COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD
SERVICE MANUAL
Regarding service information other than these sections, refer to the service manual No. 86736 (GR-DV4000US).
Also, be sure to note important safety precautions provided in the service manual.
Camcorder
For General
Power supply
:
DC 11 V (Using AC Adapter)
DC 7.2 V (Using battery pack)
Power consumption
LCD monitor off, viewfinder on :
Approx. 3.7 W
LCD monitor on, viewfinder off :
Approx. 4.8 W
Dimensions (W x H x D)
:
74.5 mm x 91 mm x 185 mm (2-15/16" x 3-5/8" x 7-5/16")
(with the LCD monitor closed and the viewfinder pushed back in)
Weight
:
Approx. 610 g (1.4 lbs) (GR-DV900/800)
Approx. 575 g (1.3 lbs) (GR-DV500)
(without cassette, memory card and battery)
Approx. 750 g (1.7 lbs) (GR-DV900/800)
Approx. 715 g (1.6 lbs) (GR-DV500)
(incl. cassette, memory card and battery)
Operating temperature
:0
°C to 40°C (32°F to 104°F)
Operating humidity
:
35% to 80%
Storage temperature
:20
°C to 50°C (4°F to 122°F)
Pickup
:
1/4" CCD
Lens
:
F 1.2, f = 3.8 mm to 38 mm, 10:1 power zoom lens (GR-DV900)
F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens (GR-DV800/500)
Filter diameter
:
ø52 mm
LCD monitor
:
3.5" diagonally measured, LCD panel/TFT active matrix system
(GR-DV900/800)
2.5" diagonally measured, LCD panel/TFT active matrix system
(GR-DV500)
Viewfinder
:
Electronic viewfinder with 0.24" color LCD
Speaker
:
Monaural
For Digital Video Camera
Format
:
DV format (SD mode)
Signal format
:
NTSC standard
Recording/Playback format
:
Video : Digital component recording
Audio : PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz
2-channel (16-bit)
Cassette
:
Mini DV cassette
Ta pe speed
:
SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time
(using 80 min. cassette)
:
SP: 80 min.
LP: 120 min.
Specifications shown are for SP mode unless otherwise indicated.
E & O.E. Design and specifications subject to change without notice.
For Digital Still Camera
Storage media
:
SD Memory Card/MultiMediaCard
Compression system
:
Still image
: JPEG (compatible)
Moving image : MPEG4 (compatible)
File size
Still image
:
4 modes (1600 x 1200 pixels/1280 x 960 pixels/1024 x 768 pixels/
640 x 480 pixels)
Moving image
:
1 mode (160 x 120 pixels)
Picture quality
:
2 modes (FINE/STANDARD)
Approximate number of storable images
:
pg. 39
For Connectors
S
S-Video input
:
Y: 0.8 V to 1.2 V (p-p), 75
, analog
C: 0.2 V to 0.4 V (p-p), 75
, analog
S-Video output
:
Y: 1.0 V (p-p), 75
, analog
C: 0.29 V (p-p), 75
, analog
AV
Video input
:
Y: 0.8 V to 1.2 V (p-p), 75
, analog
Video output
:
Y: 1.0 V (p-p), 75
, analog
Audio input
:
300 mV (rms), 50 k
, analog, stereo
Audio output
:
300 mV (rms), 1 k
, analog, stereo
EDIT
:
ø3.5 mm, 2-pole
Headphone output
:
Stereo
DV
Input/output
:
4-pin, IEEE 1394 compliant
USB
:
5-pin
AC Adapter
For General
Power requirement
U.S.A. and Canada
:
AC 120 Vd, 60 Hz
Other countries
:
AC 110 V to 240 Vd, 50 Hz/60 Hz
Output
:DC 11 V G, 1 A
No.86734
2003/05
GR-DV500US, GR-DV800US,
GR-DV801US, GR-DV900US
GR-DV500US M3D4S3
GR-DV800US M3D4L3
GR-DV801US M3D4L3
GR-DV900US M3D4L7
DIGITAL VIDEO CAMERA
SPECIFICATIONS (The specifications shown pertain specifically to the model GR-DV500U, GR-DV800U and GR-DV900U.)
