SERVICE MANUAL
No.86563
July 2000
GR-DVL805KR
SPECIFICATIONS
DIGITAL VIDEO CAMERA
VICTOR COMPANY OF JAPAN, LIMITED
VIDEO DIVISION
Printed in Japan
S40894
Regarding service information other than these sections, refer to the GR-DVL805U service manual (No.86550).
Also, be sure to note important safety precautions provided in the service manual.
Camcorder
For General
Power supply
: DC 6.3 V
(Using AC Power Adapter/Charger)
DC 7.2 V
(Using battery pack)
Power consumption
LCD monitor off, viewfinder on
: Approx. 4.3 W
LCD monitor on, viewfinder off
: Approx. 5.3 W
Video light
: Approx. 3.5 W
Dimensions (W x H x D)
: 80 mm x 96 mm x 159 mm (3-3/16" x 3-13/16" x 6-5/16")
(with the LCD monitor closed and the viewfinder pushed down)
Weight
: Approx. 580 g (1.3 lbs)
Operating temperature
:0
°C to 40°C (32°F to 104°F)
Operating humidity
: 35% to 80%
Storage temperature
: 20
°C to 50°C (4°F to 122°F)
Pickup
: 1/4" CCD
Lens
: F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens
Filter diameter
: ø37 mm
LCD monitor
: 3.5" diagonally measured, LCD panel/TFT active matrix system
Viewfinder
: Electronic viewfinder with 0.44" color LCD
Speaker
: Monaural
For Digital Video Camera
Format
: DV format (SD mode)
Signal format
: NTSC standard
Recording/Playback format
: Video: Digital component recording
: Audio: PCM digital recording, 32 kHz 4-channel (12-bit),
48 kHz 2-channel (16-bit)
Cassette
: Mini DV cassette
Tape speed
: SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time
: SP: 80 min.
(using 80 min. cassette)
LP: 120 min.
For Digital Still Camera
Storage media
: Built-in flash memory, 2 Mbyte
Compression system
: JPEG (compatible)
File size
: VGA: 640 x 480 pixels
Picture quality
: 2 modes (FINE/STANDARD)
Approximate number of storable images
FINE
:30
STANDARD
:60
For Connectors
S
:Y :1 V (p-p), 75
, analog output
C : 0.29 V (p-p), 75
, analog output
AV
Video output
:1 V(p-p), 75
, analog
Audio output
: 300 mV (rms), 1 k
, analog, stereo
DV
Input/output
: 4-pin, IEEE 1394 compliant
PC (DIGITAL PHOTO)
Digital still output
: ø2.5 mm, 3-pole
JLIP/EDIT
: ø3.5 mm, 4-pole
AC Power Adapter/Charger AA-V40KR
Power requirement
: AC 110 V to 220 V`, 60 Hz
Power consumption
: 23 W
Output
Charge
: DC 7.2 V
, 1.2 A
VTR
: DC 6.3 V
, 1.8 A
Dimensions (W x H x D)
: 68 mm x 38 mm x 110 mm (2-11/16" x 1-1/2" x 4-3/8")
Weight
: Approx. 250 g (0.56 lbs)
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject
to change without notice.
TABLE OF CONTENTS
DIFFERENT TABLE
4. CHARTS AND DIAGRAMS
4.1 MAIN (TG/VGR) SCHEMATIC DIAGRAM .............................................................................................................. 4-1
4.2 BOARD INTERCONNECTION ............................................................................................................................... 4-2
4.3 CAMERA DSP SCHEMATIC DIAGRAM ................................................................................................................ 4-4
4.4 JACK CIRCUIT BOARD ......................................................................................................................................... 4-6
4.4 JUNCTION CIRCUIT BOARD ................................................................................................................................ 4-7
4.5 REAR CIRCUIT BOARD ........................................................................................................................................ 4-7
4.6 MAIN CIRCUIT BOARD ........................................................................................................................................ 4-8
5. PARTS LIST
5.1 PACKING ASSEMBLY <M1> ................................................................................................................................ 5-1
5.2 FINAL ASSEMBLY <M2> ..................................................................................................................................... 5-3
6. AC POWER ADAPTER
6.1 CABINET ASSEMBLY <MA> ................................................................................................................................ 6-1
6.2 SCHEMATIC DIAGRAM ........................................................................................................................................ 6-2
6.3 CIRCUIT BOARD ................................................................................................................................................... 6-4
6.4 ELECTRICAL PARTS LIST ..................................................................................................................................... 6-5
The following table indicate different parts number between models GR-DVL805U and GR-DVL805KR.
