background image
1
CS-G405-K/Q
Service
Manual
ORDER NO.
PET99015
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1 B-9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00, Wheelock Place, Singapore 238880
©PIONEER CORPORATION 1999
1999 Printed in U.S.A.
HOW TO REASSEMBLE AND
DISASSEMBLE
65S
This service manual is intended for qualified service technicians; it is
not meant for the casual do-it- your selfer. Qualified technicians have
the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by
this manual.
Improperly performed repairs can adversely affect the safety and
reliability of the product and may void the warranty. If you are not
qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service
technician.
SPEAKER SYSTEM
S-DC1-K
·
The grille is attached to the trim baffle. Detach it by pulling toward
you.
·
The trim baffle is attached to the baffle by external screws. To
detach it, unfasten those screws.
·
The midrange is attached to the trim baffle with mid can by internal
screws. To detach it, unfasten those screws. When attaching, face
its terminal downward.
·
The tweeter is attached to the trim baffle by internal screws. To
detach it, unfasten those screws.
·
The metal grille is inserted to the mounting ring. To detach it,
insert a sharp-pointed tool like a letter opener into hole of metal
grille and push up carefully. To attach it, press it to the mounting
ring.
·
The woofer is attached to the top board with woofer gasket,
mounting ring and gasket, by external screws. To detach it, unfasten
those screws. When attaching, face its terminal downward. When
attaching, face its terminal leftward or rightward.
·
The crossover is attached to the backboard by external screws. To
detach it, unfasten those screws.


background image
2
CS-G405-K/Q
Mark No. Description
Parts No.
Mark No. Description
Parts No.
For Packing
SCHEMATIC DIAGRAM
S-DC1-K
Mark No. Description
Parts No.
Low Frequency Transducer
267476
Mid Frequency Transducer
267847
High Frequency Transducer
267481
Grille Assembly
268528
Trim Baffle
267798
Mounting Ring
267852
Metal Grille for Low Frequency Trans
267867
Crossover Assembly
267827
Gasket for Low Frequency Trans
270091
Gasket for Mounting Ring
268984
Instruction Manual
267758
Screw (for Low Frequency Trans)
BYC40P200FZB
Screw (for Mid Frequency Trans)
BPZ40P140FZB
Screw (for High Frequency Trans)
BBZ35P140FMC
Screw (for Trim Baffle)
BYC35P160FZB
Screw (for Crossover Assembly)
BYC40P200FZB
Packing Case
267738
Foam pad
267743
Polyethylene Sheet
268459
BLUE
BROWN
INPUT
WHITE
200
µ F / 50 V
3.3 mH
RED
BLK
GREEN
YELLOW
TWEETER
WOOFER
WHITE/BLACK
800.0
µ F / 50 V
1.20 / 10w
250.0
µ F / 50 V
27.0
µ F / 50 V
7.0
µ F / 50 V
2.0
µ F / 50 V
1.00 / 5w
4.00 / 5w
0.60 mH
0.14 mH
MIDRANGE
PARTS LIST
NOTES: · Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
· The "
" mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.