background image
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD
SERVICE MANUAL
General
Power requirements
AC 200-240V, 50/60 Hz
Power consumption
Operation mode : 23W
Standby mode : 6.7W
Dimensions (approx.)
430 X 97.5 X 293 mm (w/h/d)
Mass (approx.)
4.8 kg
Operating temperature 5°C to 35°C (41°F to 95°F)
Operating humidity
5 % to 90 %
Timer
24 hours display tape
Program capacity
1 month 7 program
RF Modulator
UHF 22-68 (Adjustable)
System
Laser
Semiconductor laser, wavelength 650 nm
Video Head system
Double azimuth 4 heads, helical scanning.
Signal system
PAL
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
More than 100dB (ANALOG OUT connectors only)
Harmonic distortion
Less than 0.008%
Dynamic range
More than 100 dB (DVD)
More than 95 dB (CD)
Inputs (VCR)
Audio
-6.0dBm, more than 10 kohms (SCART)
-6.0dBm, more than 47 kohms (RCA)
Video
1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA)
Outputs (DVD)
S-VIDEO OUT
(Y) 1.0 Vp-p 75 ohms, negative sync., Mini Din 4-pin x 1
(C) 0.3 Vp-p 75 ohms
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75
, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75
, RCA jack x 2
Audio output (digital audio)
0.5 V (p-p), 75
, RCA jack x 1
Audio output (optical audio)
5 V (p-p), 75
, Optical connector x 1
Audio output (analog audio)
2.0 Vrms (1 kHz, 0 dB), 330
, RCA jack (L, R) x 2/SCART(TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p, 75 ohms, unbalanced (SCART)
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. " Dolby" and double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and
pending. " DTS" and " DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Copyright 1996 Digital Theater Systems, Inc.
All rights reserved.
No.82985
2003/06
HR-XV2EK
HR-XV2EK D2VP11
DVD PLAYER / VIDEO CASSETTE RECORDER
SPECIFICATIONS
PAL
VCR
DVD
POWER
DVDMENU MEMORY
SUBTITLE
ANGLE
REPEATA-B
ZOOM
SEARCH
TITLE
REPEAT
SHOWVIEW
VIDEOPlus+
TV
TV
TV/VCR
TV/VCR PR +
CANCEL
TV/VCR PR
0000
AUDIO
MONITOR
PROG.
TV
12
3
45
6
7
0
89
RANDOM
DISPLAY
EJECT
RETURN
OK
AUX


background image
CONTENTS
SECTION 1 . . . . SUMMARY
SECTION 3 . . . . ELECTRICAL
SECTION 4 . . . . MECHANISM OF VCR PART
SECTION 5 . . . . MECHANISM OF DVD PART
SECTION 6 . . . . REPLACEMENT PARTS LIST


background image
SECTION 1
SUMMARY
CONTENTS
Safety Precautions
SPECIFICATIONS ................................................................................................... 1-5


background image
Safety Precautions
1. This design of this product contains special hardware and many circuits and components specially
for safety purposes.
For continued protection, no changes should be made to the original
design unless authorised in writing by the manufacturer.
Replacement parts must be identical to
those used in the original circuits.
2. Any unauthorised design alterations or additions will void the manufacturer's guarantee ; furthermore the
manufacturer cannot accept responsibility for personal injury or property damage resulting therefrom.
3. Essential safety critical components are identified by (
) on the Parts List and by shading on the
schematics, and must never be replaced by parts other than those listed in the manual. please note
however that many electrical and mechanical parts in the product have special safety related
characteristics. These characteristics are often not evident from visual inspection. Parts other than
specified by the manufacturer may not have the same safety characteristics as the recommended
replacement parts shown in the Parts List of the Service manual and may create shock, fire, or
other hazards.
4. The leads in the products are routed and dressed with ties, clamps, tubings, barriers and the
like to be separated from live parts, high temperature parts, moving parts and/or sharp edges
for the prevention of electric shock and fire hazard.
When service is required, the original lead
routing and dress should be observed, and it should be confirmed that they have been returned
to normal, after re-assembling.
Warning
1. Service should be performed by qualified personnel only.
2. This equipment has been designed and manufactured to meet international safety standards.
3. It is the legal responsibility of the repairer to ensure that these safety standards are maintained.
4. Repairs must be made in accordance with the relevant safety standards.
5. It is essential that safety critical components are replaced by approved parts.
6. If mains voltage selector is provided, check setting for local voltage.
S40892-01


background image
1-5
SPECIFICATIONS
DVD PART
Power supply
AC 110~240V, 50/60 Hz(HR-XV2ER)
AC 200~240V, 50/60 Hz(HR-XV2EX/HR-XV2EY/
HR-XV2EL/HR-XV11EX/ HR-XV2EK/HR-XV2EF/HR-XV2EZ)
Power consumtion
23W
Mass
5.4kg
External dimensions
430 x 97.5 x 293 (W x H x D)
Signal system
PAL 625/50
Laser
Semiconductor laser, wavelength 650nm
Frequency range (digital audio)
4 Hz to 20 kHz
Signal-to-noise ratio (digital audio)
More than 100 dB (EIAJ)
Audio dynamic range (digital audio)
More than 95 dB (EIAJ)
Harmonic distortion(digital audio)
0.008%
Wow and flutter
Below measurable level (less than +0.001%(W.PEAK)) (EIAJ)
Operations
Temperature : 5°C(41°F) to 35°C(95°F),
Operation status : Horizontal
OUTPUTS
Video outputs
.0V(p-p), 75
, negative sync., RCA jack x 1/SCART(TO TV)
S video outputs
1
(Y)1.0V(p-p), 75
, negative sync.,Mini DIN 4-pin x 1
(C)0.3V(p-p), 75
Component video output
(Y) 1.0 V (p-p), 75
, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75
Audio output(digital audio)
0.5V(p-p), 75
, RCA jack X 1/SCART(TO TV)
Audio output(optical audio)
Optical connector x 1
Audio output(analog audio)
2.0Vrms (1kHz, 0dB), 330
, RCA jack (L, R) x 1/
SCART(TO TV)
VHS PART
Video Head System
Double azimuth 4 heads, helical scanning
Tape format
Tape width 12.7 mm (0.5 inch)
Timer
24 hours display type
*Designs and specifications are subject to change without notice.
*Weight and dimensions shown are approximate.