1
The following table indicate main different points between models GR-DV4000US, GR-DV500US, GR-DV800US, GR-DV801US
and GR-DV900US.
DIFFERENT LIST
DIFFERENT TABLE OF FEATURE
Notes: Mark
is same as left.
MODEL
GR-DV4000US
ITEM
GR-DV800US
GR-DV500US
GR-DV900US
GR-DV801US
LENS SPECIFICATION
F1.2-2.0
F1.8-2.4
F1.2-2.0
LCD MONITOR
3.5 INCH
2.5 INCH
3.5 INCH
INFO. LCD
USED
NOT USED
MANUAL FOCUS RING
USED
NOT USED
VIDEO FLASH
USED
NOT USED
INTERFACE SHOOTING
USED
NOT USED
EXPOSURE CONTROL
USED
NOT USED
R.A EDITING
USED
OPTION RCU
USED
AC ADAPTER
NOT USED
AP-V13U or AP-V11U
AC ADAPTER CHARGER
AA-V40U
NOT USED
DC CABLE
USED
NOT USED
REMOTE CONTROL
RM-V717U
RM-V718U
RM-V717U
RCU BATTERY
UM4 x2
CR2025
UM4 x2
LENS HOOD
USED
NOT USED
EDITING CABLE
USED
NOT USED
USED
MEMORY CARD (PROVIDED)
SD 8MB
MMC 8MB
CONTENTS
DIFFERENT LIST ..................................................................................................................................................................... 1
5.
PARTS LIST .................................................................................................................................................................... 5-1
JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
www.jvcservice.com(US Only)
JVC CANADA INC.
Head office : 21 Finchdene Square Scarborough, Ontario M1X 1A7
(416)293-1311
Printed in Japan
0305 VP
5-1
SECTION 5
PARTS LIST
5.1.1 PACKING AND ACCESSORY ASSEMBLY <M1>
The instruction manual to be provided with this product will differ according to the destination.
SAFETY PRECAUTION
Parts identified by the
symbol are critical for safety. Replace only with specified part numbers.
BEWARE OF BOGUS PARTS
Parts that do not meet specifications may cause trouble in regard to safety and performance. We
recommend that genuine JVC parts be used.
5.1
EXPLODED VIEW
047
048
050
051
046
042
043
003
002
007
008
FINAL ASSY
<M2>
LABEL
(SERIAL)
LABEL
(SERIAL,
ACC.)
006
085
005
081
074
094
071
009
004
080
078
083
086
079
082
092
091
093
087
072
073
077
075
076
041
014
024
022
5-2
5.1.2 FINAL ASSEMBLY, REAR ASSEMBLY(G) AND SHOE ASSEMBLY(G) <M2>
e
r
e
d
b
a1
a2
c
m
u
g
u
r
p2
m
n
p1
a1
a2
h1
h2
j1
j2
j3
h1
'h1
j6
h2
'h2
j5
j4
s3
s4
s2
s1
'h1
'h2
j5
d
p1
p2
b
n f
g
s4
c
g
r
s3
s2
k3
k2
p1
p2
k1
s1
p1
p2
j1
j2
j3
j4
k2
k3
q
q
j6
t
t
w
w
t
t
z1
z3
z1
z2
z2
z3
g
f
y
y
FINAL ASS'Y LYH20608
SHOE ASS'Y(G) LYH20612
REAR ASS'Y(G) LYH20611
153
154
281
285
285
284
287
282
283
139
138
150
118
118
106
106
107
149
143
143
137
136
130
129
128
127
145
117
116
111
112
108
148
110
113
110
105
151
152
112
133
132
128
127
126
121
146
125
124
123
126
119
120
104
109
133
132
147
293
294
292
291
113
131
102
115
103
113
114
135
121
122
134
145
PART.NO
0.10
±0.010 N·m
0.08
±0.008 N·m
0.07
±0.007 N·m
LOWER CASE ASS'Y
NOTES
NOTES
C6202
OP FRAME ASS'Y
J2G TYPE
J7C TYPE
<M2> FINAL ASS'Y
REAR ASS'Y(G)
SHOE ASS'Y(G)
OP FRAME ASS'Y
COVER(SHOE)
ASS'Y
FRONT
ASS'Y(G)
<02> JACK
BOARD ASS'Y
SHIELD
COVER(PR)
LOWER CASE ASS'Y
BKT(H.S)
SHOE
ASS'Y
BKT
(SHOE MIC)
REAR ASS'Y(G)
BKT(MECHA) ASS'Y
BASE
<M3>
MECHANISM
ASS'Y
UPPER
ASS'Y(G)
<01> MAIN
BOARD ASS'Y
<04> PRE/MDA
BOARD ASS'Y
REAR UNIT
<03> REG
BOARD ASS'Y
BKT(OP-J7)2
SPACER(A)
SPACER(A)
SPACER(A)
SPACER(A)
SPACER(A)
BKT
(OP-J2) ASS'Y
BKT(OP-J7)
ASS'Y
OP BLOCK
ASS'Y
OP BLOCK
ASS'Y
<10> CCD
BOARD ASS'Y
<10> CCD
BOARD ASS'Y
OP FRAME ASS'Y
1. BEND FPC , AND PASS THE CORNER
HOLE OF THE SHEET METAL .
