background image
--1--
January 24, 2003 11:21 am
Page 1
ENGLISH
Master Page: Cover
VIDEO CASSETTE RECORDER
HR-V600E
HR-V601E
INSTRUCTIONS
LPT0750-001B
PrintedinGermany
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.
1202-AH-PJ-JVE
SAFETY FIRST ............................................................................... 1
Buttons, Connectors and Indicators ................................................ 3
Basic Connections.......................................................................... 4
Initial Settings .............................................................................. 4
Auto Set Up............................................................................ 4
Preset Download .................................................................... 5
Language Set .......................................................................... 5
T-V Link Functions......................................................................... 5
Satellite Receiver Control Set ........................................................ 5
Playback ...................................................................................... 6
Recording..................................................................................... 8
Timer Recording............................................................................ 9
SHOWVIEW® Timer Programming............................................. 9
Express Timer Programming.................................................... 9
Checking, cancelling or changing programme settings ......... 10
Program overlap warning display.......................................... 10
Automatic Satellite Programme Recording ............................ 10
Editing ....................................................................................... 11
Editing with another video recorder or a camcorder ............. 11
System Connections .................................................................... 11
Connecting to a satellite receiver .......................................... 11
Connecting/Using a decoder ................................................ 11
Connecting/Using a stereo system ........................................ 11
Subsidiary Settings ..................................................................... 11
Mode Set.............................................................................. 11
Clock Set .............................................................................. 13
Tuner Set .............................................................................. 13
Video Channel Set................................................................ 15
Specifications.............................................................................. 16
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SAFETY FIRST
CAUTION
When you are not using the recorder for a long period of
time, it is recommended that you disconnect the power cord
from the mains outlet.
Dangerous voltage inside. Refer internal servicing to qualified
service personnel. To prevent electric shock or fire hazard,
remove the power cord from the mains outlet prior to
connecting or disconnecting any signal lead or aerial.
WARNING
There are two different types of SECAM colour systems:
SECAM-L, used in FRANCE (also called SECAM-West), and
SECAM-B, used in Eastern European countries (also called
SECAM-East).
1. This recorder can also receive SECAM-B colour television
signals for recording and playback.
2. Recordings made of SECAM-B television signals produce
monochrome pictures if played back on a video recorder of
SECAM-L standard, or do not produce normal colour
pictures if played back on a PAL video recorder with
SECAM-B system incorporated (even if the TV set is SECAM-
compatible).
3. SECAM-L prerecorded cassettes or recordings made with a
SECAM-L video recorder produce monochrome pictures
when played back with this recorder.
4. This recorder cannot be used for the SECAM-L standard. Use
a SECAM-L recorder to record SECAM-L signals.
IMPORTANT
Please read the various precautions on pages 1 and 2 before
installing or operating the recorder.
It should be noted that it may be unlawful to re-record pre-
recorded tapes, records, or discs without the consent of the
owner of copyright in the sound or video recording, broadcast
or cable programme and in any literary, dramatic, musical, or
artistic work embodied therein.
For Italy:
"It is declared that this product, brand JVC, conforms to the
Ministry Decree n. 548 of 28 Aug.'95 published in the Official
Gazette of the Italian Republic n. 301 of 28 Dec.'95"
The STANDBY/ON 1 button does not completely shut off
mains power from the unit, but switches operating current on
and off. "`" shows electrical power standby and " ! " shows
ON.
Video tapes recorded with this video recorder in the LP (Long
Play) mode cannot be played back on a single-speed video
recorder.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated. Do not recharge, disassemble, heat
above 100°C or incinerate.
Replace battery with CR2032. Panasonic (Matsushita Electric)
or Maxell is recommended.
Danger of explosion or Risk of fire if the battery is incorrectly
replaced.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
HR-V600_001EN.fm Page 1 Friday, January 24, 2003 11:21 AM


background image
January 24, 2003 11:21 am
Page 2
-- 2 --
Master Page: Right
Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings in the SP
mode with regular VHS resolution.
HQ VHS is compatible with existing VHS equipment.
SHOWVIEW is a registered trademark of Gemstar Development
Corporation. The SHOWVIEW system is manufactured under
licence from Gemstar Development Corporation.
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Failure to heed the following precautions may result in damage to
the recorder, remote control or video cassette.
1. DO NOT place the recorder ...
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the recorder's ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the recorder or remote
control.
4. DO NOT place anything which might spill on top of the
recorder or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus to dripping or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
7. DO NOT place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID violent shocks to the recorder during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you move
it from a cold place to a warm place, or under extremely humid
conditions--just as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensation
may occur, keep the recorder's power turned on for a few hours to
let the moisture dry.
How to use the remote control
Before use, insert the lithium
battery -- CR2032 --
correctly, with the plus(+) side
up into the battery
compartment. To open it, press
the release tab and carefully,
pull the compartment out.
The remote control can
operate most of your recorder's functions, as well as basic
functions of JVC TVs.
Point the remote control towards the remote sensor on the target
component. The maximum operating distance is about 8 m.
To operate a JVC TV, use any of the following buttons: TV 1,
TV
, TV PR +/­ or TV %+/­.
NOTE:
If the remote control does not work properly, remove its battery,
wait for a few seconds, replace the battery and then try again.
Video heads cleaning
The heads get dirty in the following cases:
in an environment prone to extreme temperature or humidity
in a dusty environment
flaw, dirt or mold on video tapes
continuous usage for a long time
Use a dry cleaning cassette -- TCL-2 -- when:
Rough, poor picture appears while a tape is played back.
The picture is unclear or no picture appears.
"USE CLEANING CASSETTE" appears on the screen (only with
"O.S.D." set to "ON" (
12)).
Usable cassettes
Compact VHS camcorder recordings can
be played on this recorder. Simply place
the recorded cassette into a VHS Cassette
Adapter and it can be used just like any
full-sized VHS cassette.
This recorder is equipped with SQPB (S-VHS QUASI
PLAYBACK) that lets you watch tapes recorded in the S-VHS
format and the SP mode with regular VHS resolution.
* SQPB does not deliver Super VHS resolution.
This recorder can record on regular VHS and Super VHS
cassettes. However, it will record regular VHS signals only.
* S-VHS recording is not possible with this recorder.
ATTENTION:
TO MOBILE PHONE USER:
Using a mobile phone in the vicinity of the recorder may cause
picture vibration on the TV screen or change the screen to a
blue back display.
ON PLACING THE RECORDER:
Some TVs or other appliances generate strong magnetic fields.
DO NOT place such appliance on top of the recorder as it may
cause picture disturbance.
Release
tab
HR-V600_001EN.fm Page 2 Friday, January 24, 2003 11:21 AM


