotive-
grade cables or other cables with an area of
0.75mm2 (AWG18) or more to prevent cable
deterioration and damage to the cable
coating.
· To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
· If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
· Make sure not to get your fingers caught
between the faceplate and the unit.
· Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
· Do not touch the liquid crystal fluid if the LCD
is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
2WARNING
To prevent damage to the machine,
take the following precautions:
· Make sure to ground the unit to a negative
12V DC power supply.
· Do not open the top or bottom covers of the
unit.
· Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
· Do not set the removed faceplate or the
faceplate case in areas exposed to direct
sunlight, excessive heat or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
· To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
· Do not subject the faceplate to excessive
shock, as it is a piece of precision equipment.
· When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
· To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
· Do not place any object between the
faceplate and the unit.
· During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
2CAUTION
IMPORTANT INFORMATION
You cannot connect the unit directly to the
following CD automatic changers. For users
who want to use older changers with the
unit, follow the directions below according to
the type of changer you own:
· KDC-C200 / KDC-C300 / KDC-C400
Use the extension cable and the control box
attached to the CD changer, and the optional
CA-DS100 converter cable.
· KDC-C301 / KDC-C600 / KDC-C800 / KDC-
C601 / KDC-C401
Use the extension cable attached to the CD
changer, and the optional CA-DS100
converter cable.
· KDC-C100 / KDC-C302 / C205 / C705 /
non-Kenwood CD changers
Cannot be used with this model.
You can damage both your unit and
the CD changer if you connect them
incorrectly.
2CAUTION
Safety precautions


background image
-- 4 --
English
· If you experience problems during
installation, consult your Kenwood dealer.
· If the unit does not seem to be working right,
try pressing the reset button first. If that does
not solve the problem, consult your Kenwood
dealer.
· Characters in the LCD may become difficult
to read in temperatures below 41 °F (5 °C).
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
NOTE
Cleaning the Unit
If the front panel gets dirty, turn off the
power and wipe the panel with a dry silicon
cloth or soft cloth.
Do not wipe the panel with a stiff cloth or a
cloth dampened by volatile solvents such as
paint thinner and alcohol. They can scratch
the surface of the panel and/or cause the
indicator letters to peel off.
2CAUTION
Safety precautions
Cleaning the Tape Head
After you have used the tape player many
times over a long period, magnetic powder
from the tapes and dust accumulates on the
tape head, causing noise and a deterioration
in sound quality. Clean the tape head using a
cleaning tape or cleaning kit designed for use
in car audio systems.
Handling Cassette Tapes
· Do not play a cassette whose tape has gone
slack. In such a case, wind it tight using a
pencil or the like in one of the spools. Playing
slack cassette tapes can result in the tape
tangling around the capstan and/or pinch
rollers, causing trouble.
· Do not play a deformed cassette or one
whose label is starting to come off, as it can
cause the unit to malfunction.
· Do not leave tapes in hot places, such as
above the fascia panel (dashboard) and other
spots exposed to direct sunlight, or near
heater outlets. They can deform the cassette.
· Avoid using extremely long cassette tapes,
such as 100-minute-long tapes. Such tapes
are very thin, and can tangle easily around
the pinch rollers or other parts inside the unit,
causing unit failure.
· Remove a cassette tape from the unit when
not listening to it for a whilst. If you leave a
tape in the unit too long, it may stick to the
tape head and cause unit malfunction.
SRC
PWR
EJECT
OFF
/ PTY
MENU
SCAN
B.S/RDM
REP
T.C/D.SCN
M.RDM
CD MD-CHANGER CONTROL
DISC
DISC
TI
VOL ADJ
LOUD
CLK
NAME.S
Reset button


background image
Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.
Volume
Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
The mode switches to the next mode from any mode which
cannot be used.
NOTE
w
Tuner mode
w
Tape mode
w
External disc control mode
Switching Modes
Turning on the power:
Press the SRC button.
Turn the power on before carrying out the following procedures.
Turning off the power:
Hold down the PWR OFF button for one second or more.
NOTE
Power
Basic operations
-- 5 --
SRC
PWR
EJECT
OFF
/ PTY
MENU
TI
VOL ADJ
LOUD
CLK
NAME.S
SCAN
B.S/RDM
REP
T.C/D.SCN
M.RDM
CD MD-CHANGER CONTROL
DISC
DISC
SRC /
PWR OFF
FM
AM
MENU
uA T T
d
ATT / LOUD
ATT indicator
LOUD indicator