background image
7
OPEN/
CLOSE
LIST
SET UP
CLEAR
­ SLOW +
DISPLAY ON SCREEN
ENTER
STANDBY/ON
VFP
I/P
CANCEL
RETURN
SOUND
EFFECT
TITLE/
GROUP
DIMMER
AUDIO
SUBTITLE
ANGLE
SLIDE EFFECT
ZOOM
12
3
45
6
78
9
0
THUMBNAIL/
TOP
MENU
MENU
NEXT
PREVIOUS
SELECT
Basic playback
Buttons To do
3*
Start/resume normal Playback
7
Stop
· When RESUME is ON or DISC
RESUME, this player
memorizes the position on the
disc where you interrupted
playback.
­ To resume playback, press
3.
­ To stop playback completely,
press
7 again.
8*
Pause
· Each time you press
8 on the
remote control, the still picture
advances to the next frame.
¡/1 Fast forward/backward
(While paused)
Slow-motion playback
· Each time you press the button,
the playback speed changes.
¢/4 Skip chapter/track
· If you press and hold the button
during playback, playback is
advanced/reversed at 5 times
normal speed.
VARIABLE
PLAYBACK
/VARI-PLAY
(For DVD Video)
The disc is played back at about
1.2 or 1.5 times (FAST)/0.8 or 0.6
times (SLOW) normal speed.
The sound is not muted, and the
subtitle does not go off (except
for DTS).
(For SVCD/VCD)
The disc is played back at about
2 times (FAST)/0.5 times (SLOW)
normal speed.
(Only for DVD Video)
The playback position moves
back 10 seconds before the
current position (only within the
same title).
*
38 on the player starts/pauses playback.
Changing the display brightness
Press DIMMER to change the brightness
of the display window.
Using the disc menu
You can operate a disc--SVCD/
VCD with Playback Control*
(PBC)--using the disc menu
shown on the TV screen.
* A method of controlling disc play
for SVCD/VCD by using the disc
menu.
7 For DVD
1 Press TOP MENU or MENU to show the disc menu.
2 Press
5//2/3 to select a desired item, then press
ENTER or
3(SELECT).
· With some discs, you can also select items by entering the
number using the numeric buttons.
7 For SVCD/VCD
1 While stopped, press TOP MENU or
3(SELECT) to
show the menu.
2 Press the numeric buttons to select a desired item.
To select 5: press 5.
To select 23: press 2, then 3.
To select 40: press 4, then 0.
· To move to the next or previous page of the current menu,
press
¢ or 4.
· To return to the previous menu, press RETURN.
To play back without PBC
While stopped, press the numeric buttons instead of
3
(SELECT) to start playback.
To reactivate PBC
· Press TOP MENU or MENU.
· Press
7 to stop playback, then 3(SELECT).
Turning on and off the player
Open/close the disc tray
Changing the display window
contents
Each time you press DISPLAY,
the display window contents
changes.
Locating the beginning of a scene
or song
You can select a title/chapter/
track directly and start playback.
For DVD Video:
(While stopped) select title.
(While playing back) select
chapter.
For SVCD/VCD/CD:
Select track.
To select 5: press 5.
To select 23: press 2, then 3.
To select 40: press 4, then 0.
·If you press TITLE/GROUP
before entering the number, you
can select the title instead of the
chapter.
6
Basic Operations
With the label side up
Turning on and off the player
Insert a disc
1 Press
0 to open the disc tray.
2 Place a disc in the disc tray.
· To insert an 8-cm disc, place it in the inner
recess.
3 Press
0 to close the disc tray.
Point toward the remote sensor directly as possible
(the operating range is approx. 5 m.)
· Each indicator lights up when corresponding
function/mode is activated, or corresponding
information is on the main display.
Main display
About On-screen guide icons
: Playback.
: Pause.
/: Slow-motion playback with the current
speed.
/: Fast forward/backward playback with the
current speed.
: At the beginning of a scene containing multi-
angle views.
: At the beginning of a scene containing multi-
audio sounds.
: At the beginning of a scene containing multi-
subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
"ON SCREEN GUIDE" in "Initial settings.")
1
DVD PLAYER
XV-N422S
INSTRUCTIONS
©2005 Victor Company of Japan, Limited
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Caution ­­
STANDBY/ON button!
Disconnect the mains plug to shut the power off
completely. The
STANDBY/ON button in any
position does not disconnect the mains line. The power
can be remote controlled.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
CAUTION:
· Do not block the ventilation openings or holes. (If the
ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
· Do not place any naked flame sources, such as
lighted candles, on the apparatus.
· When discarding batteries, environmental problems
must be considered and local rules or laws
governing the disposal of these batteries must be
followed strictly.
· Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect
from damage, locate the apparatus as follows:
Front:
No obstructions and open spacing.
Sides:
No obstructions in 3 cm from the sides.
Top:
No obstructions in 5 cm from the top.
Back:
No obstructions in 15 cm from the back.
Bottom: No obstructions, place on the level surface.
GNT0060-017A[AG/AH/AX/AS/AA/UM]
EN
0305MOC-MW-SC
Region code of DVD VIDEO
This player can play back DVD VIDEO discs whose
region code numbers include the player's Region
Code, which is indicated on the region code symbol
on the rear panel.
