HITACHI
COLOUR MONITOR
USER MANUAL..... I
MANUAL DE USUARIO...
MANUALE
ISTRUZIONI... 35
MANUEL D'UTILISATION.,. 45
with
!
is HITACHI's On Screen Display function for easy operation.
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
For future reference, record the serial number of your colour monitor.
SERIAL No.
The serial number is located on the rear of the monitor.
This monitor is ENERGY S TAR @ compliant when used with a computer
equipped
with
VESA
DPMS.
The ENERGY STAR@ emblem does not represent EPA endorsement
of any product or service.
As an ENERGY
Partner,
has determined that this
product meets the
S TAR @ guidelines for energy efficiency.
NOTE:
The information in this manual is subject to change without notice.
The manufacturer assumes no
responsibility for any errors that may appear in this manual.
TRADEMARK
ACKNOWLEDGEMENT
VGA is a registered trademark of International Business Machines Corporation.
VESA is a trademark of a nonprofit organisation, Video Electronics Standard Association.
ENERGY STAR@ is a trademark of Environmental Protection Agency (EPA).
HINWEIS:
Anderungen der Daten in dieser Bedienungsanleitung sind vorbehalten.
Der Hersteller iibernimmt
keine Haftung
jegliche in
Handbuch eventuell enthaltenen
VGA ist ein eingetragenes Warenzeichen der International Business Machines Corporation.
VESA ist ein Warenzeichen der Video Electronics Standard Association, einer Organisation ohne
Erwerbscharakter.
ENERGY STAR@ ist ein Warenzeichen der Environmental Protection Agency (EPA).
La
contenida en este manual
sujeta a cambios sin previo aviso.
El fabricante no
se responsabiliza de
que puedan aparecer en este manual.
DE
VGA es una
registrada de International Business Machines Corporation.
VESA es una
registrada de una
sin
de
Video Electronics Standard
Association.
ENERGY STAR@ es una
de Environmental Protection Agency (EPA).
Tutte le informazioni di
manuale
soggette ad essere modificate senza preavviso. II
costruttore non si assume responsabilita' per
possono essere riportati
manuale.
di fabbrica riconosciuti.
VGA e'
marchio di fabbrica regisrato da International Business Machine Corporation.
VESA e'
marchio di riconoscimento
organizzazione a non-profitto, Video Electronics
Standard Association.
ENERGY STAR@ e' marchio di fabbrica
Eviromental Protection Agency (EPA).
REMARQUE:
Les informations
dans ce manuel peuvent
modifiees sans preavis.
Le constructeur
n'accepte aucune responsabilite pour les erreurs qui peuvent eventuellement apparaitre dans ce
manuel.
MARQUES
VGA est une marque
d' International Business Machines Corporation.
VESA est la marque d'une organisation sans but lucratif, la Video Electronics Standard Association.
ENERGY STAR@ est une marque de I' EPA (Environmental Protection Agency, USA).
FEATURES
.......................................................................................................
1
CAUTIONS
2
..........................................................................................................
INSTALLATION ...................................................................................................
8
STANDARD SETTINGS..
9
....................................................................................
OPERATION.. ....................................................................................................
10
AUTOMATIC SIGNAL CHECK. .........................................................................
13
POWER MANAGEMENT SYSTEM.. .................................................................
13
PLUG
PLAY. ...................................................................................................
13
SPECIFICATIONS.. ...........................................................................................
14
The following features are provided by the Colour Monitor.
Sharpest Focus and Highest Contrast
Flat screen Enhanced Dot Pitch (EDP) CRT with FS double focus and AR-ASC coating gives the
sharpest focus and highest contrast to minimise eye fatigue.
Wide-range
Multi-Scanning
Automatic scanning and automatic adjustment to conform with a wide range of scanning frequencies
and user requirements.
Digital Picture Control Function
Position, size, pincushion, trapezoid, parallelogram, pin balance and rotation are adjustable by
digital
controls.
Geometry setting can be stored for different
frequencies. Microprocessor-based preset
functions can store 25 sets of geometry settings including the standard factory settings.
Digital Colour Control Function
Red, green, and blue colour balance is adjustable by digital control.
An adjusted colour setting can be stored and recalled by the colour select button.
Power Saving System
The Environmental Protection Agency (EPA) has established a voluntary program by which
manufacturers enable computer products to go into low power states while not being used. This
monitor has a low power "sleep" mode, which is compliant with the EPA requirements for the ENERGY
STAR@ program, and will assist you in conserving energy.
Please refer to the section of "POWER SAVING SYSTEM" for
details.
An On Screen Display function that allows direct access to adjust
all operations from the front panel.
