background image
© B62-1978-00 (K, K2, K3)
09 08 07 06 05 04 03 02 01 00

background image
Thank You
We are grateful for your purchase of this KENWOOD product
and welcome you to the Business Radio Service (BRS).
Your KENWOOD 2-way Business Radio is called a "transceiver",
meaning "transmitter & receiver". We believe this easy-to-
use transceiver will provide you with dependable and reliable
communications. This KENWOOD transceiver is a precision
device. Treat it with care, and you will enjoy years of reliable
Models Covered bY This Manual
TK-2200L (K): 2-channel VHF FM Transceiver
TK-3200L (K): 2-channel UHF FM Transceiver
TK-2200L (K2): 8-channel VHF FM Transceiver
TK-3200L (K2): 8-channel UHF FM Transceiver
TK-3200L (K3): 15-channel UHF FM Transceiver
· 2 channels (K), 8 channels (K2) or 15 channels (K3) with 27
VHF operating frequencies (TK-2200L) or 56 UHF operating
frequencies (TK-3200L) and 122 tone/ code settings for each
channel allowing you to ignore unwanted calls.
· Built in voice scrambler gives you complete privacy for your
· Hands free operation when using an optional headset.
· Voice announcement lets you know which channel you
have selected and which settings you have made when
reassigning key functions and channel settings.

background image
Operating COnditiOns
Open locatons
(no obstructons)
Up to 6 mles
(approxmately 9.6 km)
Resdental areas
(near buldngs)
Up to 1.5 mles
(approxmately 2.4 km)
In steel/ concrete renforced
Up to 250,000 square feet
(approxmately 23,220 m2)
In hgh rses
Up to 20 floors
Note: The listed ranges are based on field testing and may vary with
your operating conditions and individual transceiver.
The RBRC Recycle seal found on KENWOOD
lthum-on (L-on) battery packs ndcates
KENWOOD's voluntary participation in an industry
program to collect and recycle L-on batteres after
ther operatng lfe has expred. The RBRC program
is an alternative to disposing Li-ion batteries with
your regular refuse or in municipal waste streams,
which is illegal in some areas.
For nformaton on L-on battery recyclng n your area, call (toll free)
1-800-8-BATTERY (1-800-822-8837).
KENWOOD's involvement in this program is part of our commitment
to preserve our environment and conserve our natural resources.

background image
FCC LiCense inFOrmatiOn
Your KENWOOD transceiver operates on communications
frequencies which are subject to FCC (Federal Communications
Commsson) Rules & Regulatons. FCC Rules requre that all
operators using Private Land Mobile radio frequencies obtain a
rado lcense before operatng ther equpment. Applcaton for
lcense must be made on FCC form 601, schedules D and H,
and Remttance form 159
FAX: Forms can be obtaned by fax from the FCC Fax-On-
Demand system. Call 1-202-418-0177 from your fax machne
and request document number 000601 for the form, schedules,
and nstructons.
MAIL: Forms can be ordered by telephone, and will be sent to
you by first class mail. Call the FCC Forms Hotline at
1-800-418-FORM (1-800-418-3676).
INTERNET: Form 601 and instructions can be downloaded from
the FCC Forms website at
Before filling out your Form 601 application Technical Data
section, you must decide on which frequencies you will operate.
See the frequency charts on pages 24 and 25.
QUESTIONS? Call the FCC for lcense applcaton questons at
1-888-CALL-FCC (1-888-225-5322).
ChanneL spaCing
The TK-2200L/ TK-3200L uses 12.5 kHz channel spacng as
per the FCC regulations. Transceivers using 12.5 kHz channel
spacing may not have optimal sound quality when used with
transceivers using 25 kHz channel spacing.

background image
One or more of the following statements may be
Ths equpment generates or uses rado frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authorty to operate ths equpment
if an unauthorized change or modification is made.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful nterference n a resdental nstallaton.
Ths equpment generates, uses and can generate rado frequency
energy and, if not installed and used in accordance with the
nstructons, may cause harmful nterference to rado communcatons.
However, there is no guarantee that the interference will not occur
n a partcular nstallaton. If ths equpment does cause harmful
interference to radio or television reception, which can be determined
by turnng the equpment off and on, the user s encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equpment to an outlet on a crcut dfferent from that
to which the receiver is connected.
Consult the dealer for techncal assstance.
The communcatons must be for the purpose of solctng or
rendering assistance to a traveler, or for communicating in an
emergency pertanng to the mmedate safety of lfe or the mmedate
protecton of property.