Examples of playable DVD VIDEO discs:
The player's region code is printed on the rear of the
player
Note of Color system format
This player is compatible with the PAL and NTSC
systems. Select the correct color system for your TV
(see "Initial settings").
Supplied accessories
If anything is missing, consult your dealer
immediately.
· Audio/video cable (Yellow/White/Red) (x 1)
· Remote control (x 1)
· R6(SUM-3)/AA(15F) battery (x 2)
· AC power plug adaptor (x 1)
(Only for Singapore)
VIDEO
¤
ALL
2
5
2
4
2
3
1
23
1
56
4
XV-N422S
Wall or
obstructions
Floor
Spacing 15 cm or more
Stand height
5 cm or more
Front
2
Precautions
Notes on the power cord
· When you are away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet. A
small amount of power (1.0 W) is always consumed while
the power cord is connected to the wall outlet.
· When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
· Do not handle the power cord with wet hands!
· Disconnect the power cord before cleaning the
player or moving the player.
· Do not alter, twist or pull the power cord, or put
anything heavy on it, which may cause fire, electric
shock, or other accidents.
· If the cord is damaged, consult a dealer and have the
power cord replaced with a new one.
Avoid moisture, water, dust, and high temperatures
· Do not place the player in moist or dusty places.
· If water gets inside the player, turn off the power and
remove the plug from the wall outlet, then consult
your dealer. Using the player in this state may cause
a fire or electrical shock.
· Do not expose the player to direct sunlight or place it
near a heating device.
Notes on installation
· Select a place which is level, dry and neither too hot
nor too cold between 5°C and 35°C.
· Leave sufficient distance between the player and the TV.
· Do not install the player in a place subject to vibrations.
· Do not put heavy objects on the player.
To prevent malfunction of the player
· There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
· Do not insert any metallic objects, such as wires,
hairpins, coins, etc. into the player.
· Do not block the vents. Blocking the vents may
damage the player.
To clean the cabinet
· Use a soft cloth. Follow the relevant instructions on
the use of chemically-coated cloths.
· Do not use benzene, thinner or other organic solvents and
disinfectants. These may cause deformation or discoloring.
Playable discs
· DVD VIDEO, Audio CD, Video CD, SVCD
· DVD-R/-RW written in the DVD VIDEO format
· DivX files on DVD-R/-RW written in the UDF format
· CD-R/RW written in the SVCD, Video CD or Audio CD
format
· CD-R/RW written in MP3/WMA/JPEG/DivX in
accordance with the "ISO 9660" format
Supported Digital audio formats:
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital
Theater Systems)*
NOTES
· If a disc gets dirty, scratched or warped, or due to the
disc characteristics or recording conditions, the
player may not be able to play back such discs.
· The player can play back audio signals recorded in
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
· With some discs, operations may not be possible.
* To play back DTS-encoded DVD VIDEO or DTS-
encoded Audio CD discs correctly, connect the
player to an amplifier with a built-in DTS decoder.
Otherwise, playback sound will be distorted.
Unplayable discs
If you try to play back discs listed below, noise may be
generated and causes damage to speakers.
·DVD-RW written in the VR format
·DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
PHOTO CD, SACD
· Unfinalized discs
· Discs of irregular shape or discs with tape, seals or
paste on either the label side or playback side.
Playing back these discs may damage the player.
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
VIDEO
4
Connecting to a stereo audio amplifier (receiver)
Connecting to a digital audio device
To enjoy high-quality surround sound, connect the
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS
decoder or an amplifier with a built-in decoder.
NOTES
· Depending on the disc, no signal may be outputted
from the DIGITAL OUT. Make an analog connection
in this case.
· Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
preference display correctly according to the
connected digital audio equipment. (See "DIGITAL
AUDIO OUTPUT" in "Initial settings.")
Using the AV COMPU LINK system
The AV COMPU LINK system allows you to enjoy video
and/or audio by simply pressing Play on the source
component (the component which plays back the video
or audio, such as a DVD player or VCR). You
do not even have to switch on power on the TV or
receiver.
Connection and setup
Using an AV COMPU LINK cable, connect the AV
COMPU LINK terminals of each component to one
another.
· The player's AV COMPU LINK setting is controlled
using the OTHERS menu in the preference display.
See "AV COMPULINK MODE" in "Initial settings."
· See also the instruction manual of the other device.
EX. 1
· Set the player's AV COMPU LINK setting as follows:
­When connecting to the VIDEO-1 input terminal of
the television: DVD2
­When connecting to the VIDEO-2 input terminal of
the television: DVD3
EX. 2
· Set the VCR's Remote Control Code and the player's
AV COMPU LINK setting as follows:
­When connecting to the VIDEO-1 input terminal of
the television:
The player's AV COMPU LINK setting: DVD2
VCR's Remote Control Code: B
­When connecting to the VIDEO-2 input terminal of
the television:
The player's AV COMPU LINK setting: DVD3
VCR's Remote Control Code: A
EX. 3
· Set the player's AV COMPU LINK setting to DVD1.
Notes for connection
· If you connect the player to a receiver via AV COMPU
LINK in a system including a Dolby Digital decoder,
some functions may not be performed automatically.
·Connect the AUDIO OUT jacks of the player to the
audio input jacks of a receiver indicating "DVD."
Otherwise, the system will not work correctly.
Operation
1. Turn on the main power of the television.
2. Insert a disc (or tape) into the source component.
3. Press
3 of the source component.
