background image
ENGLISH
Instructions for use
CG32W460AN


background image
GB - 1 -
Contents
Remote Control Buttons .................................................2
Control Panel Buttons ....................................................3
Connect Peripheral Equipment ......................................3
Connect Peripheral Equipment ......................................4
Via the Euroconnector ...................................................4
RGB mode .....................................................................4
Via Ant Input ..................................................................4
Decoder .........................................................................4
TV and Video Recoder (VCR) ........................................4
Playback NTSC .............................................................4
Copy Facility ..................................................................4
Search for and store the test signal of the
video recorder ................................................................4
Camera and Camcorder ................................................4
SVHS (via EXT.2) ...........................................................4
Connect the decoder to the video recorder ...................4
Connecting Headphones ...............................................4
Preparation ......................................................................5
Safety Precautions ..........................................................5
Before Switching on your TV .........................................7
Power connection ..........................................................7
Connections to the RF input socket ...............................7
How to connect other devices ........................................7
Inserting batteries in the remote control handset ..........7
Switching the TV ON/OFF ...............................................7
To switch the TV on ........................................................7
To switch the TV off ........................................................7
Operating the TV .............................................................7
A.P.S. (Automatic Programming System) ......................7
Operating with the buttons on the TV set .......................8
Operating with Remote Control .....................................8
Menu System ...................................................................8
Sound Menu ..................................................................8
Picture Menu ................................................................ 10
Feature Menu .............................................................. 11
Install Menu ................................................................. 12
Programme Menu ........................................................ 12
Autostore ..................................................................... 13
Other Features ............................................................... 13
TV Status ..................................................................... 13
Programme Swap (P<P) .............................................. 13
Double-digit (- -) ........................................................... 13
Personal Preferences (PP) .......................................... 13
Sound Indicator ............................................................ 14
Sleep Timer Last Minute Indicator ............................... 14
Mute Indicator .............................................................. 14
No-Signal ..................................................................... 14
Blue Background During No-Signal ............................. 14
Volume Bar .................................................................. 14
Teletext ........................................................................... 14
To operate Teletext ....................................................... 14
To select a page of Teletext ......................................... 14
To Select Index Page ................................................... 15
To Select Teletext with a TV Programme ..................... 15
Searching for a page while watching TV ...................... 15
To Select Double Height Text ....................................... 15
To Reveal "concealed" Information .............................. 15
To Stop Automatic Page Change ................................. 15
To Select a Subcode Page .......................................... 15
Fastext ......................................................................... 15
To exit Teletext ............................................................. 15
To Display the Time ..................................................... 15
Tips ................................................................................. 16
Care of the Screen ....................................................... 16
Poor Picture ................................................................. 16
No Picture .................................................................... 16
Sound .......................................................................... 16
Remote Control ............................................................ 16
No solution ................................................................... 16
Specifications ................................................................ 16
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
13.07.2004, 13:421


background image
GB - 2 -
Remote Control Buttons
= Stand By
I-II = Mono/Stereo - Dual I-II
0 - 9 = Direct Program
=Previous Programme
- - = Double Digit
= Info (Program Menu)
= Programme Up (Cursor Up)
= Cursor Right
-VOL / VOL + = Volume - / Volume +
Yellow (FEATURE) = Feature Menu
Blue (INSTALL) = Installation Menu
= External Source (AV-1
-1, AV-2, F-AV, RGB, SVHS)
Teletext Buttons
= Teletext
= Update
= Hold
= Index Page
= Reveal
= Expand
= Time
= Mix
= TV / Quit Menu
Red (SOUND) = Sound Menu
Green (PICTURE) = Picture Menu
= Programme Down (Cursor Down)
= Cursor Leftt
= Menu
= Change Picture Preset
= Mute
= Picture Mode Change (Auto / 4:3 / 16:9 / 14:9 / CINEMA / SUBTITLE)
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
13.07.2004, 13:422


background image
GB - 3 -
Aerial
External 1
External 2
EXT. 2
EXT. 1
Control Panel Buttons
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The connection diagrams show the back of the TV where the different equipment should be connected.
REAR PANEL
POWER /
= Power On / Offf
- VOLUME + = Volume - / Volume +
- PROG. + = Program - / Program +
MENU = MENU
Front AV input
AUDIO L / R = Audio left (white) / right (red)
VIDEO = VCR (yellow)
H-PHONE = Headphone 3,6 mm Ø
ANT.IN
Decoder
Camcorder
Audio
Headphone
For Satellite Receiver
Video
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
13.07.2004, 13:423


