E-1
INSTRUCTIONS
COLOUR VIDEO CAMERA
LWT0276-001A-H
BF LOOK
COLOR
VIDEO
CAMERA
DIGITAL
TK-C1430
TK-C1431
TK-C1430_01-05_E
05.6.20, 10:40 AM
1
E-2
IMPORTANT SAFEGUARDS
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use attachments not recommended by the appliance manufacturer as
they may cause hazards.
6. Do not use this appliance near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table.
The appliance may fall, causing serious injury to a child or
adult, and serious damage to the appliance.
Use only with a car t or stand recommended by the
manufacturer, or sold with the appliance.Wall or shelf mounting
should follow the manufacturer's instructions, and should use
a mounting kit approved by the manufacturer. An appliance
and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are pro-vided for
ventilation, and to insure reliable operation of the appliance and to protect it from
overheating, these openings must not be blocked or covered.The openings should
never be blocked by placing the appliance on a bed, sofa, rug, or other similar
surface.
This appliance should never be placed near or over a radiator or heat register.
This appliance should not be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
9. This appliance should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supplied to your
home, consult your dealer or local power company. For appliance designed to
operate from battery power, refer to the operating instructions.
10.This appliance system is equipped with a 3-wire grounding type plug (a plug
having a third (grounding) pin). This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding plug.
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.
TK-C1430_01-05_E
05.6.20, 10:40 AM
2
E-3
11.For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it form the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
12.Do not allow anything to rest on the power cord. Do not locate this appliance
where the cord will be abused by persons walking on it.
13.Follow all warnings and instructions marked on the appliance.
14.Do not overload wall outlets and extension cords as this can result in fire or
electric shock.
15.Never push objects of any kind into this appliance through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a fire
or electric shock. Never spill liquid of any kind on the appliance.
16.Do not attempt to service this appliance yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
17.Unplug this appliance from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instruc-
tions. Adjust only those controls that are covered by the operating instructions
as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the appliance to
normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f. When the appliance exhibits a distinct change in performance - this indicates
a need for service.
18.When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
19.Upon completion of any service or repairs to this appliance, ask the service
technician to perform routine safety checks to determine that the appliance is in
safe operating condition.
TK-C1430_01-05_E
05.6.20, 10:40 AM
3
E-4
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK, DO
NOT
EXPOSETHIS APPLIANCE TO RAIN
OR MOISTURE.
Due to design modifications, data given in this
instruction book are subject to possible change
without prior notice.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D'INCENDIE OU D'ELECTRO-
CUTION,
NE
PAS
EXPOSER
L'APPAREIL A L'HUMIDITE OU A LA
PLUIE.
Safety Precautions
TK-C1430_01-05_E
05.6.20, 10:40 AM
4
E-5
Thank you for purchasing this product.
(These instructions are for TK-C1430E and TK-C1431EG)
Before beginning to operate this unit, please read the instruction manual
carefully in order to make sure that the best possible performance is obtained.
CONTENTS
INTRODUCTION
Features ............................................................................................................................... 6
Operating Precautions ......................................................................................................... 7
Controls, Connectors and Indicators ................................................................................... 8
CONNECTION/INSTALLATION
RM-P2580 System ............................................................................................................. 12
Procedures ........................................................................................................................ 14
Mounting the lens .............................................................................................................. 15
Installing the ferrite core .................................................................................................... 16
Connections on the back ................................................................................................... 16
Mounting the camera ......................................................................................................... 18
Lens adjustment ................................................................................................................ 20
Back focus adjustment ...................................................................................................... 21
Auto white balance control adjustment ............................................................................. 22
MENU SETTING
Setting the menu ............................................................................................................... 23
The flow of menu screen ................................................................................................... 24
SYNC ADJUST Screen ..................................................................................................... 26
ALC SETTINGS Screen .................................................................................................... 26
VIDEO ADJUST Screen .................................................................................................... 31
MODE SELECT Screen .................................................................................................... 32
MOTION DETECT Screen ................................................................................................. 34
COMMUNICATION Screen ............................................................................................... 35
MAINTENANCE Screen .................................................................................................... 35
FACTORY SETTINGS Screen .......................................................................................... 35
BLC EDITTING Screen ..................................................................................................... 36
Manual Adjustment of White Balance ............................................................................... 37
CAMERA TITLE Setting .................................................................................................... 38
Setting the MOTION DETECT Function ........................................................................... 39
Output of Black-White/Colour switching signal ................................................................. 40
Control by Black-White/Colour switching signal from the outside .................................... 41
White spot compensation .................................................................................................. 42
OTHERS
Specifications ..................................................................................................................... 43
TK-C1430_01-05_E
05.6.20, 10:40 AM
5