The following actions are performed automatically:
· Turning on the television and/or receiver.
· Setting the source of the television to the external
input (VIDEO-1 or VIDEO-2).
· Setting the source of the receiver to the component
which has started playback.
LEFT
RIGHT
AUDIO OUT
VIDEO OUT
IDEO
VIDEO
PR
PB
Y
To analog audio input
COAXIAL
LEFT
RIGHT
PCM/STREAM
DIGITAL OUT
AUDIO OUT
VIDEO OUT
S-VIDEO
VIDEO
PR
PB
Y
To digital audio input
To analog
audio input
To AV COMPU LINK (II, EX, or III)
The player
TV
To AV COMPU LINK
(II, EX, or III)
The player
TV
VCR
To AV
COMPU LINK
To AV COMPU LINK
(II, EX, or III)
The player
TV
Receiver
To AV
COMPU LINK
3
Connections
Before making connections:
· Do not connect the AC power cord until all other connections have been made.
· Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.
Basic Connection
Connecting to a TV with component jacks
To switch the scanning mode between Progressive and
Interlace, press and hold VFP-I/P on the remote control
for a few seconds.
NOTES
· Connect "Y" to "Y,""PB" to "PB(CB),""PR" to "PR(CR)"
correctly.
· When using the component (Y, PB, PR) jacks, do not
connect the S-VIDEO jack with the player.
About the scanning mode indicator
NOTE
Some progressive TV and High-Definition TV sets are
not fully compatible with the player. To check the
compatibility of your TV, contact your local JVC
customer service center.
VIDEO
PB
PR
Y
COA
XIA
L
PCM
/STREAM
DIGITA
L OUT
AUDIO
OUT
AV
COMPU
LINK
VIDEO
OUT
RIGH
T
S-VIDEO
LEFT
RIGH
T
LEFT
AU
DIO
VIDEO
IN
S-VIDEO
NOTES
· Set the correct color system according to the
color system your TV supports. (See
"COLOUR SYSTEM" in "Initial settings.")
·If your TV has a monaural audio input
instead of stereo, use an optional audio
cable which converts stereo audio output to
monaural.
· If your TV is a HDTV or HD-ready TV, you can
connect with component (Y, PB, PR) jacks. By
connecting with component (Y, PB, PR) jacks,
you can select the progressive scanning
mode which provides the best picture quality.
*The S-VIDEO jack and the component (Y,
PB, PR) jacks cannot be used at the same
time.
When using the S-VIDEO jack, do not
connect the component (Y, PB, PR) jacks
with the player.
S-video cable*
(not supplied)
Audio/video
cable*
(supplied)
Red
White
TV
The player
Yellow
COAXIAL
LEFT
RIGHT
/STREAM
TAL OUT
AUDIO OUT
VIDEO OUT
S-VIDEO
VIDEO
PR
PB
Y
To component video input
[PICTURE SOURCE] of
the PICTURE menu
Source type of DVD VIDEO
Film source
Video source
AUTO
[DDP]
[P]
FILM
[DDP]
[DDP]
VIDEO(NORMAL)/
(ACTIVE)
[P]
[P]
5
Turning on the power
Inserting the AC power plug
After all other connections have been made, insert the
AC power plug to the wall outlet firmly.
Installing the batteries in the remote control
Open the compartment cover, and place the two
supplied R6(SUM-3)/AA(15F) batteries in the remote
control according to the polarity markings ("+" and "­")
inside the compartment. Then replace the cover.
The batteries will last about six months with normal use.
If the functions of the remote control become erratic,
replace the batteries.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
· Remove the batteries from the remote control if it is
not going to be used for a long period of time.
· Remove dead batteries and dispose of them
properly.
· Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them into
an incinerator.
· Never touch liquid that has leaked out of a battery.
· Do not mix new and old batteries, or batteries of
different types, when placing them.
Turning on and off the player
Press
STANDBY/ON.
Initial setup
When you turn on the player for the first time after
purchase, the following message appears on the TV
screen.
Before enjoying this player, make the initial settings as
follows:
1 Press ENTER.
2 Press
5/ to select the on-screen language for
the preference displays, etc., then press ENTER.
3 Press
5/ to select the monitor type, then press
ENTER.
· For a normal (conventional) TV, select "4:3 LB" or
"4:3 PS." (See "MONITOR TYPE" in "Initial
settings.")
· For a wide-screen TV, select "16:9."
4 Press
5/ to select a desired digital output
signal type, then press ENTER.
Set this item correctly according to the logo on your
receiver or decoder.
(If you do not connect the player to such a device,
press ENTER to finish the setting.)
· Receiver/decoder bearing Dolby Digital logo and
no DTS, select "DOLBY DIGITAL/PCM."
· Receiver/decoder bearing both Dolby Digital and
DTS logos, select "STREAM/PCM."
· Receiver/decoder bearing neither Dolby Digital nor
DTS logo, or digital recorder, select "PCM ONLY."
To bring up the DVD PLAYER SETUP display later
Press SET UP for a few seconds until the DVD PLAYER
SETUP display appears.
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
YES - PRESS ENTER
NO - PRESS CANCEL
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE
ENGLISH
DVD PLAYER SETUP
ENGLISH
CHINESE
SPANISH
MONITOR TYPE
4:3 L.B.
