background image
KCA-BT200
Bluetooth UNIT
INSTRUCTION MANUAL
APPAREIL Bluetooth
MODE D'EMPLOI
UNIDAD Bluetooth
MANUAL DE INSTRUCCIONES
© B64-4121-10/01 (KW/ EW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new Bluetooth unit.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KCA-BT200 Serial number
US Residence Only
Register Online
Register your Kenwood product at
w w w.Kenwoodusa.com


background image
2 | KCA-BT200
Contents
Before use
3
Basic Operation
of hands-free phoning (Model-A)
4
Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions
Basic Operation
of hands-free phoning (Model-B)
6
Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions
Basic Operation
of hands-free phoning (Model-C)
8
Before Use
Making a call
Receiving a call
Call waiting
During a call
Other functions
Basic Operation
of hands-free phoning (Model-D)
10
Before Use
Making a call
Receiving a call
During a call
Other functions
Function Operation
12
Registering Bluetooth device
Registering Special Bluetooth device
Registering PIN Code
Downloading the Phone Book
Selecting the Bluetooth device You Wish to
Connect
Deleting a Registered Bluetooth device
Displaying the Firmware Version
Adding a voice dialing command
Setting a Voice Command for Category
Downloading the SMS
SMS (Short Message Service)
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
Remote control
17
Making a call
Receiving a call
Call waiting
During a call
Bluetooth Audio
17
Before Use
Playing Bluetooth Audio
Operation
of hands-free phoning (Model-E)
18
Before Use
Hands-Free Control screen
Remote Controller
Key Operation
Making a call
Receiving a call
During a call
Other functions
Appendix
22
Accessories/ Installation Procedure 24
Connection
25
Installation
25
Troubleshooting Guide
26
Specifications
27


background image
English
|
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
· To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
· Mounting and wiring this product requires skills and
experience. For safety's sake, leave the mounting
and wiring work to professionals.
2CAUTION
To prevent damage to the machine, take
the following precautions:
· Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
Notes
· If you experience problems during installation,
consult your Kenwood dealer.
· The capital letters and small letters of the display
can be reversed.
· The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Kenwood Receivers available for this unit
Operation methods are classified into groups by
receiver (control unit) type.
First, refer to the model list in <Appendix> (page 22)
to confirm the group of the operation you whish to
perform.
Model-A, Model-B, Model-C, or Model-D
Refer to the relevant pages (<Basic Operation of
hands-free phoning>). To use a Bluetooth audio player
with this unit, refer to <Bluetooth Audio> (page 17).
Model-E
Refer to the relevant pages (<Operation of hands-free
phoning>). To use a Bluetooth audio player with this
unit, refer to <Bluetooth Audio> (page 17).
Model-F
After performing the operation mentioned on page
12, refer to the Instruction Manual for Control Unit. To
use a Bluetooth audio player with this unit, refer to
<Bluetooth Audio> (page 17).
Notes on selecting and deleting a Hands-Free
Phone
· If a cell-phone is already selected, deselect it, and then
select a different one.
· "BT200 FW***" and the firmware version are displayed in the
cell-phone selection list. Although the same contents are
displayed in the deletion list, they cannot be deleted.
· The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.
Model-G
Refer to the Instruction Manual for Control Unit.
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 1.2
Profile
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/bt/information/
/
· The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
· HFP is a profile used to make a hands-free call.
· OPP is a profile used to transfer data such as a phone book
between units.
About the Bluetooth Audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Standard Ver. 1.2
Profile
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
/
· A2DP is a profile designed to transfer the music from an
audio player.
· AVRCP is a profile designed to control playback and
selection of music by an Audio player.


