ENGLISH
GET0157-001A
[J]
ESP
A
ÑOL
FRANÇAIS
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
CD RECEIVER
KD-SX60WT/KD-SX50M
RECEPTOR CON CD
KD-SX60WT/KD-SX50M
RECEPTEUR CD
KD-SX60WT/KD-SX50M
KD-SX60WT
180W
KD-SX50M
180W
COMPACT
DIGITAL AUDIO
KD-SX60WT
KD-SX50M
Cover_KD-SX60WT_50M[J]f.p65
3/26/03, 4:09 PM
3
2
ENGLISH
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT FOR LASER PRODUCTS
Precautions:
1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all
servicing to qualified service personnel.
4. CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches
to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
5. CAUTION: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
How to reset your unit
While holding SEL (select), press
(standby/on/attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
Notes:
· Your preset adjustments--such as preset channels or
sound adjustments--will also be erased.
· If a disc is in the unit, it will eject when you reset the unit.
Be careful not to drop the disc.
(standby/on/attenuator)
SEL (select)
BEFORE USE
*For safety....
· Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
· Stop the car before performing any complicated
operations.
EN02-03_KD-SX60WT_50M[J]f.p65
3/26/03, 4:09 PM
2
3
ENGLISH
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
OTHER MAIN FUNCTIONS ................ 15
Selecting the level meter ........................... 15
Selecting the external component ............. 15
Detaching the control panel ...................... 16
CD CHANGER OPERATIONS .............. 17
About MP3 discs ....................................... 17
Playing discs ............................................. 18
Selecting the playback modes .................. 20
EXTERNAL COMPONENT
OPERATIONS ............................. 21
Playing an external component ................. 21
TROUBLESHOOTING ...................... 22
MAINTENANCE ............................. 24
Handling discs ........................................... 24
SPECIFICATIONS ........................... 25
How to reset your unit ...............................
2
How to use the M (MODE) button .............
3
LOCATION OF THE BUTTONS ............
4
Control panel .............................................
4
BASIC OPERATIONS .......................
5
Turning on the power ................................
5
Setting the clock ........................................
6
RADIO OPERATIONS ......................
7
Listening to the radio .................................
7
Storing stations in memory .......................
8
Tuning in to a preset station ......................
9
CD OPERATIONS ........................... 10
Playing a CD ............................................. 10
Locating a track or a particular portion
on a CD .................................................. 11
Selecting CD playback modes .................. 12
Prohibiting CD ejection ............................. 12
SOUND ADJUSTMENTS ................... 13
Selecting preset sound modes
(C-EQ: custom equalizer) ....................... 13
Adjusting the sound .................................. 14
Time countdown indicator
How to use the M (MODE) button
If you press M (MODE), the unit goes into functions mode, then the number buttons and
5/ buttons
work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
To use these buttons for original functions again after pressing M (MODE), wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
· Pressing M (MODE) again also clears the functions mode.
EN02-03_KD-SX60WT_50M[J]f.p65
3/26/03, 4:09 PM
3
ENGLISH
4
LOCATION OF THE BUTTONS
u E (EQ: equalizer) button
i CD (CD-CH: CD changer) button
o
(control panel release) button
Display window
; LOUD (loudness) indicator
a EQ (equalizer) indicator
s CDin indicator
d CD or CD-CH (CD changer) indicator
f FM band indicators (FM1, FM2, FM3)
g AM band indicator
h Tuner reception indicators
MO (monaural), ST (stereo)
j Volume (or audio) level indicator
k MP3 indicator
· Lights up only when playing an MP3 disc on a
JVC MP3-compatible CD changer.
l
(disc) indicator
/ Main display
z RND (random) indicator
x RPT (repeat) indicator
Control panel
1
(standby/on/attenuator) button
2 SEL (select) button
3 Control dial
4 Display window
5 Loading slot
6
4
/
¢
buttons
7 FM/AM button
8
5 (up) button
+10 button
9
0 (eject) button
p
(down) button
10 button
q DISP (display) button
· Also functions as SSM buttons when pressed
together with M (MODE) button.
w M (MODE) button
· Also functions as SSM buttons when pressed
together with DISP (display) button.
e MO (monaural) button
r RPT (repeat) button
t RND (random) button
y Number buttons
Display window
EN04-04_KD-SX60WT_50M[J]f.p65
3/26/03, 4:06 PM
4
5
ENGLISH
4 Adjust the sound as you want.
(See pages 13 and 14.)
To drop the volume in a moment
Press
briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
· If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
for more than one
second.
"SEE YOU" appears, then the unit turns off.
· If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
Turning on the power
1 Turn on the power.
Note on One-Touch Operation:
When you select a source in step
2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2 Select the source.
To operate the tuner (FM or AM),
see pages 7 9.
To play a CD,
see pages 10 12.
To operate the CD changer,
see pages 17 20.
To operate the external component (LINE IN),
see page 21.
3 Adjust the volume.
BASIC OPERATIONS
Volume (or audio) level indicator
(see page 15)
Volume level appears.
To increase the volume
To decrease the volume
2
1
3
EN05-06_KD-SX60WT_50M[J]f.p65
3/26/03, 4:08 PM
5