PICTURE SOURCE
AUTO
SCREEN SAVER
COLOUR SYSTEM
ON
PAL
BACKGROUND
STANDARD
DVD PLAYER SETUP
16:9
4:3 LB
4:3 PS
DIGITAL AUDIO OUTPUT
DOLBY DIGITAL/PCM
ANALOG DOWNMIX
DOLBY PROLOGIC
D.RANGE CONTROL
ON
OUTPUT LEVEL
DVD PLAYER SETUP
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
STANDARD
8
Advanced Operations
OPEN/
CLOSE
LIST
SET UP
CLEAR
­ SLOW +
DISPLAY ON SCREEN
ENTER
STANDBY/ON
VFP
I/P
CANCEL
RETURN
SOUND
EFFECT
TITLE/
GROUP
DIMMER
AUDIO
SUBTITLE
ANGLE
SLIDE EFFECT
ZOOM
12
3
45
6
78
9
0
THUMBNAIL/
TOP
MENU
MENU
NEXT
PREVIOUS
SELECT
Changing the picture tone (VFP)
The VFP (Video Fine Processor)
function allows you to adjust the
picture character according to the
type of programming, picture tone or
personal preferences.
1 Press VFP-I/P.
2 Press
2/3 to select the desired
preset.
NORMAL For watching TV in a
general room.
CINEMA
For watching a movie
software in a room with
suppressed light.
USER1
USER2
You can adjust
parameters that affect the
picture character and
store the settings as a user
preset. See below.
To adjust the picture tone
1 Select "USER1" or "USER2."
2 Press
5/ to select a parameter, then press ENTER.
3 Press
5/ to adjust the parameter, then press ENTER.
4 Repeat step 2 and 3 to adjust other parameters.
5 Press VFP-I/P to finish the setting.
USER 1
BRIGHTNESS
GAMMA
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+ 4
MID
+10
+10
+10
LOW
+ 2
Selected
Preset
Parameter
GAMMA
Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portion is
maintained (LOW/MID/HIGH).
BRIGHTNESS
Adjust this if the picture is bright or dark on the
whole (­16 (darkest) to +16 (brightest)).
CONTRAST
Adjust this if the far and near position is unnatural
(­12 to +12).
SATURATION
Adjust this if the picture is whitish or blackish
(­16 (blackest) to +16 (whitest)).
TINT
Adjust this if the appearance of flesh tone is
unnatural (­16 to +16).
SHARPNESS
Adjust this if the picture is indistinct (LOW/HIGH).
Y DELAY
Adjust this if the picture looks separately/
overlapped (­2 to +2).
Changing the Sound Field
Each time you press SOUND
EFFECT, the Sound Effect mode
changes.
· As the value becomes bigger, the
Sound Effect works stronger.
Zooming the picture
Each time you press ZOOM, the
magnification changes.
· You can use
5//2/3 button to
move the zoomed position.
To return to the normal playback,
select the normal size by pressing
ZOOM repeatedly.
Changing the language, sound
and scene angle
1 Press the button.
2 Press the button repeatedly or
5/ to select the desired item.
3 Press ENTER to finish the
setting.
Buttons
To do
AUDIO
For DVD Video:
select audio languages.
For SVCD/VCD:
select the audio
channel.
SUBTITLE
select the subtitle.
ANGLE
select the view-angle.
XV-N422[A]5.indd 1
XV-N422[A]5.indd 1
3/11/05 2:31:06 PM
3/11/05 2:31:06 PM


background image
9
Menu bar functions
You can use various functions from the menu bar.
To bring up the menu bar
When a disc is inserted, press ON SCREEN twice.
A menu bar for the type of disc inserted will appear
under the status bar.
Ex.: Menu bar for DVD VIDEO
To dismiss the menu bar and the status bar, press ON
SCREEN.
Basic operation procedure
1 Press
2/3 to select the icon you want to work with.
2 Press ENTER.
After pressing ENTER:
(1) When a pull-down menu appears, press
5/ to
select the setting you want, then press ENTER.
(2) When a number-entry box appears, use the
numeric buttons to enter the number you want,
then press ENTER.
(3) When changing
setting, press ENTER
repeatedly to select the setting you want.
NOTES
· The selected item on the menu bar is shown in green.
· The available functions differ depending on the
player status. Refer to the explanation below to check
when you can use a certain function.
Menu bar functions
selects the time mode shown in the display
window and the status bar.
· TOTAL: Elapsed time of current title (DVD) or a disc
(CD/VCD/SVCD)
· T.REM: Remaining time of current title (DVD) or a disc
(CD/VCD/SVCD)
(Except for DVD: while stopped, disc total
time)
· TIME:
Elapsed time of current chapter (DVD) or
track (CD/VCD/SVCD)
· REM:
Remaining time of current chapter (DVD) or
track (CD/VCD/SVCD)
(while stopped, current track total time)
selects repeat mode.
DVD:
During playback
CD:
In any condition
VCD/SVCD: In any condition except PBC playback
· CHAPTER: Current chapter repeat (DVD)
· TITLE:
Current title repeat (DVD)
· TRACK:
Current track repeat (CD/VCD/SVCD)
· ALL:
All track repeat (CD/VCD/SVCD)
· A-B:
A-B repeat (During playback). After
selecting A-B, press ENTER at the
beginning point of repeat, then press
ENTER again at the end point.