1
PACKING CASE
LY31631-008B
LY31631-026A
5
INST. BOOK
LYT0575-001B (ENGLISH)
LYT0615-001A (KOREA)
6
INST. BOOK (SOFT, SET UP)
LYT0576-001A (ENGLISH)
LYT0616-001A (KOREA)
9
Q.CARD (JCA)
YU10350
10
WRRANTY INF.
BT-51005-4
11
REGIST. CARD
BT-51020-2
15
IB (CAPTURE)
LYT0576-002A (ENGLISH)
LYT0615-002A (KOREA)
16
IB (PICNAVI)
LYT0576-003A (ENGLISH)
LYT0616-003A (KOREA)
23
LENS CAP
LY42182-001A
LY42182-002A
29
AC POWER ADAPTER, CHAGER
LY20591-001B (AA-V40U)
LY20591-010A (AA-V40KR)
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
PACKING ASSEMBLY <M1>
REF NO.
1
Note : Mark is not used.
The following table indicate main different points between models GR-DVL805U and GR-DVL805KR.
AC ADAPTER CHARGER
AA-V40U
AA-V40KR
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
101
LOWER CASE ASSY
LY20560-001B
LY20560-004B
104
CASS. COVER ASSY
LY31609-001A
LY31609-003C
104B
BKT (E.KNOB)
* LY42173-001A
LY42173-001B
108
REAR COVER ASSY
LY31596-001A
LY31596-003B
111
UPPER CASE (3) ASSY
LY20550-002A
LY20550-006C
139
SCREW
* LY30018-096A
QYSPSPT1725R
143
SCREW
* LY30018-059A
QYSPSGT1760R
150
HOLDER (MECHA) ASSY
* LY31618-001B
LY31618-001C
150B
SPECIAL SCREW
LY30018-056A
LY300180B4A
168
SHEET
*
LY42583-001A
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
FINAL ASSEMBLY <M2>
REF NO.
300
COLOR VF UNIT
* LY20596-001A
LY20596-001B
306
HINGE (VF) ASSY
* LY31602-001A
LY31602-001C
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
ELECTRONIC VIEWFINDER ASSEMBLY <M4>
REF NO.
501
MONITOR COVER ASSY
* LY20565-006A
LY20565-006B
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
MONITOR ASSEMBLY <M5>
REF NO.
2
Note : Mark is not used.
Note : Mark * is GR-DVL-805U was also changed.
Note : Mark * is GR-DVL-805U was also changed.
Note : Mark * is GR-DVL-805U was also changed.
3
PW1
MAIN BOARD ASSY
* YB10277F-02
YB10277F-05
R1077
MG RESISTOR
* NRVA6AD-473W
NRSA6AD-473W
R2102-
R2105
MG RESISTOR
* NRSA6AJ-0R0W
R2205
R3007
R3201
R3202
R3215
MG RESISTOR
* NRSA6AJ-0R0W
R3235
R3309
R3330
R3706
MG RESISTOR
* NRSA6AJ-152W
NRSA6AJ-102W
C2203
C2205
C2214
C CAPACITOR
* NBP21CM-105X
NCB11CK-105X
C2623
C3702
C CAPACITOR
* NCFA1AZ-104W
NCB30JK-105X
L2601-
L2603
MG RESISTOR
* NRSA63J-0R0X
IC5601
IC
*
TC7S32FU-X
IC5602
IC
*
TC7S04FU-X
R5602
MG RESISTOR
*
NRSA6AJ-0R0W
C5601
C5602
C CAPACITOR
*
NCBAIAK-104W
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
MAIN BOARD ASSEMBLY <01>
REF NO.
PW2
JUNCTION BOARD ASSY
* YB10278A2-01
YB10278A2-02
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
JUNCTION BOARD ASSEMBLY <05>
REF NO.
PW1
JACK BOARD ASSY
* YB10287A2-01
YB10267A2-02
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
JACK BOARD ASSEMBLY <06>
REF NO.
PW3
REAR BOARD ASSY
* YB10278A3-01
YB10278A3-02
MODEL
GR-DVL805U
GR-DVL805KR
ITEM
REAR BOARD ASSEMBLY <07>
REF NO.
Note : Mark * is GR-DVL-805U was also changed.
Note : Mark * is GR-DVL-805U was also changed.
Note : Mark * is GR-DVL-805U was also changed.
Note : Mark is not used.
Note : Mark * is GR-DVL-805U was also changed.