GR-AX480
GR-AX280
COMPACT VHS CAMCORDER
LYT0060-001A
INSTRUCTIONS
ENGLISH
EN
Compact VHS
PAL
(The camcorder illustrations appearing in
the illustrations are of the GR-AX480.)
MAJOR FEATURES
The Logical Choice
PAL
The only compact video
cassettes that can be
used with your VHS VCR*
Program Manager II (
pg. 18 31)
Programme AE with Special Effects
(
pgs. 18, 19)
5Sec.-Rec (5 sec. Recording)
(
pg. 15)
22x Optical Hyper Zoom (
pg. 14)
Intergrated Auto Light
(GR-AX480 only) (
pg. 16)
Dear Customer,
Thank you for purchasing the JVC Compact VHS
camcorder. Before use, please read the safety
information and precautions contained in the
following pages to ensure safe use of your new
camcorder.
Warning on lithium battery
The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, heat above 100°C or
incinerate.
Replace the battery with Maxell, Panasonic
(Matsushita Electric), Sanyo or Sony CR2025;
use of another battery may present a risk of fire
or explosion.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in
fire.
2 EN
PAL
Camcorder is designed exclusively for the VHS-C video cassette. Only cassettes marked VHS-C can be
used with this unit.
HQ VHS is compatible with existing VHS equipment.
SAFETY
PRECAUTIONS
Using This Instruction Manual
· All major sections and subsections are listed in the
Table Of Contents (
pg. 3).
· Notes appear after most subsections. Be sure to
read these as well.
· Basic and advanced features/operation are
separated for easier reference.
It is recommended that you . . .
.... refer to the Index (
pgs. 48 50) and
familiarize yourself with button locations, etc.
before use.
.... read thoroughly the Safety Precautions that
follow and cautions (
pgs. 51, 52). They
contain extremely important information
regarding the safe use of your new camcorder.
CAUTIONS:
To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and
viewfinder playback are possible anywhere.
Use the BN-V12U/V22U/V25U battery packs
and, to recharge them, the provided multi-
voltage AC Power Adapter/Charger. (An
appropriate conversion adapter may be
necessary to accommodate different designs of
AC outlets in different countries.)
NOTES:
The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.
This unit is produced to comply with Standard
IEC Publ. 65.
Program Manager II (
pg. 18 31)
Programme AE with Special Effects
(
pgs. 18, 19)
·Auto Mode Lock ·Auto Mode Release
·Electronic Fog Filter ·ND Effect
·Sepia ·Twilight ·Sports
·1/1000 sec. High Speed Shutter
·1/2000 sec. High Speed Shutter
5Sec.-Rec (5 sec. Recording)
(
pg. 15)
22x Optical Hyper Zoom (
pg. 14)
Intergrated Auto Light
(GR-AX480 only) (
pg. 16)
CONTENTS
EN
3
GETTING STARTED
4
Power ......................................... 4
Clock (Lithium) Battery
Insertion/Removal ......................... 6
Date/Time Setting ........................... 7
Tape Length Setting .......................... 8
Recording Mode Setting ..................... 8
Loading/Unloading A Cassette ............. 9
Grip Adjustment ............................ 10
Viewfinder Adjustment .................... 10
Shoulder Strap Attachment ............... 11
Tripod Mounting ............................ 11
RECORDING
12
Basic Recording ............................ 12
Basic Features ............................. 14
Advanced Features ........................ 18
PLAYBACK
32
Basic Playback ............................. 32
Features .................................... 33
Using The Cassette Adapter ............. 35
Basic Connections ......................... 36
TAPE DUBBING
37
USING REMOTE CONTROL
UNIT (GR-AX480 only)
38
Random Assemble Editing ................ 40
Insert Editing............................... 44
Audio Dubbing ............................. 45
TROUBLESHOOTING
46
INDEX
48
Controls .................................... 48
Connectors ................................. 48
Indicators ................................... 48
Other Parts ................................ 48
Viewfinder Indications ................... 50
CAUTIONS
51
SPECIFICATIONS
53
GETTING
STARTED
RECORDING
PLAYBACK
MAJOR FEATURES
PROVIDED ACCESSORIES
·AC Power Adapter/
Charger AA-V15EG
·Cassette Adapter
C-P7U
·Remote Control
Unit RM-V705U
(GR-AX480 only)
·Cable Adapter
·Battery Pack
BN-V12U
·Lithium Battery
CR2025
· x 2 for GR-AX480
(clock operation and
remote control unit)
· x 1 for GR-AX280
(clock operation)
·Shoulder Strap
·AUDIO/VIDEO
(A/V) Cable
·DC Cord
4 EN
GETTING STARTED
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1 Connectthecharger's ACpowercordtoawall
outlet.