PLUG
PLAY
This monitor is VESA
compliant when used with a
computer compliant with VESA DDC (Display Data Channel).
1
n NEVER REMOVE THE REAR COVER !
The rear cover MUST be removed only by authorised service personnel. This colour monitor
contains
high
voltage
components.
n
THE POWER POINT SHOULD BE CLOSE TO THE MONITOR AND
EASILY ACCESSIBLE !
n
INSTALL THE UNIT IN AN SUITABLE ENVIRONMENT !
NOT expose this monitor to rain or moisture to prevent electric shock or fire hazard.
This unit
is designed to be used in an office or business environment.
DO NOT subject the unit to vibrations, dust, or corrosive gases.
n
KEEP IN A WELL VENTILATED PLACE !
DO NOT cover this monitor or place anything against any sides (not only the top, right and left side
but also the rear and bottom side) of unit.
Ventilation holes are provided
all sides of the rear
cover to prevent the temperature from rising.
n
KEEP AWAY FROM HEAT SOURCES !
AVOID placing the unit in direct sunshine or near a heating appliance.
n
BE CAREFUL OF MAGNETIC FIELDS !
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or anything which will
generate magnetism near the unit.
A magnetic field may cause blurred colours or distortion of the
displayed
pattern.
n BE CAREFUL OF GENERATED MAGNETISM !
After the power has been turned on or "DEGAUSS" button has been pressed, the CRT is
demagnetised for approximately 10 seconds. This generates a strong magnetic field around the
front cover which may affect the data stored on magnetic tape or disks near the front cover.
Place
such magnetic recording equipment and tapes/disks away from this unit.
n
AMBIENT
ILLUMINATION
Avoid direct rays of the sun or room lighting onto the CRT screen in order to prevent eye fatigue.
n THE ENCLOSED POWER CORD MUST BE USED !
In Europe, a proper European standard approved power cord is to be used with this monitor.
For a
rated current up to 6 A, a type not lighter than
3G 0.75
or
3G 0.75
must be used.
In USA/Canada, use a UL
LABELLED or CERTIFIED power cord set meeting the
following
specifications
Rating: min.
7A
Length: max.
Type: SVT or SJT
Plug type: NEMA
figure, Parallel blade, Grounding type,
Failure to do so may cause fire or electric shock hazard.
n USE ONLY THE CORRECT VOLTAGE POWER OUTLET WITH SAFETY
GROUND CONNECTION !
100
120 V for USA, Canada, etc.
200
240 V for Europe, etc.
(This monitor will automatically adjust to the input voltage 100
120
200
240V.)
2
CAUTION for 200
240V operation only
This equipment relies on the protective devices in the building installation for short-circuit and
current protection. Refer to the following table for the suitable number and location of the protective
.
devices which should be provided in the building installation.
Protective devices in single
phase equipment or sub
assemblies
Protection
I
Minimum number
against
of fuses or circuit
I
Location
I
breaker poles
rnnected
to
Earth
faults
1
I
Equipment to be cc
Both conductors
POWER SYSTEMS with earthed
Over-current
1
neutral reliably identified
Either of the two
conductors
Equipment to be connected to any
Earth faults
2
Both conductors
supply,
POWER
SYSTEMS and supplies with
Over-current
1
Either of the two
reversible plugs
conductors
Verify that the protective devices in the building installation meets the conditions in the table prior to
installing the equipment.
n BE CAREFUL OF POWER CORD CONNECTION !
Before inserting the plug of the power cord into a power point of the correct voltage, check that the
connection portion of the power cord is clean (with no dust).
Then, insert the plug of power cord to
a power point firmly, otherwise it may cause electrical shock or fire.
n REMOVE THE POWER CORD FOR COMPLETE SEPARATION !
For complete separation from the power source, remove the power cord from the monitor or from the
wall outlet.
n
AVOID
POWER ON-OFF SWITCHING !
DO NOT repeat OFF and ON in a short period.
It may cause blurred colours or distortion of the
displayed
pattern.
n BE CAREFUL OF STATIC ELECTRICITY ON CRT SURFACE !
To prevent electrical shock by the static electricity on the CRT surface, disconnect the power cord at
least 30 SECONDS AFTER turning off the power.
n
ABOUT
CLEANING
This monitor has a non-glare and anti-electrostatic treatment on the surface of the screen.
Use
water or alcoholic solvent with soft cloth like gauze to clean the surface of the screen.
NEVER use abrasive, glass cleaner containing highly concentrated ammonia and strong base
chemicals since they damage the surface treatment.
Clean the cabinet and controls with a lightly moistened soft cloth.
DO NOT use aerosol sprays, solvents or abrasive cleaners.
3