background image
FLAT FACE COLOUR MONITOR
(DJ82)
CM823FET
with
EasyMenu !
EasyMenu is HITACHI's On Screen Display function for easy operation.
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
For future reference, record the serial number of your colour monitor.
SERIAL No.
The serial number is located on the rear of the monitor.
This monitor is ENERGY STAR
®
compliant when used with a
computer equipped with VESA DPMS.
The ENERGY STAR
® emblem does not represent EPA endorsement
of any product or service.
As an ENERGY STAR
® Partner, Hitachi,Ltd. has determined that this
product meets the ENERGY STAR
® guidelines for energy efficiency.
USER MANUAL
MANUEL D'UTILISATION
BEDIENUNGSANLEITUNG
MANUAL DE USUARIO
MANUALE DI ISTRUZIONI


background image


background image
1 - 1
EN
G
L
ISH
Colour Monitor
(DJ82)
CM823FET
USER MANUAL
Congratulations on your selection of a HITACHI Colour Monitor.
Read the instructions inside carefully, and keep this user manual for future
reference.
NOTE:
·
The information in this manual is subject to change without notice.
·
The manufacturer assumes no responsibility for any errors that may appear in this
manual.
·
The reproduction, transmission or use of this documents or contents is not
permitted without express written authority.
TRADEMARK ACKNOWLEDGMENT:
VGA is a registered trademark of International Business Machines Corporation.
VESA is a trademark of a nonprofit organization, Video Electronics Standard
Association.
ENERGY STAR
® is a trademark of Environmental Protection Agency (EPA).
CONTENTS
FEATURES ................................................................................................... 1 - 2
CAUTIONS ................................................................................................ 1 - 3
INSTALLATION ............................................................................................. 1 - 7
OPERATION ................................................................................................. 1 - 9
POWER SAVING SYSTEM ........................................................................ 1 - 16
PLUG & PLAY ............................................................................................. 1 - 16
SIGNAL CHECK ......................................................................................... 1 - 16
TROUBLESHOOTING ................................................................................ 1 - 17
SPECIFICATIONS ...................................................................................... 1 - 18
Tables:
Table 1-1. Adjustment Table ........................................................................ 1 - 11
Table 1-2. Power Saving System ................................................................ 1 - 16
Table 1-3. Signal Check .............................................................................. 1 - 16
Table 1-4. Troubleshooting ......................................................................... 1 - 17
Table 1-5. Standard Settings ...................................................................... 1 - 19
Table 1-6. Pin Assignment .......................................................................... 1 - 20


background image
1 - 2
EN
G
L
ISH
FEATURES
This Colour monitor provides the following features.
Sharpest Focus and Highest Contrast
Flat screen Enhanced Dot Pitch (EDP) CRT with anti-glare, dynamic focus circuit, dark
glass and an INVAR shadow mask gives the sharpest focus and highest contrast to
minimize eye fatigue.
Wide-range Multi-Scanning
Automatic scanning and automatic adjustment to conform to a wide range of scanning
frequencies and user requirements.
Digital Picture Control Function
Position, size, pincushion, trapezoid, parallelogram, etc. are adjustable through digital
controls. Geometry settings can be stored for different H/V frequencies.
Microprocessor-based preset functions can store 37 sets of geometry settings, including
the default factory settings.
Digital Colour Control Function
Red, green, and blue colour balance are adjustable through digital control. An adjusted
colour setting can be stored and recalled through the colour select function.
Power Saving System
The Environmental Protection Agency (EPA) has established a voluntary program by
which manufacturers enable computer products to go into low power states while not
being used. This monitor has a low power "sleep" mode, which is compliant with the EPA
requirements for the ENERGY STAR
® program, and will assist you in conserving energy.
Please refer to the section of "POWER SAVING SYSTEM" for details.
EasyMenu
An On Screen Display function that allows easy access to adjust all operations from the
front panel.
Plug & Play
This monitor is VESA DDC1/2B compliant when used with a computer compliant with
VESA DDC (Display Data Channel).
Automatic colour purity correction
The monitor uses an advanced technology to detect magnetic fields (geomagnetism) and
automatically adjusts the image to reduce colour purity distortions common with many
monitors.
NOTE:
If as an advanced user, you decide to use an external degaussing coil (other than the
degaussing function included in the digital controls of the monitor) it is strongly suggested
that the monitor be turned off. If you leave the monitor on while using the external
degaussing coil it may cause the monitor to produce uneven colour.


background image
1 - 3
EN
G
L
ISH
CAUTIONS
Discontinue Use if Abnormal Operation Occurs !
Abnormal operations such as smoke, burning smell, excessive sound, etc. could cause
fire or electrical shock. If you observe any abnormal operation, you should turn off the
monitor and disconnect the power plug from the power outlet. You should check for
smoke or fire and contact your dealer.
Do not expose the monitor to physical impact !
Do not allow foreign objects (water, metal, etc.) inside !
Never remove the cover of the monitor!
This colour monitor contains high voltage components. Ask your dealer to repair or clean
the inside if necessary
The power outlet should be close to the monitor and easily accessible !
Install the unit in a suitable environment !
Do not expose the monitor to rain, moisture, dust, corrosive gases, vibrations, etc. to
prevent electrical shock or fire hazard.
Avoid placing the monitor in direct sunlight or near heating appliances.
Do not place the monitor on an unstable base.
Keep in a well ventilated area !
Do not cover this monitor, nor place anything against any of its sides (not only the top, but
also including the right and left side of the monitor). The ventilation holes in the cover
prevent excessive temperatures inside the monitor.
Beware of magnetic fields !
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or any appliance
which generates a magnetic field near the unit. A magnetic field may cause blurred
colours or distortion of the displayed pattern.
Mind the ambient illumination !
Avoid direct sunlight or artificial light shining directly onto the CRT screen in order to
prevent eye fatigue.
Enclosed power cord must be used !
Failure to do so may cause fire or electrical shock hazard.
Use only the correct voltage power outlet with grounded connection !
This monitor will automatically adjust to the input voltage 100 - 120 / 200 - 240V.
Beware of the power cord connection !
Before inserting the plug of the power cord into a power outlet of the correct voltage, check
that the connection portion of the power cord is clean (with no dust). Then, insert the plug
of power cord into a power outlet firmly to avoid electrical shock or fire hazard.
Remove the power cord for complete disconnection !
For complete disconnection from the power source, remove the power cord from either the
monitor or wall socket.