ATTACH BATTERY PACK
2 Alignthemarksandslidethebatterypackinthe
direction of the arrow until it locks in place.
·The CHG. indicator begins blinking to indicate
charging has started.
DETACH BATTERY PACK
3 WhentheCHG.indicatorstopsblinkingbutstayslit,
charging is finished. Slide the battery pack opposite
the direction of the arrow.
USING THE BATTERY PACK
ATTACH BATTERY PACK
1 Hookitstopendtothecamcorderandpushthe
battery pack in until it locks in place.
DETACH BATTERY PACK
2 SlideBATT.RELEASEandpulloutthebatterypack.
ATTENTION:
Before detaching the power source,
make sure that the camcorder's power
is turned off. Failure to do so can result
in a camcorder malfunction.
REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge
the battery pack before recharging.
Perform the REFRESH function after no less
than 5 chargings.
To discharge the battery . . .
..... attach the battery pack to the adapter
as shown in the above illustration.
Then push REFRESH. The REFRESH
indicator lights when discharging
starts, and goes out when discharging
is complete.
CHG. (charge)
indicator
Marks
To AC outlet
REFRESH indicator
REFRESH switch
BATT. PACK
CHARGE
DISCHARGE
BN-V12U
approx. 1 hr. 10 min.
approx. 3 hrs. 30 min.
BN-V22U
approx. 2 hrs. 10 min. approx. 7 hrs.
BN-V25U
approx. 2 hrs. 40 min. approx. 10 hrs.
Push in.
Hook on.
BATT. RELEASE
1
1
2
BATT. PACK
Approximate recording time (unit: min.)
BN-V12U
75
( 40 )
BN-V22U
155
( 95 )
BN-V25U
200
( 120 )
( ) : when the video light is on. (GR-AX480 only)
EN
5
CHARGE MARKER
A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colours are provided (red and black)--you
choose which one means charged and which
means discharged.
USING A CAR BATTERY
Use the optional Car Battery Charger/Adapter
(connect as shown in the illustration above).
NOTES:
When using the car battery, leave the engine idling.
The optional Car Battery Charger (BH-V3E) can
also be used to charge the battery pack.
When using the optional Car Battery Charger,
refer to the respective instruction booklet.
USING AC POWER
Use the AC Power Adapter (connect as shown in
the illustration above).
NOTE:
The supplied AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
NOTES:
The recording time per charge is affected by such factors as the time spent in Record-Standby mode and
the frequency of zooming. It is safer to have spare battery packs.
Charging times noted on page 4 are for fully discharged battery pack, and discharging times are for fully
charged battery pack.
Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
Perform the REFRESH function after no less than 5 chargings.
While the AC Power Adapter/Charger's power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger
does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.
High temperatures can damage the battery pack, so use only where good ventilation is available. Don't
allow it to discharge in container, such as a bag.
If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter's AC cord.
Remove the battery pack from the adapter immediately after discharging.
To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
Make sure you unplug the DC cord before charging or discharging the battery pack.
The CHG. indicator may not light properly with a brand new battery pack, or with one that's been stored
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.
indicator should blink during recharging. If not, contact your nearest JVC dealer.
To DC IN jack
DC cord
DC OUT
terminal
To car's
cigarette
lighter socket
AC Power
Adapter/Charger
AA-V15EG
Car Battery Charger/Adapter
BH-V3E (optional)
To AC outlet
Charge marker