background image
January 24, 2003 11:21 am
Page 3
-- 3 --
Master Page: Right
Front Panel
Rear Panel
Remote control
* PDC recording is not possible in Central and Eastern Europe.
On-screen display
If you press
(OK ) on the remote control when "O.S.D." is set to
"ON" (
12), you can see the current recorder status on the
screen. To clear the on-screen display, press
(OK ) again.
The indications are not recorded even if the recorder is in the
recording mode.
A Recorder operation mode
B Tape speed
C Tape direction
D Time counter
E Tape remaining time
F Audio mode
G Tape position*
* The position of " q" in relation to "0" (Beginning) or "+" (End) shows
the current position on the tape.
H VPS/PDC* indicator
* PDC recording is not possible in Central and Eastern Europe.
I Type of broadcast
J Current day/month/year
K Clock
L Channel and auxiliary input
M Cassette loaded mark
Buttons, Connectors and Indicators
Cassette loading slot
Display panel
Play indicator
Record
indicator
Timer mode indicator
Channel and auxiliary input/
Clock time*
Infrared beam
receiving window
SAT# indicator
REVIEW
indicator
VCR indicator
* Each time you press ­­:­ ­, the display panel shows the channel
number and the clock time alternatively.
Pause 9 [SAT#]
Play 4
Record7
Rewind
3
Fast
Forward
5
Stop/Eject
0
PR+/­
Mains power cord
number keys
HR-V600_001EN.fm Page 3 Friday, January 24, 2003 11:21 AM


background image
January 24, 2003 11:21 am
Page 4
-- 4 --
Master Page: Right
A Check contents
Make sure the package contains all of the accessories listed in
"Specifications" (
16).
B Situate recorder
Place the recorder on a stable, horizontal surface.
C Connect recorder to TV
RF Connection
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the ANT. IN connector on the
rear of the recorder.
C Connect the provided RF cable between the RF OUT
connector on the rear of the recorder and the TV's aerial
connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector, perform
AV connection to improve picture quality during tape playback.
A Connect the aerial, recorder and TV as shown in the
illustration.
B Connect an optional 21-pin SCART cable between the L-1 IN/
OUT connector on the rear of the recorder and the TV's 21-pin
SCART connector.
D Connect recorder to mains
Plug the mains power cord into a mains outlet.
After the 1 is pressed for the first time to power on the recorder,
the recorder starts Auto Set Up or Preset Download.
ATTENTION:
If you have connected the recorder to a TV offering T-V Link via a
fully-wired 21-pin SCART cable and if the TV is turned on, the
recorder automatically performs the Preset Download (
5) even
if you perform Auto Set Up.
Before starting:
Perform "Basic Connections".
Set the TV to its AV mode (with AV connection) or UHF
channel 36 (with RF connection).
Auto Set Up
-- Auto Channel Set/Auto Clock Set*/Auto Guide Program
Number Set
* If you select a country in Central or Eastern Europe, set the clock
manually (
13).
A Turn on recorder
Press 1. The Country Set screen appears
on the screen.
If you have connected your TV to the
recorder with RF connection and the on-
screen display appearing on UHF
channel 36 looks distorted, perform
"Video Channel Set" (
15).
B Select your country
Press rt to place the pointer next to your country, then press
OK. The language is automatically selected for the on-screen
display depending on the country you have selected. The AUTO
SET/T-V LINK screen appears.
If you have selected BELGIUM or SUISSE, the Language Set
screen appears. Press rt to place the pointer next to the
desired language, then press OK.
If you have selected MAGYARORSZÁG,
CESKÁ REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE, the Clock Set screen
appears. Press rt until the desired time
appears, then press OK or e. Set the date
and year in the same way. (Holding rt
changes the time in 30-minute intervals,
or changes the date in 15-day intervals.)
Then press MENU.
C Perform Auto Set Up
Press rt to place the pointer next to
"AUTO SET" and press OK or e.
If you are using the display panel, press
rt to select "Auto" and press OK or e.
Do NOT press any button during Auto Set Up.
D Confirm/Set video channel
With RF connection
The video channel that is shown on the display
panel is your video channel. Press OK.
If you have selected MAGYARORSZÁG,
CESKÁ REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE in step
2
2
2
2, "2" appears
instead of "1".
Basic Connections
Aerial connector
Back of TV
21-pin SCART
connector
TV aerial cable
RF cable
(provided)
21-pin SCART cable
(not provided)
Mains power cord
Mains outlet
Back of recorder
L-1 IN/OUT
RF OUT
ANT. IN
Initial Settings
ATTENTION:
While performing Auto Set Up for the first time,
do NOT disconnect the recorder from the power supply (AC)
do NOT press any button unless instructed
ensure that Auto Set Up is not interrupted while the operation
is still in progress
HR-V600_001EN.fm Page 4 Friday, January 24, 2003 11:21 AM