PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2004
T ZZM MAY. 2004 Printed in Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The cloth grille is attached to the front baffle by plastic catchers.
Detach the grille by pulling it toward you.
Woofers are attached to the baffle board by 8 internal screws
(rear side). To detach them, unfasten those screws.
Both tweeter and network assembly are attached to the baffle
board by 2 internal screws. To detach them, unfasten those
When attaching the network assembly, attach the network cable
to the baffle board by applying adhesive (6 points).
The cabinet is attached to the baffle board by 8 external screws.
To detach it, unfasten those screws.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
White Grill Assy
Screw (for Speaker Stand)
Screw (for Nut)
Screw (for Tweeter)
Screw (for Cabinet)
Screw (for Woofer)
NETWORK ASSY (FRWN-180)
Speaker Stand Assy
Hung On WL.Unit Assy
(English, Spanish, Chinese)
Polyethylene Bag S2