background image
GV-DS1
JLIP VIDEO CAPTURE DOCKING STATION
LYT0002-0J9A
GV-DS1
COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.
EK/EA
Printed in Japan
0397MKV*UN*VP
VICTOR COMPANY OF JAPAN, LIMITED
INSTRUCTIONS


background image
2
Dear Customer,
Thank you for purchasing this VIDEO CAPTURE
DOCKING STATION. Before use, please read
the safety information and precautions
contained in the following pages to ensure safe
use of this product.
Using This Instruction Manual
· All major sections and subsections are listed in
the Table Of Contents (
pgs. 6, 7).
· Notes appear after most subsections. Be sure to
read these as well.
· Basic and advanced features/operation are
separated for easier reference.
It is recommended that you . . .
..... refer to "Controls and Connectors" (
pg. 10 ­
11) and familiarize yourself with connector
locations before use.
..... read thoroughly the Safety Precautions and
CAUTIONS that follow. They contain ex-
tremely important information regarding the
safe use of your new VIDEO CAPTURE
DOCKING STATION.
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equip-
ment.
If the plug fitted is not suitable for the
power points in your home or the cable is too
short to reach a power point, then obtain an
appropriate safety approved extension lead or
consult your dealer.
BE SURE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.
If nontheless the mains plug is cut off ensure to
remove the fuse and dispose of the plug
immediately, to avoid a possible shock hazard
by inadvertent connection to the mains supply.
If this product is not supplied fitted with a
mains plug then follow the instructions given
below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the
terminal identifications of your plug, connect
as follows:
Blue wire to terminal coded N (Neutral) or
coloured black.
Brown wire to terminal coded L (Live) or
coloured Red.
If in doubt -- consult a competent electrician.
IMPORTANT


background image
3
SAFETY
PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
CAUTIONS:
To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.
NOTES:
The rating plate (serial number plate) and
safety caution are on the bottom of the
VIDEO CAPTURE DOCKING STATION.
The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.
This unit is produced to comply with Standard
IEC Publ. 65.
SOME DO'S AND
DON'TS ON THE SAFE
USE OF EQUIPMENT
This equipment has been designed and manufac-
tured to meet international safety standards but,
like any electrical equipment, care must be taken
if you are to obtain the best results and safety is
to be assured.
DO
read the operating instructions before you
attempt to use the equipment.
DO
ensure that all electrical connections
(including the mains plug, extension leads and
interconnections between pieces of equip-
ment) are properly made and in accordance
with the manufacturer's instructions. Switch
off and withdraw the mains plug when making
or changing connections.
DO
consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.
DO
be careful with glass panels or doors on
equipment.
DON'T continue to operate the equipment if you are in
any doubt about it working normally, or if it is
damanged in any way -- switch off, withdraw
the mains plug and consult your dealer.
DON'T remove any fixed cover as this may expose
dangerous voltages.
DON'T leave equipment switched on when it is
unattended unless it is specifically stated that
it is designed for unattended operation or has
a standby mode. Switch off using the switch
on the equipment and make sure that your
family knows how to do this. Special
arrangements may need to be made for infirm
or handicapped people.
DON'T use equipment such as personal stereos or
radios so that you are distracted from the
requirements of road safety. It is illegal to
watch television whilst driving.
DON'T listen to headphones at high volume, as such
use can permanently damage your hearing.
DON'T obstruct the ventilation of the equipment, for
example with curtains or soft furnishings.
Overheating will cause damage and shorten
the life of the equipment.
DON'T use makeshift stands and NEVER fix legs with
wood screws -- to ensure complete safety
always fit the manufacturer's approved stand
or legs with the fixings provided according to
the instructions.
DON'T allow electrical equipment to be exposed to
rain or moisture.
ABOVE ALL
-- NEVER let anyone especially children push anything
into holes, slots or any other opening in the case --
this could result in a fatal electrical shock;
-- NEVER guess or take chances with electrical equip-
ment of any kind -- it is better to be safe than sorry!


background image
4
CAUTIONS
DO NOT attempt to insert foreign objects into the connectors, as this can lead
to electric shock or fire. If an object is accidentally inserted, unplug it and
contact your JVC dealer. Be especially careful with children.
If during use you notice that the VIDEO CAPTURE DOCKING STATION is
damaged, unplug it and contact your JVC dealer. Use of the VIDEO CAPTURE
DOCKING STATION under these conditions can lead to fire or electric shock.
DO NOT attempt to repair or modify the VIDEO CAPTURE DOCKING
STATION. Doing so may result in malfunctions or injury. If a problem occurs,
contact your JVC dealer.
Failure to heed the following precautions may result in damage to the VIDEO
CAPTURE DOCKING STATION.
1. DO NOT place the VIDEO CAPTURE DOCKING STATION . . .
.... in an environment prone to extreme temperatures or humidity.
.... in direct sunlight.
.... in a dusty environment.
.... in an environment where strong magnetic fields are generated.
.... on a surface that is unstable or subject to vibration. The unit may fall, causing injury.
2. DO NOT place heavy objects on the VIDEO CAPTURE DOCKING STATION.
3. DO NOT place anything which might spill on top of the VIDEO CAPTURE DOCKING
STATION.
4. AVOID violent shocks to the VIDEO CAPTURE DOCKING STATION during transport.
5. DO NOT leave the VIDEO CAPTURE DOCKING STATION plugged in when the unit is not
in use.
6. DO NOT use accessories other than those designated in the instructions. Use of others can
lead to fire or electric shock.
7. DO NOT connect devices to the VIDEO CAPTURE DOCKING STATION other than those
designated in the instructions. Use of others can lead to malfunctions.


background image
5
How to handle a CD-ROM
Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not
write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward from the center hole using a circular motion.
Do not use conventional disc cleaners or cleaning spray.
Do not bend the CD-ROM or touch its mirror surface.
Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct
sunlight.
MAINTENANCE
If the inside of the VIDEO CAPTURE DOCKING STATION is left dusty for a long time, its use
can lead to fire or malfunction. Consult your JVC dealer on cleaning.
AC Power Adapter/Charger
DO NOT remove the cover and attempt to repair or modify the AC Power Adapter/Charger.
Doing so may result in malfuncitons or electrical shock and injury. If a problem occurs,
contact your JVC dealer.
Make sure the Power Cord is securely connected to the AC Power Adapter/Charger.
When using the AC Power Adapter/Charger, use only the supplied Power Cord. Use of any
other cord may result in shock or fire.
Connect the Power Cord to the AC Power Adapter/Charger before connecting it to an AC
outlet. If you plug it into an outlet first, and the Adapter's terminals come in contact with a
metal surface or object, short circuit or fire may result.
Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/
Charger. This is normal.
The AC Power Adapter/Charger processes electricity internally, and will become warm
during use. This is normal. Make sure to use the AC Power Adapter/Charger in well-
ventilated areas only.
CAUTION:
Changes or modifications not approved by JVC could void user's authority to operate the
equipment.
The Readme.TXT file provides additional information for setup and information that is not
included in the instruction manual. Please read the file before installing the provided
software program.
You can find the latest information (in English) on the provided software program at our
www server.
<www>http://www.jvc-victor.co.jp/