· OFF:
Repeat mode deactivated. Select this to
quit repeat mode.
specifies beginning point of a title (DVD) or a
disc (CD/VCD/SVCD) by the time.
DVD:
In any condition
CD:
In any condition except program or
random playback
VCD/SVCD: In any condition except PBC or program
or random playback
specifies a chapter to play back from
(DVD only).
10
selects the audio language (DVD), sound
track (DVD), or audio channel (VCD/SVCD) during
playback.
selects the subtitle language (DVD) or
subtitle (SVCD) during playback.
selects a desired scene angle in a multi-
angle part (DVD only).
specifies the playback order of tracks while
stopped (unavailable for DVD). You can program up to
99 tracks.
1. After selecting
icon, press the numeric
buttons to specify tracks in the desired order.
· To correct the program, press
5/ to move
to
the track to be corrected, then press CANCEL. The
track is erased and the subsequent programmed
tracks move up.
Pressing
7 clears all the programmed tracks.
2. Press
3(SELECT) to start program playback.
· During program playback, you cannot edit the
program contents.
· To exit the program mode, press ON SCREEN after
clearing the program.
activates random playback while stopped
(unavailable for DVD).
After selecting
icon, press ENTER.
The player starts random playback.
Audio/Video files playback
You can play back MP3/WMA/JPEG files on a CD/CD-R/
RW and DivX files recorded on CD-R/RW, DVD-R/-RW.
The player supports discs recorded with up to five
multiple sessions.
Precautions
· Use "ISO 9660" as the disc format.
· The player does not support "packet writing (UDF
files)" discs.
· The player may be unable to play back a disc due to
the characteristics or recording conditions.
· The player recognizes up to the fifth layer of groups,
999 files per group (including unplayable files), and
up to 250 groups per disc.
· Add the appropriate extension (".mp3", ".jpg",
".wma", and ".divx") to the file name.
· MP3i and MP3 Pro are not available.
·The player supports WMA files recorded with a bit rate
of 48 kbps or higher.
· The player cannot play back a picture of more than
5120 x 3413 pixels (baseline JPEG) or 2048 x 1536
pixels (progressive JPEG).
· The player supports the DivX files whose resolution is
720 x 480 pixels or less (30 fps), and 720 x 576 pixels
or less (25 fps).
Selecting a specific file or group
You can select files or folders (groups) using the
Control display on the TV screen.
Control display
Press
5//2/3 to move the cursor bar to a desired
file, then press
3(SELECT).
·When you press ENTER, only the selected file is
played back (only for JPEG files).
NORMAL
GROUP
MP3
SLIDESHOW
MIX
--
PICT01.jpg
PICT02.jpg
PICT03.jpg
MUSIC01.mp3
MUSIC02.mp3
DISC CONTROL
Select these
sections to show the
upper layer.
Current file
Group column
Current group
Current playback mode
File column
12
Troubleshooting
Power
Power does not come on.
\ Power plug is not inserted securely. Plug in
securely.
Operation
"REGION CODE ERROR!" is shown on the TV.
\ Region code of the inserted disc does not match the
player. Check the region code of the disc printed on
the disc jacket.
Operation is not possible.
\ Microcomputer malfunction due to lightning or static
electricity. Turn off the power and unplug the power
cord, then connect the power cord again.
\ Moisture condensation caused by a sudden change
of temperature or humidity. Turn off the power, then
turn it on a few hours later.
\ The disc does not allow the operation, or an
unplayable disc is inserted. Check and replace the
disc.
[LOCK] is displayed on the display window
and the disc tray does not open.
\ When you press 0 while pressing down 7 on the
player in standby mode, the tray lock function is
activated. The disc tray cannot be opened or closed
in this status. To release this status, press
0 while
pressing down
7 on the player in standby mode.
Picture
Picture is noisy.
\ The player is connected to a VCR directly and the
copyguard function is activated. Connect the player
so that the picture signal flows directly to the TV.
With some discs, the picture may be blurred when
[PICTURE SOURCE] is set to [FILM] or [AUTO].
Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or
[VIDEO (ACTIVE)].
Picture is distorted when using
component (Y, PB, PR) or S-VIDEO jack(s).
\ Both the component connection and S-video
connection are made. Disconnect the unused one.
No picture is displayed on the TV screen or the
screen is blurred or divided into two parts.
\ The player is in the progressive scanning mode
though it is connected to a TV via the VIDEO or
S-VIDEO jack. Observe the display window. If [P] is
turned on, the player is in the progressive scanning
mode.
Make the Progressive scanning mode inactive by
using the VFP-I/P button.
Audio
DVD VIDEO disc playback sound level is lower
than TV broadcast sound level.
\ Set the [D.RANGE CONTROL] preference to [TV
MODE].
Analog audio output is distorted.
\ Set the [OUTPUT LEVEL] preference to [LOW].
MP3/WMA/JPEG/DivX
No sound and/or no picture comes out.
\ MP3/WMA/JPEG disc is recorded with the "packet
writing (UDF file)." It cannot be played.
Check the files you want to play back.
Files (tracks) are not played in the recorded
order.
\ This player plays the files in the alphabetic order.
So, the playback order can vary.
WMA files cannot be played back.
\ The file is copy protected.
\ The file is recorded with a bit rate under 48 kbps.
The player does not support such WMA files.
DivX files are played back without sound.
