JVC NX-CDR7 - Owner's Manual Immediate Download

INSTRUCTIONS

MANUEL D'INSTRUCTIONS

NX-CDR7

For Customer Use:

Enter below the Model No. and Serial

No. which are located either on the rear,

bottom or side of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

LVT0749-002A

[J(C)]

COMPACT COMPONENT CDR SYSTEM

SYSTEME CDR DE COMPOSANTS COMPACT

STANDBY

COMP ACT COMPONENT CDR SYSTEM

NX-CD R 7 R

SOURCE

OPEN/CLOSE

CDR

VOLUME

CD3

CD2

CD1

3CD Changer System, Play & Exchange

3CD

DISC

CD

CDR

FINALIZE

DIRECT REC

REC PAUSE

FADE IN/OUT

REC MUTE

PHONES

COMPACT

TEXT

DIGITAL AUDIO

COMPACT

Recordable

ReWriteble

DIGITAL AUDIO

;;;;;;;;;;;;;;;;;;;;;;

yyyyyyyyyyyyyyyyyyyyyy

;;;;;;;;;;;;;;;;;;;;;;

yyyyyyyyyyyyyyyyyyyyyy

STANDBY/ON

DISPLAY

CANCEL

SET

ENTER

RM-SNXCDR7J REMOTE CONTROL

MENU

A.P.off

CLOCK

/TIMER

SLEEP

BASS

SOUND

VOLUME

PITCH

REPEAT

FM/PLAY

MODE

AUTO PRESET

10

+10

12

3

45

6

78

9

SP-NXCDR7

CA-NXCDR7

SP-NXCDR7

-- Consists of CA-NXCDR7 and SP-NXCDR7

-- Composé du CA-NXCDR7 et SP-NXCDR7

COVER_NX-CDR7[J_C]_4

01.9.14, 3:40 PM

1

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure

that

may

be

of

sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence

of

important

operating

and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.

Do not remove screws, covers or cabinet.

2.

Do not expose this appliance to rain or moisture.

ATTENTION

Afin d'éviter tout risque d'électrocution, d'incendie, etc.:

1.

Ne pas enlever les vis ni les panneaux et ne pas

ouvrir le coffret de l'appareil.

2.

Ne pas exposer l'appareil à la pluie ni à l'humidité.

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

Caution STANDBY/ON

button!

Disconnect the mains plug to shut the power off completely.

The STANDBY/ON

button in any position does not

disconnect the mains line. The power can be remote

controlled.

Attention Commutateur STANDBY/ON

!

Déconnecter la fiche de secteur pour couper

complètement le courant. Le commutateur STANDBY/

ON

ne coupe jamais complètement la ligne de

secteur, quelle que soit sa position. Le courant peut être

télécommandé.

IMPORTANT FOR LASER PRODUCTS

1.

CLASS 1 LASER PRODUCT

2.

DANGER: Invisible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to

beam.

3.

CAUTION: Do not open the top cover. There are no user

serviceable parts inside the Unit; leave all servicing to

qualified service personnel.

1.

PRODUIT LASER CLASSE 1

2.

ATTENTION: Radiation laser invisible quand l'appareil

est ouvert ou que le verrouillage est en panne ou

désactivé. Eviter une exposition directe au rayon.

3.

ATTENTION: Ne pas ouvrir le couvercle du dessus. Il n'y

a aucune pièce utilisable à l'intérieur. Laisser à un

personnel qualifié le soin de réparer votre appareil.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer's attention to Section 820-40 of the NEC

which provides guidelines for proper grounding and,

in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

Warnings, Cautions and Others

Mises en garde, précautions et indications diverses

G-1

COVER_NX-CDR7[J_C]_4

01.9.14, 3:40 PM

2

For U.S.A.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions,

may

cause

harmful

interference

to

radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS

LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQUAU FOND.

For Canada/pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS

B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL

APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING

EQUIPMENT STANDARD ENTITLED "DIGITAL APPARATUS,"

ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.

CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE

BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS

NUMIRIQUES DE CLASSE B PRESCRITES DANS LA NORME

SUR

LE

MATERIEL

BROUILLEUR:

"APPAREILS

NUMERIQUES", NMB-003 EDICTEE PAR LE MINISTRE DES

COMMUNICATIONS.