background image
GB - 4 -
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can
be connected to your TV.
The following connection diagrams show you where the differ-
ent equipment should be connected at the rear or the front
side of the TV.
Via the Euroconnector
Your TV set has one or two Euroconnector socket. If you want
to connect peripherals (e.g. video, decoder, etc.) which have
Eurocon-nectors, to your TV, use EXT.1 and EXT.2 inputs.
If an external device is connected via Euroconnector sockets
TV is switched to AV mode automatically. If the signal isRGB
then the RGB OSD indicator is displayed on the screen.
In AV mode if you press the "
" button the TV status OSD is
displayed on the screen.
RGB mode
If an equipment can output the RGB signals, connect it to the
AV-1 (EXT.1) terminal.
· Select the RGB mode to watch images from that equipment.
· When not in the RGB mode, turn the RGB signals output
equipment off.
Via Ant Input
If you want to connect to your TV, peripherals like video re-
corders or decoders, but the device you want to connect does
not have Euroconnector, you should connect it to the ANT in-
put of your TV set.
If the VCR is connected via antenna input it is suggested
to use the Programme 0.
Decoder
Cable TV offers you a wide choice of programs. Most of them
are free, others are to be paid for by the viewer. This means
that you will need to subscribe to the broadcasting organisation
whose programmes you wish to receive. This organisation will
supply you a corresponding decoder unit to allow the
programmes to be unscrambled.
For further information ask your dealer. See also the book-
let supplied with your decoder.
Connect a decoder with an aerial socket to the TV
· Connect the aerial cable.
Connect a decoder without an aerial socket to the TV
· Connect the decoder to your TV with a eurocable / RCA Jack
Cable to EXT.1 and EXT.2 / RCA Jack. When your decoder
has a Euroconnector / RCA Jack you can obtain better picture
quality if you connect a eurocable / RCA Jack Cable to EX-
TERNAL /RCA Jack.
TV and Video Recoder (VCR)
· Connect the Video Recorder to theANT (antenna input) socket
of the TV with the aerial cable.
· Connect the Video Recorder to theAV-1 or AV-2 terminal with
the SCART cable, or connect it to theF-AV terminal with the
audio and video cables.
Playback NTSC
Connect NTSC VCR player to Euroconnector at the back of
the TV.
or,
Connect NTSC VCR player to RCA Jack at the front of the TV.
Then, press " AV " button to select AV-1, AV-2, F-AV, RGB or
SVHS.
Copy Facility
Source selection for VCR recording.
· Select Features Menu in the Main Menu.
· Select AV-2 OUTPUT source pressing " " or " " button.
Search for and store the test signal of the video
recorder
· Unplug the aerial cable from the aerial socket "ANT" of your
video recorder.
· Switch on your TV and put the video recorder on the test sig-
nal. (See the handbook for your video recorder.)
· Enter the Fine Tuning via the Install menu.
· Search for the test signal of your video recorder in the same
way as you searched for and stored the TV signals. See Tun-
ing, Search and Store TV channels. Store the test signal un-
der programme number 0.
· Replace the aerial cable in the aerial socket "ANT." of your
video recorder once you have stored the test signal.
Camera and Camcorder
To connect to Front-AV input (F-AV)
Connect your camera or camcorder at the front side of your
TV.
· Connect your equipment to the TV viaVIDEO (yellow), AUDIO
R (red) and AUDIO L (white) inputs. You should connect the
jacks to the input in the same colour.
SVHS (via EXT.2)
If the equipment connected to your TV set supports S-Video (Y/
C) output from Euroconnector, you can have a better picture
quality by selecting AV-2 mode and connecting your equipment
to the EXT.2 terminal of TV. See your equipment's booklet to
check if your equipment has such feature.
Connect the decoder to the video recorder
Some video recorders have a special euroconnector for de-
coder.
· Connect a eurocable to the euroconnector of your decoder and
to the special eurocon-nector of your video recorder. See also
the handbook of your video recorder.
· To connect your video recorder to the TV, see TV and Video
Recorder section.
If you want to connect more equipment to your TV, consult
your dealer.
Connecting Headphones
Use the stereo headphone socket on the lower right side of
your TV, to connect headphones.
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
13.07.2004, 13:424