\ This player can play back the MP3 sound for the
audio part of the DivX files. Select the proper audio
CODEC when making DivX files.
11
Various playback mode
· To play back a disc continuously, select NORMAL.
Repeat playback
1. While stopped, press
5//2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select the desired repeat
mode.
· REPEAT 1: Repeats the current file.
· REPEAT GROUP: Repeats all files in the current
group.
· REPEAT ALL: Repeats all files on the disc.
3. Press
3 to move the cursor bar to the file column,
then press
3(SELECT).
Random playback
1. While stopped, press
5//2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select RANDOM.
3. Press
3 to move the cursor bar to the file column,
then press
3(SELECT).
Program playback
1. While stopped, press
5//2/3 to move the cursor
bar to playback mode.
2. Press ENTER repeatedly to select PROGRAM.
3. Press
5//2/3 to select the desired file, then press
ENTER.
4. Repeat step 3 until all the desired files are selected.
· To erase the last programmed file, press
2 to
move the cursor bar to the programmed files
column, then press CANCEL.
5. Press
3(SELECT).
To zoom in a picture
Press ZOOM.
Each time you press ZOOM, the magnification is
changed--
-x1.5/x2 for JPEG files
-x2 for DivX files
NOTE
This function is not available for some JPEG files
depending on their resolution size and JPEG format.
To rotate/reflect a still picture
While a still picture is played back:
·Pressing
2/3 rotates the picture by 90°.
·Pressing
5 reflects the picture vertically.
·Pressing
reflects the picture horizontally.
To select a JPEG file from the thumbnail list
1. Press and hold THUMBNAIL/LIST while a JPEG file
is selected on the Control display.
2. Press
5//2/3 to select the desired picture, then
press ENTER.
· You can change the page of thumbnail list by
pressing
4/¢.
Slide show playback of JPEG files
Press
3(SELECT) while a JPEG file is selected on the
Control display.
· To select slide show effect
Press and hold ANGLE-SLIDE EFFECT until
[SLIDE EFFECT MODE:] and the current mode
appears on the TV screen.
By pressing and holding the button repeatedly, you
can select the effect from 11 effects, random effect
selection (RAND), and no effect (NONE).
The effect is not applied to progressive JPEG files.
13
Initial settings
You can change the settings of this player according to your preferences and playing environment.
How to set the Initial settings
1 Press SET UP.
2 Press
2/3 to select the menu.
3 Press
5/ to move to select the item.
4 Press ENTER.
5 Press
5/ to select the options, then press
ENTER.
To dismiss a preference display
Press SET UP.
NOTES
· Some items in the menus cannot be changed during
playback.
· During MP3 files playback, you cannot show the menus.
· If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
·For settings of the LANGUAGE menu or the PARENTAL
LOCK menu, see also the code lists on the right.
· Depending on the disc, the settings may not apply
correctly.
Item
Contents
MENU LANGUAGE
You can select the default menu language of DVD VIDEO.
AUDIO LANGUAGE
You can select the default audio language of DVD VIDEO.
SUBTITLE
You can select the default subtitle language of DVD VIDEO.
ON SCREEN LANGUAGE You can select "ENGLISH," "CHINESE," or "SPANISH" as the on-screen language.
LANGUAGE menu
PICTURE menu
Item
Contents
MONITOR TYPE
You can select the monitor type to match your TV when you play back DVD VIDEO
discs recorded for wide-screen televisions.
[16:9] (Wide television screen): For a wide-screen (16:9) TV.
[4:3 LB] (Letter Box conversion): For a normal (4:3) TV. Displays a wide-screen
picture to fit the width of the TV screen keeping the aspect ratio.
[4:3 PS] (Pan Scan conversion): For a normal (4:3) TV. The picture is zoomed up
to filling the screen vertically and the left and right sides of the picture are cut off.
PICTURE SOURCE
You can obtain optimal picture quality by selecting the source type of the disc contents.
[AUTO]: Normally, select this option. The player recognizes the picture type (film or
video source) of the current disc according to the disc information.
[FILM]: For a film source disc.
[VIDEO(NORMAL)]: For a video source disc with relatively a few movements.
[VIDEO(ACTIVE)]: For a video source disc with relatively a lot of movements.
SCREEN SAVER
You can set the screen saver function to ON or OFF.
COLOUR SYSTEM
You need to select the color system format according to your TV.
[PAL]: A TV supporting PAL system.
[NTSC]: A TV supporting NTSC system.
[MULTI]: A TV supporting both PAL and NTSC systems. The player outputs a PAL or
NTSC video signal according to the disc.
BACKGROUND
You can use your favorite image as the opening display.
[STANDARD]: Display the JVC original image.
[USER]: Display your favorite image as the opening display when a JPEG image is
registered.
[SAVE AS BACKGROUND]: To register a new image, select this while a JPEG
image is displayed on the TV.
16:9
4:3 LB
4:3 PS
14
AUDIO menu
Item
Contents
DIGITAL AUDIO OUTPUT Set this item correctly according to the logo on your receiver or decoder.
[PCM ONLY]: Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital
recorder.
[DOLBY DIGITAL/PCM]: Receiver/decoder bearing Dolby Digital logo and no DTS.
[STREAM/PCM]: Receiver/decoder bearing both Dolby Digital and DTS logos.