background image
4 | KCA-BT200
Before Use
· You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 12).
· If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 14).
· To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 13).
· For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
· For more information regarding the function with
[
] mark, see <Function note> (page 23).
Making a call
Dialing Method
1. Select dialing method item during Menu mode
Select the "DIALING MODE"/ "D.MODE" display.
2. Select a dialing method
Press the [
38] button.
· "NUMBER DIAL" » "PHONE BOOK1" » "PHONE
BOOK2" » "OUT-CALL" » "IN-CALL" » "MISSED
CALLS"
· "N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUT-
CALL" » "IN-CALL" » "MIS-CALL"
3 Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Exit Menu mode.
3 Dial a number(
)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Enter a phone number
Press the number ([1] ­ [0]), #([FM]), *([AM]), or
+([
¢]) button on the remote controller.
2-3. Make a call
Press the [DIRECT] button on the remote controller.
You can input max 32 digits.
3 Speed dialing (Preset dial)
2-1. Select the "NUMBER DIAL"/ "N-DIAL" display.
2-2. Select the preset dial number
Press the [1] ­ [6] button.
2-3. Make a call
Press the [
38] button for at least 1 second.
You need to register the preset dial number. (page 5)
3 Calling a number in the call log (
)
2-1. Select the "OUT-CALL" (outgoing call), "IN-CALL"
(incoming call), or "MISSED CALLS"/"MIS-CALL"
(missed call) display.
Basic Operation of hands-free phoning (Model-A)
2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the [
38] button for at least 1 second.
3 Calling a number in the Phone Book (
)
2-1. Select the "PHONE BOOK1"/"PH-BOOK1" display,
proceed to step 2-2.
Select the "PHONE BOOK2"/"PH-BOOK2" display,
proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
character.
Push the Control knob towards right or left.
Move to the next row. Push the Control knob towards up or down.
Determine the
selected initial
Press the [
38] button for at least 1 second.
2-3. Select the name
Operation type
Operation
Change the name.
Push the Control knob towards up or down.
Change the initial.
Push the Control knob towards right or left.
2-4. Make a call
Press the [
38] button for at least 1 second.
Make a voice dialing call
1. Select voice recognize item during Menu mode
Select the "VOICE RECOG"/ "V-RECOG" display.
2. Press the [
38] button for at least 1 second.
"V-RECOG READY"/ "VR READY" is displayed.
3. Press the [
38] button.
"PB NAME" is displayed.
When a beep is heard, utter the name within 2
seconds.
4. "PB TYPE"/ "PN type" is displayed.
When a beep is heard, utter the category within 2
seconds.
5. Make a call
This step is the same as step 3 of the procedure in
<Calling a number in the Phone Book>. You can
make a call or select a category.
If your voice cannot be recognized, a message is
displayed. Pressing the [
38] button allows you to retry
voice input. (page 26)
Both the name and category requires registration of a
voice tag. (page 15)
Audio sound is not output during voice recognize.
Display of phone number type (category)
Display
Description
Display
Description
"GE"/ "GENERAL" General
"OF"/ "OFFICE"
Office
"HM"/ "HOME"
Home
"OT"/ "OTHER"
Other
"MO"/ "MOBILE" Mobile


background image
English
|
5
Receiving a call
Answering a Phone Call
Model-A-1: Press the Control knob or one of [1] ­ [6]
buttons
Model-A-2: Press the [VOL] button or one of [1] ­ [6]
buttons
Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
)
Press the [
38] button.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Model A-1: Turn the Control knob.
Model A-2: Turn the [VOL] knob.
Other functions
Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] ­ [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display
Setting overview
"DVC REGIST"*/ "DVC
REG"*
Register a Bluetooth device (pairing). Refer to page 12.
"S-DVC SELECT"*/
"SDVC SEL"*
Allow registration of a special device that cannot be
registered normally. Refer to page 12.
"PHONE SEL"*/
"PHN-SEL"*
Select a cell-phone subject to hands-free connection.
Refer to page 14.
"DIALING MODE"*/
"D.MODE"*
Select a dialing method. Refer to page 4.
"AUDIO SEL"*/
"AUD-SEL"*
Select the audio player to be connected. Refer to page
14.
"SMS DOWNLOAD"*/
"SMS DL"*
Download a short message. Refer to page 16.
"SMS INBOX"*/
"INBOX"*
Display the received short message. Refer to page 16.
"VOICE TAG"*/
"VOICETAG"*
Register the voice tag for "voice recognize". Refer to
page 15.
"VOICE RECOG"*/
"V-RECOG"*
Make a voice dialing call. Refer to page 4.
"DEVICE DEL"*/
"DVC-DEL"*
Cancel registration of the Bluetooth device. Refer to
page 14.
"DVC-STATUS"/
"D-STATUS"
"HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL": Display
the status of the Bluetooth device. Refer to page 22.
"PIN EDIT"*
Specify the PIN code required when registering this unit
using the Bluetooth device. Refer to page 12.
"AUTO ANS"/
"ANS"
"OFF"/ "0"­ "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
Refer to page 22.
"SP SEL"/
"SPK"
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
Refer to page 22.
"CALL BEEP"/ "C-BP" "ON"/ "OFF": Output a beep from the speaker when a
call comes in. Refer to page 22.