background image
© B64-4426-00/00 (KW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KMR-330 Serial number
US Residence Only
Register Online
Register your Kenwood product at
w w

background image
2 | KMR-330
Before use
Basic Operation
General functions
Tuner functions
Disc & Audio file play functions
General Operation
Audio Control
Audio Setup
Speaker Setting
Display Switching
Music disc/Audio file Operation
Play Functions of Disc Changer
List Select
Track Select
Menu Operation
Menu System
Activating Security Code
Deactivating Security Code
Manual Clock Adjustment
Auxiliary Input Display Setting
Receive mode Setting
Demonstration mode Setting
Basic Operations of KCA-RC60MR
(Optional accessory)
Accessories/Installation Procedure
Connecting Wires to Terminals
Troubleshooting Guide
The "AAC" logo is a trademark of Dolby Laboratories.
Playing AAC, MP3, and WMA data
This document refers to AAC, MP3, and WMA data
stored in CD-R/RW as "audio files". Refer to the
section on "Audio Files" to control these data. See
<About Audio file> (page 13) for details.

background image
Before use
To prevent injury or fire, take the following
· To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
How to reset your unit
· If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
· Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
· If you experience problems during installation,
consult your Kenwood dealer.
· When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
· The characters which can be displayed by this unit
are A-Z 0-9 @ " ` ` % & * + ­ = , . / \ < > [ ] ( ) : ; ^ - { } |
~ .
· The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
· Do not touch the recording surface of the CD.
· Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
· Do not use disc type accessories.
· Clean from the center of the disc and move
· When removing CDs from this unit, pull them out
· If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
· CDs that are not round cannot be used.
· CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
· This unit can only play the CDs with
This unit may not correctly play discs which do not
have the mark.
· You cannot play a CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)

background image
4 | KMR-330
General functions
Power/Source Select button
Turns on the power.
When the power is on, the source switches between
Tuner ("TUNER"), CD ("CD"), Auxiliary input ("AUX"), and
Standby ("STANDBY") each time this button is pressed.
Press at least 1 second to turn off the power.
· The power will be turned off automatically after about 20
minutes have elapsed under the standby mode.
· When an optional accessory is connected, the source name
for each device appears.
Volume control
Control knob
Turn the knob to adjust the volume.
Faceplate release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
· The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
· Keep the faceplate in its faceplate case while detached.
· Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
· To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Auxiliary input
Auxiliary input
Used to connect a portable audio device with mini-
plug cable (3.5 ø).
· Use the mini-plug cable (stereo) which does not have any
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, "CALL" disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output
Control knob
Switches between ON ("SUBWOOFER ON") and OFF
("SUBWOOFER OFF") each time pushing toward down
for at least 2 seconds.
[1] [2] [3] [4] [5] [6]
Control knob
Disc slot Auxiliary input
[ ]
Basic Operation
Disc slot
Auxiliary input
Control knob

background image
Tuner functions
Band select
Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Control knob
Changes the frequency when pushing toward left or
· During reception of stereo stations the "ST" indicator is ON.
Tuning mode select
Switches as follows each time this button is pressed.
Tuning mode
Auto seek
Automatic search for a station.
Preset station seek "SEEK : AUTO2"
Search in order of the stations in
the Preset memory.
Normal manual tuning control.
Preset memory
[1] - [6]
Memorizes the station selected when pressing for at
least 2 seconds.
Auto memory entry
Memorizes 6 stations with good reception
automatically when pressed for at least 2 seconds.
Preset tuning
[1] - [6]
Recalls the memorized station.
Disc & Audio file play functions
Disc play
Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the "IN" indicator is ON.
· 3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Pause and play
Switches between pause and play each time this
button is pressed.
Disc ejection
· You can eject the disc for 10 minutes after switching off the
Music search
Control knob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio file.)
Folder search
Control knob
Changes the folder containing the audio file when
pushing toward up or down.
Select mode
After pressing this button, you can quickly search
songs with the control knob. See <List Select> (page 8)
for details.
Track/ File/ Folder repeat play
Switches between Track Repeat ("TRAC REP ON") and
OFF ("REP OFF") when pressed while playing a CD.
Switches between File Repeat ("FILE REP ON"), Folder
Repeat ("FOLD REP ON"), and OFF ("REP OFF") when
pressed while playing an audio file.
Scan play
Successively plays the intro of the music in the disc or
When Scan Play is turned on, "TRAC SCAN ON"/ "FILE
SCAN ON" is displayed.
Random play
Randomly plays the music in the disc or folder.
When Random Play is turned on, "DISC RDM ON"/
"FOLD RDM ON" is displayed.
Text/Title scroll
Control knob
Scrolls the CD and audio file text display when
pushing toward up for at least 2 seconds.
: Indicates the button etc. to operate.