ANALOG DOWNMIX
Set this item properly according to your analog audio connection to play the sound of
the surround multichannel audio on a DVD VIDEO.
[DOLBY SURROUND]: Select this when connecting to a surround decoder.
[STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you want
to record from a DVD VIDEO to a MiniDisc, cassette, etc.
D.RANGE CONTROL
Set this item to listen to DVD VIDEO recorded in Dolby Digital format at low or middle volume.
[WIDE RANGE]: You can enjoy powerful playback sound.
[NORMAL]: Normally, select this.
[TV MODE]: Select this if the sound level of DVD VIDEO is lower than the one of TV
program to make the sound at a lower volume clear.
OUTPUT LEVEL
Set this item to attenuate the level of the signal output from the analog AUDIO OUT
terminals. If the sound from the speaker is distorted, select [LOW].
OTHERS menu
Item
Contents
RESUME
You can select the resume playback mode.
[ON]: The player resumes playback from the position where playback has been
stopped if the disc is still in the disc tray.
[OFF]: This function is deactivated.
[DISC RESUME]: The player resumes playback of the last 10 discs played. The player
retains a memory of the stopped position of each disc even if the disc is removed
from the disc tray.
ON SCREEN GUIDE
Activate or deactivate the on-screen guide.
AUTO STANDBY
Set the time until the player turns off (into standby) automatically if playback is stopped
for more than 30 minutes or 60 minutes.
AV COMPULINK MODE
Set this item correctly when using the AV COMPU LINK system. See "Using the AV
COMPU LINK system" in "Connections."
DivX REGISTRATION
You can confirm of your player's Registration Code for DivX playback.
· Once you played back a disc created by using the Registration Code, the player's
code is overwritten by a totally different new one for copyright protection purpose.
16
Language codes list for the LANGUAGE menu
Specifications
General
Readable discs:
DVD VIDEO, DVD-R (Video format), DVD-RW (Video
format), SVCD, Video CD, Audio CD (CD-DA), CD-R/RW
(CD-DA, SVCD, Video CD, MP3/WMA format, JPEG, DivX)
Video format:
NTSC:
525i/525p
PAL:
625i/625p
Other
Power requirements:
AC 110 V - 240 V
, 50 Hz/60 Hz
(Only for the Australia model: AC 220 V - 240 V
, 50 Hz)
Power consumption:
11.0 W (POWER ON), 1.0 W (STANDBY mode)
Mass: 1.5 kg
Dimensions (W x H x D):
435 mm x 44 mm x 203.5 mm
Video outputs
Component (pin jacks)
Y Output:
1.0 Vp-p (75
)
PB/PR Output: 0.7 Vp-p (75
)
VIDEO (pin jack): 1.0 Vp-p (75
)
S-VIDEO (S jack)
Y Output: 1.0 Vp-p (75
)
C Output: 286 mVp-p (75
)
Horizontal resolution: 500 lines or more
Audio outputs
ANALOG OUT (pin jack): 2.0 Vrms (10 k
)
DIGITAL OUT (COAXIAL): 0.5 Vp-p (75
termination)
Audio characteristics
Frequency response
CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
2 Hz to 22 kHz(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz
Wow and flutter: Unmeasurable (less than ± 0.002%)
Total harmonic distortion: less than 0.009%
·Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
·"DTS" and "DTS Digital Out" are trademarks of Digital
Theater Systems, Inc.
·"Official DivX CertifiedTM product"
"Plays DivX® 5, DivX® 4, DivX® 3, and DivX® VOD
video content (in compliance with DivX CertifiedTM
technical requirements)" "DivX, DivX Certified, and
associated logos are trademarks of DivXNetworks,
Inc. and are used under license."
·This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.
·"CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE `STANDARD DEFINITION' OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER."
AA
Afar
AB
Abkhazian
AF
Afrikaans
AM Ameharic
AR
Arabic
AS
Assamese
AY
Aymara
AZ
Azerbaijani
BA
Bashkir
BE
Byelorussian
BG Bulgarian
BH
Bihari
BI
Bislama
BN
Bengali,Ban-
gla
BO Tibetan
BR
Breton
CA
Catalan
CO Corsican
CS
Czech
CY
Welsh
DA
Danish
DZ
Bhutani
EL
Greek
EO Esperanto
ET
Estonian
EU
Basque
FA
Persian
FI
Finnish
FJ
Fiji
FO
Faroese
FY
Frisian
GA Irish
GD Scots Gaelic
GL
Galician
GN Guarani
GU Gujarati
HA
Hausa
HI
Hindi
HR Croatian
HU Hungarian
HY
Armenian
IA
Interlingua
IE
Interlingue
IK
Inupiak
IN
Indonesian
IS
Icelandic
IW
Hebrew
JI
Yiddish
JW Javanese
KA
Georgian
KK
Kazakh
KL
Greenlandic
KM Cambodian
KN
Kannada
KO Korean (KOR)
KS
Kashmiri
KU
Kurdish
KY
Kirghiz
LA
Latin
LN
Lingala
LO
Laothian
LT
Lithuanian
LV
Latvian,
Lettish
MG Malagasy
MI
Maori
MK Macedonian
ML
Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA
Nauru
NE
Nepali
NL
Dutch
NO Norwegian
OC Occitan
OM (Afan) Oromo
OR Oriya
PA
Panjabi
PL
Polish
PS
Pashto,
Pushto
PT
Portuguese
QU Quechua
RM Rhaeto-
Romance
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA
Sanskrit
SD
Sindhi
SG Sangho
SH
Serbo-
Croatian
SI
Singhalese
SK
Slovak
SL
Slovenian
SM Samoan
SN
Shona
SO Somali
SQ Albanian
SR
Serbian
SS
Siswati
ST
Sesotho
SU
Sundanese
SV
Swedish
SW Swahili
TA
Tamil
TE
Telugu
TG
Tajik
TH
Thai
TI
Tigrinya
TK
Turkmen
TL
Tagalog
TN
Setswana
TO
Tongan
TR
Turkish
TS
Tsonga
TT
Tatar
TW Twi
UK
Ukrainian
UR Urdu
UZ
Uzbek
VI
Vietnamese
VO Volapuk
WO Wolof
XH
Xhosa
YO Yoruba
ZU
Zulu
Specifications and appearance are subject to change without prior notice.