G-2

English

Français

COVER_NX-CDR7[J_C]_4

01.9.14, 3:40 PM

3

1

English

Contents

Recording on a CD-R/CD-RW .................... 28

Before You Start Recording ................................. 29

Recording Any Sound Source

--Standard Recording ................................... 31

Recording from 3-CD Changer

--CD Synchronized Recording ...................... 33

· CD Direct Recording ................................. 33

· First Track Recording ................................ 35

· Listening Edit Recording ........................... 36

Recording the External Components

--Sound Synchronized Recording ................ 37

Recording a Single Track during Play ................. 38

Finalizing a Disc--CD-R/CD-RW ...................... 38

Other Convenient CDR Functions .............. 39

Recording Track Marks Manually

--Manual Track-Marking .............................. 40

Separating Recorded Tracks Automatically

--Auto-Track Space ...................................... 41

Turning On or Off Sampling Frequency Rate

Converter ....................................................... 41

Recording Skip Marks onto a CD-R/CD-RW ........ 42

Erasing Tracks (Only for CD-RW) ...................... 42

Erasing All Tracks (Only for CD-RW) ................ 43

Unfinalizing a Disc (Only for CD-RW) ............... 43

Using the Timers ........................................... 44

Setting the Clock .................................................. 45

Using Recording Timer ........................................ 45

Using Daily Timer ............................................... 47

Using Sleep Timer ............................................... 49

Using Auto Power Off .......................................... 49

Maintenance .................................................. 50

Glossary ......................................................... 51

Messages ........................................................ 52

Troubleshooting ............................................ 53

Specifications ................................................. 54

Introduction .................................................... 2

About This Manual ................................................ 2

Precautions ............................................................. 2

Precautions on Disc Playback and Recording ....... 3

Location of the Buttons and Controls ........... 4

Remote Control ...................................................... 4

Main Unit ............................................................... 5

Display Window ..................................................... 6

Getting Started ................................................ 8

Unpacking .............................................................. 8

Connecting Antennas ............................................. 8

Connecting Speakers .............................................. 9

Connecting Other Components ............................ 10

Putting the Batteries into the Remote Control ..... 12

Basic and Common Operations ................... 13

Turning On the Power .......................................... 14

Saving the Power Consumption while

On Standby .................................................... 14

Selecting the Sources and Starting Play .............. 14

Adjusting the Volume ........................................... 15

Changing the Display Information ...................... 15

Reinforcing the Bass Sound ................................. 15

Selecting the Sound Modes .................................. 16

Creating Your Own Sound Modes

--MANUAL Modes ...................................... 16

Listening to FM and AM Broadcasts .......... 17

Tuning into a Station ............................................ 18

Presetting Stations ................................................ 18

Tuning into a Preset Station ................................. 19

Playing Back Discs on 3-CD Changer ........ 20

Loading Discs ...................................................... 21

Playing Back the Entire Discs

--Continuous Play ......................................... 21

Basic Disc Operations .......................................... 22

Programing the Playing Order of the Tracks

--Program Play ............................................. 22

Playing at Random--Random Play ..................... 23

Repeating Tracks or Discs--Repeat Play ............ 24

Other Convenient Functions ................................ 24

Playing Back a Disc on CD Recorder ......... 26

Playing Back a Disc--Normal Play ..................... 27

Basic Disc Operations .......................................... 27

Repeating Tracks--Repeat Play .......................... 27

EN01-12_NX-CDR7[J_C]_4

01.9.14, 3:41 PM

1

2

English

Introduction

About This Manual

This manual is organized as follows:

· This manual mainly explains playback operations

using the remote control, and the other operation

such as recording and editing operations using the

buttons and controls on the unit.

You can use the buttons and controls both on the

remote control and on the unit for the same

operations if they have the same or similar names (or

marks), unless mentioned otherwise.

· Basic and common information that is the same for

many functions is grouped in one place, and is not

repeated in each procedure. For instance, we do not

repeat the information about turning on/off the unit,

setting the volume, changing the sound effects, and

others, which are explained in the section "Basic and

Common Operations" on pages 13 16.

· The following marks are used in this manual:

Gives you warning and caution to prevent

from damage or risk of fire/electric shock.

Furthermore, gives you information which

is not good for obtaining the best possible

performance from the unit.

Gives you information and hints you had

better know.

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to

obtain the best possible performance from your unit, and retain this manual

for future reference.

Precautions

Installation

· Install in a place which is level, dry and neither too hot

nor too cold--between 5°C (41°F) and 35°C (95°F).

· Install the unit in a location with adequate ventilation to

prevent internal heat buildup in the unit.

· Leave sufficient distance between the unit and the TV.

· Keep the speakers away from the TV to avoid

interference with TV.

DO NOT install the unit in a location near heat

sources, or in a place subject to direct sunlight,

excessive dust or vibration.

Power sources

· When unplugging the unit from the wall outlet, always

pull the plug, not the AC power cord.

DO NOT handle the AC power cord with wet

hands.

Moisture condensation

Moisture may condense on the lens inside the unit in the

following cases:

· After starting heating in the room

· In a damp room

· If the unit is brought directly from a cold to a warm place

Should this occur, the unit may malfunction. In this case,

leave the unit turned on for a few hours until the moisture

evaporates, unplug the AC power cord, then plug it in

again.

Others

· Should any metallic object or liquid fall into the unit,

unplug the AC power cord and consult your dealer before

operating any further.

· If you are not going to operate the unit for an extended

period of time, unplug the AC power cord from the wall

outlet.

DO NOT disassemble the unit since there are no

user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

Continued

EN01-12_NX-CDR7[J_C]_4

01.9.14, 3:41 PM

2