background image
POWER
CHROMA
MENU
INPUT SELECT
UNDER
SCAN
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
AB
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
COLOR VIDEO MONITOR
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D'INSTRUCTIONS : MONITEUR VIDÉO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR
USERS INSTRUCTIONS
AD9517B
Sensormatic
6600 Congress Avenue
Mail Stop B - 40
Boca Raton, Florida 33431
USA
For Customer Use:
Enter below the Serial No. which is located on the rear of the
cabinet. Retain this information for future reference.
Model No.
:
AD9517B
Serial No.
:
Kundenhinweis:
Bitte tragen Sie die Seriennummer, die sich an der
Gehäuserückseite befindet, hier unten ein und bewahren Sie
diese Information zur späteren Bezugnahme auf.
Modell-Nr.
:
AD9517B
Serien-Nr.
:
Pour l'usage du client:
Entrer ci-dessous le numéro de série qui est situé sur l'arrière
du coffret. Conserver cette information pour une référence
ultérieure.
Numéro de modèle
:
AD9517B
Numéro de série
:
Para uso del cliente:
Ingrese abajo el número de serie que está ubicado en la parte
posterior del gabinete.
Conserve esta información para futura referencia.
No. de modelo
:
AD9517B
No. de serie
:
Ad uso dell'utente:
Trascrivere qui di seguito il No. di serie ubicato sul lato
posteriore dell'apparecchio.
Conservare questa spiegazione per ogni eventuale futura
necessit.
Modello No :
AD9517B
No. di serie :
LCT1162-001A-H
LCT1162-001A-H(EN)
02.6.6, 9:55 AM
1


background image
LCT1162-001A-H(EN)
02.6.6, 9:55 AM
2


background image
ENGLISH
INSTRUCTIONS
COLOR VIDEO MONITOR
AD9517B
Thank you for purchasing this Sensormatic color video monitor. Before using it, read and
follow all instructions carefully to take full advantage of the monitor's capabilities.
LCT1162-001A-H(EN)
02.6.6, 9:55 AM
3


background image
In order to prevent any fatal accidents caused by misoperation
or mishandling the monitor, be fully aware of all the following
precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this
monitor to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of the cabinet. When servicing the monitor,
consult qualified service personnel. Never try to service
it yourself.
WARNING : THIS APPARATUS MUST
BE EARTHED.
PRECAUTIONS
Use only the power source specified on the unit.
(120 V AC/230 V AC, 50 Hz/60Hz)
When not using this unit for a long period of time, or when
cleaning it, be sure to disconnect the power plug from the
AC outlet.
Do not allow anything to rest on the power cord. And do not
place this unit where people will tread on the cord. Do not
overload wall outlets or power cords as this can result in a
fire or electric shock.
Avoid using this unit under the following conditions:
­ in extremely hot, cold or humid places,
­ in dusty places,
­ near appliances generating strong magnetic fields,
­ in places subject to direct sunlight,
­ in badly ventilated places,
­ in automobiles with doors closed.
Do not cover the ventilation slots while in operation as this
could obstruct the required ventilation flow.
When dust accumulates on the screen surface, clean it with
a soft cloth.
Unplug this unit from the AC outlet and refer servicing to
qualified service personnel under the following conditions:
­ when the power cord is frayed or the plug is damaged,
­ if liquid has been spilled into the unit,
­ if the unit has been dropped or the cabinet has been
damaged,
­ when the unit exhibits a distinct change in performance.
Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service
personnel.
When replacement parts are required, have the service
personnel verify in writing that the replacement parts he/
she uses have the same safety characteristics as the
original parts. Use of manufacture's specified replacement
parts can prevent fire, shock, or other hazards.
Upon completion of any servicing or repair work to this unit,
please ask the service personnel to perform the safety
check described in the manufacturer's service literature.
When this unit reaches the end of its useful life, improper
disposal could result in a picture tube implosion. Ask
qualified service personnel to dispose of this unit.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
Machine Noise Information Ordinance 3. GSGV,
January 18, 1991: The sound pressure level at the
operator position is equal or less than 70 dB(A)
according to ISO 7779.
Improper operations, in particular alternation of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, and
must therefore no longer be operated.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modification not approved by
Sensormatic could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the equipment and
receiver.
­ Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
­ Consult the dealer or an experienced radio/TV
technician for help.
2
SAFETY PRECAUTIONS
Notice (U.S.A. only)
This product utilizes both a Cathode Ray Tube (CRT) and
other components that contain lead. Disposal of these
materials may be regulated in your community due to
environmental considerations. For disposal or recycling
information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org.>
LCT1162-001A-H(EN)
02.6.6, 9:55 AM
4


background image
ENGLISH
CONTENTS
SAFETY PRECAUTIONS ................................................................................. 2
CONTROLS AND FEATURES .......................................................................... 4
HOW TO HANDLE BASIC OPERATIONS ....................................................... 7
HOW TO USE THE MENU FUNCTIONS.......................................................... 9
HOW TO INITIALIZE THE SETTING .............................................................. 12
BASIC CONNECTION EXAMPLE .................................................................. 13
HOW TO USE EXTERNAL CONTROL .......................................................... 14
TROUBLESHOOTING .................................................................................... 15
SPECIFICATIONS .......................................................................................... 16
SCREEN BURN
It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright
images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does
not occur as far as displaying normal video playback motion images.
3
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European coun-
tries), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated
to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V
AC 230 V
Countries
: U.S.A. and Canada
European countries
Warning:
Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock
or fire.
LCT1162-001A-H(EN)
02.6.6, 9:55 AM
5