15
Country/Area code list for Parental Lock
PARENTAL LOCK
Select this item, then press ENTER to show the PARENTAL LOCK menu for limiting
playback by children. Scenes which are limited by this function are not played or
replaced with other scenes.
[COUNTRY CODE]: Select the code of your country/area.
[SET LEVEL]: Select the level of restriction. ("1" is the strictest.)
[PASSWORD]: Enter your 4-digit password by pressing the numeric buttons (0 to 9).
[EXIT]: Select this and press ENTER to go back to the OTHERS menu.
Notes:
· Some DVD VIDEO cannot be played by this function. If you try to play such a disc,
the PARENTAL LOCK menu appears on the TV and asks whether you want to
release the lock or not.
To release the lock and play, select "TEMPORARY RELEASE," press ENTER, then
enter your password. Otherwise, eject the disc.
· To change the setting of the limitation, you need to enter your password.
· If you forget your password, enter "8888."
SET LEVEL
NONE
PASSWORD
_ _ _ _
PARENTAL LOCK
EXIT
COUNTRY CODE
MY
AD Andorra
AE United Arab
Emirates
AF Afghanistan
AG Antigua and
Barbuda
AI
Anguilla
AL Albania
AM Armenia
AN Netherlands
Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American
Samoa
AT Austria
AU Australia
AW Aruba
AZ Azerbaijan
BA Bosnia and
Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
BI
Burundi
BJ
Benin
BM Bermuda
BN Brunei
Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling)
Islands
CF Central African
Republic
CG Congo
CH Switzerland
CI
Côte d'Ivoire
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican
Republic
DZ Algeria
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
ES Spain
ET Ethiopia
FI
Finland
FJ
Fiji
FK Falkland Islands
FM Micronesia
(Federated
States of)
FO Faroe Islands
FR France
FX France,
Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
GE Georgia
GF French Guiana
GH Ghana
GI
Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial
Guinea
GR Greece
GS South Georgia
and the South
Sandwich
GT Guatemala
GU Guam
GW Guinea-Bissau
GY Guyana
HK Hong Kong
HM Heard Island
and McDonald
Islands
HN Honduras
HR Croatia
HT Haiti
HU Hungary
ID
Indonesia
IE
Ireland
IL
Israel
IN
India
IO
British Indian
Ocean Territory
IQ
Iraq
IR
Iran (Islamic
Republic of)
IS
Iceland
IT
Italy
JM Jamaica
JO Jordan
JP
Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
KI
Kiribati
KM Comoros
KN Saint Kitts and
Nevis
KP Korea,
Democratic
People's
Republic of
KR Korea, Republic
of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
LA Lao People's
Democratic
Republic
LB Lebanon
LC Saint Lucia
LI
Liechtenstein
LK Sri Lanka
LR Liberia
LS Lesotho
LT
Lithuania
LU Luxembourg
LV Latvia
LY Libyan Arab
Jamahiriya
MA Morocco
MC Monaco
MD Moldova,
Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
MP Northern
Mariana Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
MX Mexico
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
NF Norfolk Island
NG Nigeria
NI
Nicaragua
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French
Polynesia
PG Papua New
Guinea
PH Philippines
PK Pakistan
PL Poland
PM Saint Pierre and
Miquelon
PN Pitcairn
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian
Federation
RW Rwanda
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
SI
Slovenia
SJ
Svalbard and Jan
Mayen
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
SO Somalia
SR Suriname
ST Sao Tome and
Principe
SV El Salvador
SY Syrian Arab
Republic
SZ Swaziland
TC Turks and
Caicos Islands
TD Chad
TF French Southern
Territories
TG Togo
TH Thailand
TJ
Tajikistan
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
TT Trinidad and
Tobago
TV Tuvalu
TW Taiwan
TZ Tanzania,
United Republic
of
UA Ukraine
UG Uganda
UM United States
Minor Outlying
Islands
US United States
UY Uruguay
UZ Uzbekistan
VA Vatican City
State (Holy See)
VC Saint Vincent
and the
Grenadines
VE Venezuela
VG Virgin Islands
(British)
VI
Virgin Islands
(U.S.)
VN Vietnam
VU Vanuatu
WF Wallis and
Futuna Islands
WS Samoa
YE Yemen
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
ZW Zimbabwe
XV-N422[A]5.indd 2
XV-N422[A]5.indd 2
3/11/05 2:31:16 PM
3/11/05 2:31:16 PM