2. BE CAREFUL NOT TO CUT FPC BY
THE SHEET METAL EDGE .
3. NOTE IT EXTERNALS WHERE THE DENT
IS NOT IN FPC WITH THE WOUND .
4. DO NOT TOUCH BY THE FINGER TERMINAL
AREA OF FPC .
FIG.1 DRUM MOTOR FPC PROCESSING CHART
PROCESS THIS PART OF DRUM MOTOR
FPC TO THE SHIELDING CASE .
TABLE OF SETTING TORQUE FOR SCREW DRIVER
SETTING TORQUE
OTHER SCREW
SPACER DOSE NOT GO UP
PART
OF BKT.
STICKING AS SHOWN IN
FIGURE.
(MACHING TO FRONT
EDGE.)
SOLDERING
STICKING AS SHOWN IN FIGURE.
(MACHING TO LEFT EDGE.)
STICKING AS SHOWN
IN FIGURE. (MACHING
TO FRONT EDGE.)
SOLDERING
BEND
DO NOT PUT EXTERNAL
FORCE ON THE FPC ROOT.
DO NOT PUT EXTERNAL
FORCE ON THE FPC
ROOT WHEN BENDING
IT.
PASTE ACCORDING
TO THE CORNER OF
THIS COIL AND APPLY IT.
FIG-1. SPACER AFFIXATION POSITION
FIG-2. SHIELD AFFIXATION POSITION
IT MATCHES IT
TO THE END FACE
OF THE PWB.
IT MATCHES IT TO THE
END FACE OF C6202.
PUT IT SO THAT THE SHEET SHOULD
NOT FLOAT. ESPECIALLY, NOTE THE
PWB END FACE SIDE.
FIG.3 SPACER(MECHA) INSTALLATION CHART (M3D6L)
FIG.4 SPACER(MECHA) INSTALLATION CHART (M3D4L)
THE INTERIOR SIDE IS ARM BKT MATCH.
THE INTERIOR SIDE IS A
CORNER HOLE MATCH OF OP BKT.
MATCHING TO
EDGE FASE OF
MAIN PWB.
PEEL OFF,
PASTE A TWO SIDED TAPE,
AND APPLY IT.
EDGE MATCH OF SCREW.
FIG.2 STOPPER(JACK) INSTALLATION CHART
S TERMINAL
SUPPRESS FROM BOTH SIDES
OF UPPER AND LOWER FIRMLY,
AND TIGHTEN FROM RIGHT SCREW.
SOLDERING
(Refer to the Exploded
view for this part.)
(Refer to the Exploded
view for this part.)
(Refer to the
Exploded view for
this part.)
(Refer to the
Exploded view
for this part.)
(Refer to the Exploded view for this part.)
186
187
188
185
190
192
189
184
RATING LABEL
CASSETTE HOUSING
A
A SIDE
9 mm
1
mm
<M2>
CLEANER ASS'Y LYH20604
THE KNOB IS C.COVER SIDE
AS SHOWN IN FIGURE.
IN WATCHING, THERE MUST BE NEITHER BENDING OF
THE STICKER NOR GREAT MISREGISTRATION.
DRAWING FOR STICKER(C) STICKING
LABEL AFFIXATION POSITION