background image
ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2000
RRV2332
T-ZZM JUNE 2000 Printed in Japan
This product is component of system.
65S
This service manual is intended for qualified service technicians; it is not meant
for the casual do-it-yourselfer. Qualified technicians have the necessary test
equipment and tools, and have been trained to properly and safely repair complex
products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the
repair of this product properly and safely, you should not risk trying to do so and
refer the repair to a qualified service technician.
System
Service Manual
Remarks
- - - - -
RRV2340
RRV2339
RRV2332
Component
X-VS500D
XR-VS500D
S-VS500VLR
S-A9LRC
COMPACT MINI CONPONENT
STEREO DVD CASSETTE DECK RECIEVER
SPEAKER SYSTEM
SPEAKER SYSTEM
This service manual
S-A9LRC
XJI/UC
S-A9LRC XJI/E
S-A9LRC XJI/NC
SPEAKER SYSTEM
WARNING
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
reproductive harm.
Health & Safety Code Section 25249.6 ­ Proposition 65
System
Service Manual
Remarks
- - - - -
RRV2329
RRV2331
RRV2332
Component
X-A9800DV
XR-A9800D
S-A9800V
S-A9LRC
COMPACT MINI CONPONENT
STEREO DVD CASSETTE DECK RECIEVER
SPEAKER SYSTEM
SPEAKER SYSTEM
This service manual
Surround Speaker
Center Speaker


background image
2
S-A9LRC
Mark No.
Description
Part No.
Connecting Cord (SDF1087)
SCHEMATIC DIAGRAM
For Packing
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
NOTES:
PARTS LIST
Mark No.
Description
Part No.
NSP
CS ASSY (Center)
SMW1573
Speaker
D87DU54-52F
Connecting Cord
SDF1087
Gasket (Baffle Wide)
SEC1469
Gasket (Baffle Height)
SEC1470
Grille ASSY
SMG1688
NSP
Badge 38
SAM1442
NSP
Grille Cloth
SAS1477
NSP
Grille Frame
SMH1012
NSP
Cabinet
SMM1896
NSP
Baffle
SNK2465
Screw (for Speaker)
TTZ40P080FMC
NSP
CS ASSY (Surround)
SMW1574
Screw (for Baffle)
BYC40P130FZK
Speaker
D87DC54-57F
Connecting Cord
SDF1068
NSP
Cover
SES1018
Grille ASSY
SMG1690
NSP
Badge 38
SAM1442
NSP
Grille Cloth
SAS1478
NSP
Baffle Board
SNK2321
NSP
Cabinet
SNK2498
Screw (for Speaker)
TTZ40P080FMC
÷ For XJI/UC Type
NSP
Stamped Model Label (Center)
SME3035
NSP
Model Label (Center)
SAN2831
NSP
Stamped Model Label (Surround)
SME3036
NSP
Model Label (Surround)
SAN2832
÷ For XJI/E Type
NSP
Stamped Model Label (Center)
SME3037
NSP
Model Label (Center)
SAN2833
NSP
Stamped Model Label (Surround)
SME3038
NSP
Model Label (Surround)
SAN2834
÷ For XJI/NC Type
NSP
Stamped Model Label (Center)
SME3090
NSP
Model Label (Center)
SAN2881
NSP
Stamped Model Label (Surround)
SME3091
NSP
Model Label (Surround)
SAN2882
Top Protector
SHA2215
Bottom Protector
SHA2216
Protection Mat S4
SHC1588
NSP
Polyethylene Bag S1
SHL1109
÷ For XJI/UC Type
Packing Case
SHG2270
Master Carton
SHP1082
÷ For XJI/E Type
Packing Case
SHG2271
Master Carton
SHP1083
÷ For XJI/NC Type
Packing Case
SHG2310
Master Carton
SHP1084
Connecting Cord (SDF1068)
Speaker
INPUT
Black/White
Black
Center
Speaker
INPUT
Gray/Black
Gray
Surround


background image
3
S-A9LRC
PRODUCT APPEARANCE
No.
9
8
7
6
5
4
3
2
1
Part name
Model Label (Center)
Connection Cord
Cabinet
Speaker
Grille Assy
Screw
Baffle
Gasket
Gasket
Num.
1
1
1
1
1
4
1
1
1
Remarks
TTZ40P080FMC
SEC1469
SEC1470
No.
8
7
6
5
4
3
2
1
Part name
Model Label (Surround)
Connection Cord
Screw
Screw
Cover
Speaker
Grille Assy
Cabinet
Num.
1
1
4
4
1
1
1
1
Remarks
TTZ40P080FMC
BYC40P130FZK
1
2
3
4
5
6
7
8
9
127.5
127
270
271
100
(156)
1
2
3
4
5
6
7
127
194
(96)
8
Surround Speaker
Center Speaker
Note
The baffle is attached to the cabinet by its bosses applied with adhesive.
The baffle cannot be detached.
Note
The cover is attached to the cabinet with adhesive.


background image
4
S-A9LRC
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is united with the baffle, therefore cannot be sepa-
rated.
The baffle is attached to the cabinet by 4 external screws.
The speaker is attached to the baffle by 4 internal screws.
To detach it, first remove the baffle. Then remove the speaker.
When attaching it, face its terminal rightward.
(for Surround Speaker)
(for Center Speaker)
The grille is attached to the baffle by its bosses.
To detach it, pry it open by inserting a flat blade screwdriver
into left-side and right-side slot.
The speaker is attached to the baffle by 4 external screws. To
detach it, first remove the grille. Then remove the speaker.
When attaching it, face its terminal rightward.
The baffle is attached to the cabinet by its bosses applied with
adhesive.
The baffle cannot be detached.